GTE Omni Si Database Technical Practices Issue 1 Manual

- --TL-130100-1001
4.11Called Station Does Not Answer
4.11.1Attendant Stays With Calling Party When Extending a Call
STEPOPERATIONRESULT
1Incoming call received by Attendant
Console.(a) Ringing heard.
(b) LOOP LED (l-4) flashes.
2Depress LOOP. pushbutton
associated with the flashing LOOP
LED.(a) LOOP LED on.
(b) Source appears in display.
(c) POS RLSE LED on.
(d) START/STOP LED on.
(e) Ringing stops.
(f) Transmission established between
trunk and Attendant Console.
3Dial station number.(a) EXCL SRCE LED...

l-.,-.-. .-TL-130100-1001
STEP
OPERATION
RESULT
3Dial station number.(e) Ringing heard.(f) Transmission established between
trunk and Attendant Console.
(a) EXCL SRCE LED on.
(b) Fixed display cleared.(c) Calling party placed on hold in
exclude-source state.
(d) 
Ringback tone heard.
(e) Dialed digits appear on fixed
display.
(f) START/STOP LED off.
(g) Called station does not answer
4Depress POS RLSE pushbutton.
(a) POS RLSE LED off.
(b) LOOP LED off.
(c) Calling party extended to station
and hears...

TL-130100-10014.11.3Attendant Consults With Calling Party When Extending Call to a
Busy Station
STEPOPERATIONRESULT
1Incoming call received by Attendant
Console.(a) Ringing heard.
(b) LOOP LED (l-4) flashes.
2Depress LOOP pushbutton(a) LOOP LED on.
associated 
with.flashing LOOP LED.(b) Source appears in display.
(c) START/STOP LED on.
(d) POS RLSE LED on.
(e) Ringing stops.(f) Transmission established between
trunk and Attendant Console.
3
4Dial station number.
Depress DEST RLS pushbutton.(a) EXCL SRCE...

TL-130100-1001
STEPOPERATION_
RESULT
(e) Dialed digits appear on the display.
(f) START/STOP LED off.8Depress POS RLSE pushbutton.
(a) POS RLSE LED off.
(b) LOOP LED off.
(c) EXCL SRCE off.
(d) Display cleared.
(e) TOD displayed.
(f) Calling party hears ringback.
4.12
Break-InThe attendant exclusion and attendant break-in features are mutually
exclusive. The attendant exclusion feature denies the attendant break-in
capabilities by making the BRK IN pushbutton function inoperative. If this
feature is...

TL-130100-1001 :_ : ... .  .,.STEPOPERATIONRESULT
4Allow warning tone time out to occur.(a) Warning tone to attendant ceases.
(b) Transmission established between
attendant and both stations (three-way
conversation).
5Release BRK IN pushbutton.(a) BRK IN LED off.
(b) Original two-way conversation
continues.
(c) 
60-IPM busy tone heard in console
headset.
6Depress POS RLSE pushbutton.(a) LOOP LED off.
(b) POS RLSE LED off.
(c) EXCL SRCE or EXCL DEST LED off if
(d) 
Fked display cleared.
(e) Trunk and...

TL-138100-1001STEPOPERATION
‘_ ‘:
RESULT(c) EXCL SRCE or EXCL DEST LED off if
(d) 
OFZed display cleared.
(e) Trunk and station identification cleared
from variable display.
(f) Class-of-service digits cleared if
present.
(g) TOD displayed.
,
4.12.3Break-h on a Broken-In Line Condition
STEPOPERATIONRESULT
1Depress an idle LOOP pushbutton
(1-4) on Attendant Console 1.(a) LOOP LED on.
(b) POS RLSE LED on.
(c) START/STOP LED on.
(d) Dial tone heard.
2Dial number of a station known to be
busy in a two-way...

TL-130100-1001
STEPOPERATIONRESULT7Release BRK IN pushbutton on Atten-
BRK IN LED off.
dant Console 2.
8Depress POS RLSE pushbutton on
Attendant Console 2.(a) LOOP LED off.
(b) POS RLSE LED off.
(c) EXCL SRCE or EXCL DEST LED off if(d) 
%ed display cleared.
(e) Trunk and station identification cleared
from variable display.(f) Class-of-service digits cleared if
present.
(g) TOD displayed.
9Release BRK IN pushbutton on Atten-(a) BRK IN LED off.
dant Console 1.(b) Original two-way connection continued....

-TL-130100-1001
STEP
OPERATION
RESULT
4Depress and hold BRK IN pushbutton.(a) BRK IN LED flutters when released.
(b) “BREAK-IN DENIED” appears on
display.(c) 
60-IPM busy tone heard.
5Release BRK IN pushbutton
6Depress POS RLSE pushbutton.BRK-IN LED off.
(a) LOOP LED off.
(b) POS RLSE LED off.
(c) EXCL SRCE or EXCL DEST LED off if(d) 
Fked display cleared.
(e) Trunk and station identification cleared
from variable display.(f) Class-of-service digits cleared if
present.
(g) TOD displayed.4.13
Camp-On
The...

TL-130100-1001 ,;STEPOPERATIONRESULT
3Dial number of station known to be
busy.(a) EXCL SRCE LED on.
(b) Dialed digits displayed in fixed display.
(c) START/STOP LED off.(d) 
60-IPM busy tone heard.
4
Depress CAMP-ON pushbutton.(a) POS RLSE LED off.
(b) EXCL SRCE LED off.
(c) LOOP LED off.
(d) CAMP-ON LED on until key reteased.(e) Trunk is camped on busy line.
(f) Camped-on station hears burst of
camp-on tone.
(g) TOD displayed.
5Allow time out to occur, while keeping
station off-hook.(a) Ringing heard....

 rSTEP
OPERATIONRESULT10From attendant, make a call to busy
station. Depress CAMP-ON
pushbutton.(a) POS RLSE LED off.
(b) LOOP LED off.
(c) TOD displayed.
(d) Station hears burst of camp-on tone.
11Before the time out occurs, place
station on-hook.(a) Trunk receives ringback tone.
(b) Camped-on station receives ringing.
12Answer camp-on call at station.(a) Ringback tone to trunk stops.
(b) Ringing ceases.
(c) Transmission established between trunk
and station.
13Place station on-hook.(a) Station returns...