HP Business InkJet 1200D User Manual
Have a look at the manual HP Business InkJet 1200D User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ENWW 89 C Printer specifications Printer specifications For media and media-handling specifications, see Selecting print media. Physical specifications Available models and physical dimensionsSize (width by depth by height)506 by 419 by 211 mm (19.9 by 16.5 by 8.3 inches) zWith auto-duplex unit: 506 by 464 by 211 mm (19.9 by 18.3 by 8.3 inches) zWith tray 2: 506 by 419 by 275 mm (19.9 by 16.5 by 10.8 inches) Weight (does not include printheads or ink cartridges)9 kg (19.8 lb) zWith auto-duplex unit: 9.4 kg (20.7 lb) zWith tray 2: 12 kg (26.5 lb) Product features and capacities ConnectivityzIEEE 1284-compliant bidirectional parallel (all models) zUSB 2.0-compliant full speed (all models) zFast Ethernet 10/100Base-TX for wired network connection (HP Business Inkjet 1200dn/1200dtn/ 1200dtwn) z802.11b/g wireless network (HP Business Inkjet 1200dtwn) Print method Drop-on-demand thermal inkjet printing Ink cartridges 4 ink cartridges (1 each for black, cyan, magenta, and yellow) Printheads 4 printheads (1 each for black, cyan, magenta, and yellow) Supply yields (based on 5% coverage)Ink cartridges 1,750 pages Printheads zBlack: 16,000 pages zCyan, magenta, and yellow: 24,000 pages Color calibration zColorSync zICC Profiles Device languages HP PCL 3 enhanced Font support zUS fonts: CG Times, CG Times Italic, Universe, Universe Italic, Courier, Courier Italic, Letter Gothic, Letter Gothic Italic. zBuilt-in support for Arabic and Hebrew symbol sets Duty cycle Up to 6,250 pages per month
90 C - Printer specificationsENWW Processor and memory specifications Device processorzMotorola 32-bit ColdFire 4e HPA (240 MHz) Device memory z32 MB built-in RAM z4 MB built-in Flash ROM Operating system and network protocol specifications Operating system compatibilityzWindows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows XP 32-bit (Professional and Home Editions), and Windows 2003 zMac OS 9 (9.1 and later), Mac OS X (10.1.5 and later) zIBM OS/2 zLinux zMS-DOS printer driver support through third-party applications System requirements Note: Graphic- intensive, complex, and large files might require more hard disk space. Minimum zWindows 98: Pentium® 90 MHz, 16 MB RAM, 145 MB free hard disk space zWindows Me: Pentium® 90 MHz, 32 MB RAM, 145 MB free hard disk space zWindows NT 4.0 (Service Pack 6 or later): Pentium 100 MHz, 32 MB RAM, 145 MB free hard disk space zWindows 2000: Pentium 300 MHz, 64 MB RAM, 145 MB free hard disk space zWindows XP 32-bit edition: Pentium 233 MHz, 64 MB RAM, 145 MB free hard disk space zMac OS 9 (9.1 and later): 32 MB RAM zMac OS X (10.1.5 and later): 128 MB RAM Recommended zWindows 98, and Windows Me: Pentium 266 MHz, 32 MB RAM, 175 MB free hard disk space zWindows NT 4.0 (Service Pack 6 or later): Pentium 266 MHz, 64 MB RAM, 175 MB free hard disk space zWindows 2000: Pentium 300 MHz, 64 MB RAM, 175 MB free hard disk space zWindows XP 32-bit edition: Pentium 300 MHz, 128 MB RAM, 175 MB free hard disk space zMac OS 9 (9.1 and later): 64 MB RAM zMac OS X (10.1.5 and later): 128 MB RAM
ENWW 91 Network operating system compatibility zWindows 98, Windows Me, Windows NT 4.0, Windows 2000, Windows XP 32-bit (Professional and Home Editions) zMac OS 9 (9.1 and later), Mac OS X (10.1.5 and later) zMicrosoft Windows Terminal Server Edition 4.0 zMicrosoft Windows 2003 Server (formerly known as Microsoft Windows XP Server Terminal Services) zMicrosoft Windows 2000 Server Terminal Services with Citrix MetaFrame 1.8 zMicrosoft Windows 2003 Server Terminal Services with Citrix MetaFrame 1.8 zMicrosoft Windows NT and Windows 2000 Server Terminal Services with Citrix V1.8 zMicrosoft Windows NT and Windows 2000 Server Terminal Services with Citrix XP zMicrosoft Windows 2000 Server Terminal Services Compatible network protocols zTCP/IP Network managementHP Web Jetadmin plug-ins Embedded Web serverFeatures zAbility to remotely configure and manage network devices zJob accounting zHP myPrintMileage System requirements zTCP/IP-based network (IPX/SPX-based networks are not supported) zA Web browser (either Netscape Navigator 4.8 or Microsoft Internet Explorer 5.0 or later) zNetwork connection. (You cannot use the embedded Web server when the printer is connected directly to a computer.) zInternet connection (for some features) You can open and use the embedded Web server without being connected to the Internet. However, some features will not be available. zMust be on the same side of a firewall as the printer
92 C - Printer specificationsENWW Functional specifications Speed (U.S. Letter and A4) FA S T m o d e : Black text: 28 pages per minute (ppm) Mixed text with color graphics: 24 ppm FAST NORMAL mode: Black text: 15 ppm Mixed text with co lor graphics: 13 ppm NORMAL mode: Black text: 9 ppm Mixed text with co lor graphics: 8 ppm BEST mode: Black text: 8 ppm Mixed text with co lor graphics: 4 ppm Laser-quality speed*: Black text: 6.8 ppm Mixed text with co lor graphics: 6 ppm *The “laser-quality speed” comparison has the page-per-minute speeds of the HP Business Inkjet 1200 series printer against the benchmark of the HP Color LaserJet 4600 at comparable pr int quality. This comparison is based solely on HPs internal testing. Resolution Black: Up to 1,200 by 600 dpi with pigmented black ink Color: HP enhanced Color Layering Technology with PhotoREt III for photo quality (up to 4,800 by 1,200-optim ized dpi on HP premium photo papers, 1,200 by 1,200-input dpi) Environmental specifications Operating environment Operating temperature5° to 40° C (41° to 100° F) Recommended operating conditions 15° to 35° C (59° to 95° F) Recommended relative humidity 15 to 80 percent noncondensing Storage environment Storage temperature-40° to 70° C (-40° to 158° F) Storage relative humidity Up to 90 percent noncondensing at a temperature of 65° C (150° F) Electrical specifications Power supply Universal power adapter Power requirements Input voltage: 110 to 240 VAC (± 10 percent), 50 to 60 Hz Output supply: 31-32 Vdc, 2200mA Maximum allowable power consumption 70 to 75 Watts Acoustic emission specifications (print in Draft mode, noise levels per ISO 7779) Sound pressure (bystander position) LpAm 54 dB(A) Sound power LwAm 61 dB(A)
ENWW 93 D Regulatory information FCC statement The United States Federal Communications Commission (in 47 cfr 15.105) has specified that the following notices be brought to the attention of users of this product. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Shielded cables Use of a shielded data cable is required to comply with the Class B limits of Part 15 of the FCC Rules. Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by the Hewlett-Packard Company, may cause harmful interference and void the FCC authorization to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: zReorient or relocate the receiving antenna. zIncrease the separation between the equipment and receiver. zConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. zConsult the dealer or an experienced radio/TV technician for help. Exposure to radio frequency radiation CAUTIONThe radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. This product and any attached external antenna, if supported, shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
94 D - Regulatory informationENWW EMI statement (Korea) VCCI statement (Japan) Regulatory model number For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SNPRC-0401-01 (HP Business Inkjet 1200/ 1200d/1200dn/1200dtn) or SNPRC-0401-02 (HP Business Inkjet 1200dtwn). This regulatory number should not be confused with the marketing name (HP Business Inkjet 1200) or product number (C8169A, C8154A, C8170A, C8155A, C8156A). Power cord statement The power cord cannot be repaired. If it is defective, it should be discarded or returned to the supplier.
ENWW 95 LED classification Regulatory notices for wireless products Notice to users in Canada/Note à l’attention des utilisateurs Canadien For Indoor Use. This digital apparatus does not exceed the Class B limits for radio noise emissions from the digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. The internal wireless radio complies with RSS 210 of Industry Canada. For Indoor Use. Le présent appareil numérique n’émet pas de bruit radioélectrique dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada. Le composant RF interne est conforme a la norme CDN-210 d’Industrie Canada.
96 D - Regulatory informationENWW ARIB STD-T66 (Japan) Notice to users in Italy License required for use. Verify with your dealer or directly with General Direction for Frequency Planning and Management (Direzione Generale Pianificazione e Gestione Frequenze). E’necessaria una concessione ministeriale anche per l’uso del prodotto. Verifici per favore con il proprio distributore o direttamente presso la Direzione Generale Pianificazione e Gestione Frequenze. Notice to users in France For 2.4 GHz Wireless LAN operation of this product certain restrictions apply: This equipment may be used indoor for the entire 2400-2483.5 MHz frequency band (channels 1-13). For outdoor use, only 2454-2483.5 MHz frequency band (channels 10-13) may be used. For the latest requirements, see http://www.art-telecom.fr. Pour une utilisation en rseau sans fil 2,4 GHz de ce produit, certaines restrictions s’appliquent : cet appareil peut tre utilis l’intrieur des btiments sur toute la bande de frquences 2400-2483,5 MHz (canaux 1 13). Pour une utilisation l’extrieur des btiments, seule la partie 2454-2483,5 MHz (canaux 10 13) peut tre utilise. Pour connatre les dernires rglementations en vigueur, consultez le site Web http://www.art-telecom.fr.
ENWW 97 Notice to users in the European Union Radio products with the CE 0984 or CE alert marking comply with the R&TTE Directive (1999/5/EC) issued by the Commission of the European Community. NoteLow-power radio LAN product operating in 2.4-GHz band, for Home and Office environments. In some countries/regions, using the product may be subject to specific restrictions as listed for specific countries/regions below. This product may be used in the following EU and EFTA countries/regions: Austria, Belgium, Denmark, Finland, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Sweden, Switzerland and United Kingdom. For normal wireless LAN operation of this product, only a limited band is available in France (Channels 10, 11, 12 and 13). L’Autorité de régulation des télécommunications (ART) has special regulations for hotspots allowing additional channels. For more information, including local rulings and authorization, please see the ART website: http://www.art-telecom.fr.
98 D - Regulatory informationENWW Declaration of conformity HP Business Inkjet 1200/1200d/1200dn/1200dtn printer DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturers Name: Hewlett-Packard Singapore (Pte) Ltd. Manufacturer’s Address:Imaging and Printing Manufacturing Operation Singapore 60 Alexandra Terrace, #07-01, The Comtech, Singapore 118502 declares, that the product Product Name:HP Business Inkjet 1200, HP Business Inkjet 1200d, HP Business Inkjet 1200dn, HP Business Inkjet 1200dtn Product Number:C8169A, C8154A, C8170A, C8155A Regulatory Model Number (1):SNPRC-0401-01 Product Accessory Number:C8254A / 250 sheet Tray 2 C8253A / HP auto-duplexer unit Product Options:All conforms to the following Product Specifications: Safety:IEC 60950-1: 2001 / EN 60950-1: 2001 IEC 60825-1: Edition 1.2: 2001/ EN 60825-1+A11+A2+A1: 2002 Class 1(Laser/Led) EMC:CISPR 22: 1997 / EN 55022:1998 Class B (2)(3) CISPR 24:1997 + A1 / EN 55024: 1998 + A1 IEC 61000-3-2:2000 / EN 61000-3-2:2000 IEC 61000-3-3 / A1:2001 / EN 61000-3-3 / A1:2001 FCC Title 47 CFR, Part 15 Class B / VCCI-2 (2) ICES-003, Issue 4 Supplementary Information: The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE marking accordingly. (1) The product is assigned a Regulatory model number that stays with the regulatory aspects of the design. The Regulatory Model Number is the main product identifier in the regulatory documentation and tests reports, this number should not be confused with the marketing name or the product numbers. (2) The product was tested in a typical configuration with Hewlett-Packard personal computer systems. (3) Excepting clause 9.5 which was not applied. Singapore, 30 April 2004 Chan Kum Yew Director, Quality Local Contact for regulatory topics only: European Contact: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany USA Contact: Hewlett-Packard Company, HPCC, 20555 S.H. 249 Houston, Texas, 77070 Australia Contact: Hewlett-Packard Australia Ltd, Product Regulations Manager, 31-41 Joseph Street, Blackburn, Victoria 3130, Australia