HP Color LaserJet CM1015 User Manual

							3 Control panel
●HP Color LaserJet CM1015 MFP control panel features
●
Use the two-line display (HP Color LaserJet CM1015 MFP)
●
HP Color LaserJet CM1017 MFP control panel features
●
Use the graphical display (HP Color LaserJet CM1017 MFP)
●
Control-panel menus
ENWW17
 
						

							
HP Color LaserJet CM1015 MFP control panel features
The HP Color LaserJet CM1015 MFP contains the following lights and buttons on the control panel:
NOTEPrint a demo page by pressing the  Scan To and Start Scan  buttons simultaneously.
1Supplies gauges: Displays consumption levels of print cartridges. Appears when the MFP shows the Ready state with
no warnings, or when the MFP shows a warning or error message pertaining to a print cartridge or multiple supplies.
When the supply is empty the gauge displays as empty. Flas hing indicates a single supply is empty. These messages
can display when:
● Missing cartridges
● Incorrectly placed cartridges
● Cartridges with an error
● Some non-HP cartridges
CAUTION
Printing may continue when a non-HP supply is empty. To prevent MFP damage, frequently check
the status of non-HP supplies. See Hewlett-Packard limited warranty statement .
NOTEWhen a “?” displays on-screen, it may be because the s upply is missing, it is a non-HP supply, or the
status is being determined by the MFP.
2Amber activity light : An error has occurred. Printer requires attention.
3Right arrow (>): Press to navigate to the next submenu or the next value in the menu selection list. Also allows cursor
movement forward a single position, or increments a numeric entry.
18 Chapter 3   Control panel ENWW
 
						

							4Cancel (X) : Whenever the Ready light blinks, press to cancel a print job. Pressing this button also exits the control-panel
menus.
5OK:
●Selects a menu item
●Clears some printer-errors
●Acknowledges use of a non-HP supply
6Start Scan: Starts scanning to the previously selected e-mail or folder destination. The MFP can also start a scan if a
destination is not specified.
7Quality: Press the Left arrow or the Right arrow to control copy quality.
8# of Copies: Press the Left arrow or the Right arrow to increase or decrease the number of copies produced.
9Paper: Select the correct output paper size and type settings for the copy.
10Press Start Copy Color to begin a color copy job.
11Press Start Copy Black to begin a monochrome copy job.
12Copy Features: Displays a menu of copy features.
13Lighter/Darker: Press the Left arrow to lighten the copy or the Right arrow to darken the copy.
14Reduce/Enlarge: Press the Left arrow to reduce the copy size or the Right arrow to enlarge the copy.
15Scan To: Displays a list of pre-configured folders and e-mail destinations. To create a new destination, set up the Scan
To destination on the workstation.
16Return to previous menu or menu item button: Backs up one menu screen or one step in the current menu structure.
17Menu: Opens the main menu system.
18Left arrow (
						

							Use the two-line display (HP Color LaserJet CM1015 MFP)
The two-line display shows menus, and messages. The display can be pulled up and angled for better
viewing. Use the arrows on the control panel to navigate the menus on the control panel. Status and
error messages will be displayed on the screen.
Use the control-panel arrows to navigate on the HP Color LaserJet
CM1015 MFP
●Press the Left arrow or Right arrow to navigate through all control panel menus.
●Press Back to return to the previous menu.
●Press OK to make a selection.
20 Chapter 3   Control panelENWW
 
						

							
HP Color LaserJet CM1017 MFP control panel features
The HP Color LaserJet CM1017 MFP contains the following lights and buttons on the control panel:
NOTEPrint a demo page by pressing the  Scan To and Start Scan  buttons simultaneously.
1Graphical display. Message, menus, and supply gauge area.
Supplies gauges: Displays consumption levels of pr int cartridges. Appears when the MFP shows the Ready
state with no warnings, or when the MFP shows a warn ing or error message pertaining to a print cartridge
or multiple supplies. When the supply is empty the gauge displays as empty. Flashing indicates a single
supply is empty. These messages can display when:
● Missing cartridges
● Incorrectly placed cartridges
● Cartridges with an error
● Some non-HP cartridges
CAUTION
Printing may continue when a non-HP supply is empty. To prevent MFP damage,
frequently check the status of non-HP supplies. See Hewlett-Packard limited warranty statement.
NOTE When a “?” displays on-screen, it may be because the supply is missing, it is a non-HP
supply, or the status is being determined by the MFP.
2Amber activity light : An error has occurred. Printer requires attention.
3Up arrow (^): Press to enter the main menu system or navigate to the previous menu item, or previous item
in the selection list.
ENWW HP Color LaserJet CM1017 MFP control panel features 21
 
						

							4Cancel (X): Whenever the Ready light blinks, press to cancel a print job. Pressing this button also exits the
control-panel menus.
5Right arrow (>): Press to navigate to the next submenu or the next value in the menu selection list. Also
allows cursor movement forward a single position, or increments a numeric entry.
6Down arrow (v): Press to navigate to the menu item below the current menu item.
7Start Photo: Press to print one or more photos.
8Proofsheet: Press to print a proofsheet.
9Start Scan: Starts scanning to the previously selected e-mail or folder destination. The MFP can also start
a scan if a destination is not specified.
10# of Copies: Press the navigation arrows to increase or decrease the number of copies produced.
11Lighter/Darker: Press Left arrow to lighten the copy or the Right arrow to darken the copy.
12Press Start Copy Color to begin a color copy job.
13Press Start Copy Black to begin a monochrome copy job.
14Reduce/Enlarge: Displays a list of temporary copy and size changes.
15Copy Features: Displays a menu of copy features.
16Scan To: Displays a list of pre-configured folders and e-mail destinations. To create a new destination, set
up the Scan To destination on the workstation.
17Select Photos: Press to choose one or more photos.
18Photo Features: Press to navigate to select photo features.
19Return to previous menu or menu item: Backs up one menu screen or one step in the current menu structure.
20Left arrow (
						

							Use the graphical display (HP Color LaserJet CM1017 MFP)
The color graphics display shows menus, photos, and messages. The display can be pulled up and
angled for better viewing. Use the arrows on the control panel to navigate the menus on the control
panel and to select photos on the panel for printing. Status and error messages will be displayed on the
screen.
After 60 minutes of inactivity, the color graphics display goes into Sleep State and the screen shuts off
completely. The display turns back on when you perform an operation, such as pressing a control panel
button, or inserting a memory card, accessing the HP All-in-One from a connected computer.
Use the control-panel arrows to navigate on the HP Color LaserJet
CM1017 MFP
●Press the Up arrow or Down arrow to navigate through all control panel menus.
●Press Back to return to the previous menu.
●Press OK to make a selection.
Press the Left arrow or Right arrow to complete the following tasks:
●Increase or decrease values on the horizontal scroll bar on various copy and photo menus.
●Browse photos on the graphical display from your memory card.
●Enter an IP address.
ENWW Use the graphical display (HP Color LaserJet CM1017 MFP) 23
 
						

							Control-panel menus
Use the control-panel menus
To gain access to the control-panel menus, use the following steps.
1.Press Menu.
2.On the HP Color LaserJet CM1015 MFP, press Left arrow or Right arrow to navigate the listings.
On the HP Color LaserJet CM1017 MFP, press Up arrow or Down arrow to navigate the listings.
●Press OK to select the appropriate option.
●Press Cancel to cancel an action or return to the Ready state.
●Press Back to move to the previous menu.
Control-panel menu map
These menus are available from the control panel Main menu:
●Use the Copy setup menu to configure basic copy default qualities.
●Use the Reports menu to print reports that provide information about the printer.
●Use the Photo setup menu to configure defaults for photo printing.
●Use the System setup menu to establish basic printer settings. The System setup has several
sub-menus. Each is described in the table.
●Use the Service menu to restore default settings, clean the printer, and activate special modes
that affect print output.
●Use the Network config. menu to configure network settings.
Table 3-1  Copy Setup Menu
Menu itemSub-menu itemSub-menu itemDescription
Default Quality  Sets the default copy quality.
Default light/dark  Sets the default lighter/darker
option.
Default Reduce/Enlarge  Sets the default percentage to
reduce or enlarge a copied
document.
Default # of copies  Sets the default number of
copies.
AdvancedColor BalanceRed
Green
BlueIncreases or decreases the
amount of these colors in the
output.
 Background  Increases or decreases the
background color in a copy.
24 Chapter 3   Control panelENWW
 
						

							Menu itemSub-menu itemSub-menu itemDescription
 Contrast Increases or decreases the
differences between whites
and blacks of a copy.
 Lightness Increases or decreases the
background color in a copy.
 Grayness Increases or decreases the
color in the color copy of a
black and white original.
 Sharpen Increases or decreases the
reproduction details in a copy.
 Restrict color Permits the enabling or
disabling of color copies.
Restore defaults  Sets all customized copy
settings to the factory default
values.
Table 3-2  Reports Menu
Menu ItemDescription
Demo pagePrints a color page that demonstrates
print quality.
Menu structurePrints a control-panel menu layout map.
The active settings for each menu are
listed.
Configuration reportPrints a list of all the printer settings.
Includes network information when the
printer is connected to the network.
Supplies status pagePrints the status of each print cartridge.
Includes this information:
●Estimated pages remaining
●Serial number
●Number of pages printed
Network reportDisplays status for:
●Network hardware configuration
●Enabled features
●TCP/IP and SNMP information
●Network statistics
Usage pageDisplays number of pages printed by the
MFP.
PCL font listPrints a list of all installed PCL fonts.
PS font listPrints a list of all installed PS fonts.
Table 3-1  Copy Setup Menu (continued)
ENWWControl-panel menus 25
 
						

							Menu ItemDescription
PCL6 font listPrints a list of all installed PCL6 fonts.
Service pageStarts the cleaning mode and restores
factory settings.
Table 3-3  Photo Setup Menu (Available only from HP Color LaserJet CM1017 MFP)
Menu ItemDescription
Default image sizeSet up default image size.
Default light/dark
Default # of copiesSet up default number of copies.
Default output colorSet up default output color.
Restore defaultsResets all photo items to their factory defaults. Machine does
not power cycle.
Table 3-4  System Setup Menu
Menu ItemSub-menu itemSub-menu itemDescription
Language  Select the language in which
the control panel displays
messages and printer reports.
Paper setupDefault paper sizeLetter
A4
LegalSelect the size for printing
internal reports or any print
job that does not specify a
size.
 Default paper typeLists available media types.Select the type for printing
internal reports or any print
job that does not specify a
type.
 Tray 1Paper size
Paper typeFrom the displayed list, select
the default size and type for
tray 1.
 Tray 2Paper size
Paper typeFrom the displayed list, select
the default size and type for
tray 2.
 Tray 3 (optional)Paper size
Paper typeFrom the displayed list, select
the default size and type for
optional tray 3.
 Paper-out action Wait forever
Override
Cancel jobDetermines how the printer
reacts when a print job
requires a size or type that is
unavailable or when a
specified tray is empty.
Select Wait forever to make
the printer wait until the
correct media is loaded.
Table 3-2  Reports Menu (continued)
26 Chapter 3   Control panelENWW