GTE Omni Si Database Technical Practices Issue 1 Manual

TL-130100-1001
STEPOPERATIONRESULT5
6(e) Camped-on station does not hear
burst of camp-on tone.
(f) TOD displayed.
Before time out occurs, place station(a) Trunk receives ringback tone.
on-hook.(b) Camped-on station receives ringing.
Answer camp-on call at station.(a) 
Ringback tone to trunk stops.
(b) Ringing stops.
(c) Transmission established between
trunk and station.
7Go on-hook.(a) Station returns to idle state.
(b) Trunk returns to idle state.
4.13.3Attendant Camp-On Not Equipped...

TL-130100-1001STEPOPERATIONRESULT
5Depress POS RLSE pushbutton.(a) POS RLSE LED off.
(b) LOOP LED off.
(c) TOD displayed.
(d) EXCL SRCE off.
(e) Fixed display cleared.
4.14
Answering Station Recall and Transferring to Inside Party
STEPOPERATIONRESULT
1Incoming call to Attendant Console
has been extended to a station,
and station is now recalling by
flashing hookswitch and dialing
attendant access code.
2Depress flashing LOOP LED
pushbutton to answer recalling
party.
NOTE:If the station releases...

- -TL-130100-1001
STEPOPERATIONRESULT
NOTE:
In case of misdial, depress DEST RLS pushbutton and then depress START/STOPpushbutton again. When dial tone heard, dial correct station number.
7Depress POS RLSE pushbutton torelease call. Attendant does not
need to remain with call until
called station answers.(a) LOOP and POS RLSE 
LEDs off.
(b) Trunk-and-station-number display off.(c) Type-of-call display off.
(d) Class-of-service digits display off if
station or tie-line call.(e) Ringing station and calling...

‘.- -TL-130100-1001
STEPOPERATION
RESULT
(c) START/STOP LED off.
8inform station user of nature of call
when station user answers.
9Depress POS RLSE pushbutton torelease call.(a) LOOP, POS RLSE, and EXCL SRCE
LEDs off.
(b) Fixed display clears.
(c) TOD displayed.NOTES:
1.Provision of tick tone is a data base programmable option and shall be provided
together with block transmission data base option.
2.If three-way connection desired, depress EXCL SRCE pushbutton before releasing
call (EXCL SRCE LED goes...

TL-130100-1001
STEP
OPERATIONRESULT6Dial directory number of the outside
option party.(a) Ringback tone and tick tone heard (if
option provided).
(b) Dialed digits appear on fixed display.
7Depress START/STOP pushbutton.(a) START/STOP LED off.
(b) Tick tone stops.
8When outside party answers, inform
party.of nature of call.
9Depress POS RLSE pushbutton to
release call.(a) LOOP, POS RLSE and EXCL SRCE
LEDs go off.
(b) Display clears.
(c) TOD displayed.
NOTE:
Provision of tick tone is a data base...

 r- -TL-130100-1001
STEPOPERATIONRESULT
6When station user answers, inform
station user of nature of call.
7Depress POS RLSE pushbutton to(a) LOOP, POS RLSE and EXCL SRCE
release call.
LEDs off.
(b) Display clears.
(c) TOD displayed.
4.15.4 Outside-to-Outside Call
STEPOPERATIONRESULT
1Depress idle LOOP pushbutton (l-4).(a) LOOP LED on.
(b) POS RLSE on.
(c) START/STOP LED on.
(d) Dial tone heard.
2
3Dial outside access code.Second dial tone and tick tone heard.
Dial directory number of outside party.(a)...

- . .T.L-130100-1001
STEPOPERATION
RESULT
11Depress POS RLSE pushbutton torelease call.(a) LOOP, POS RLSE, and EXCL SRCE
LEDs off.
(b) Display clears.
(c) TOD displayed.(d) Two trunk parties are connected.
(e) If neither trunk party has supervision,
LOOP LED flashes.NOTE:
Provision of tick tone is a data base programmable option and shall be provided
together with block transmission data base option.4.16
Series Calling
4.16.1Trunk to Line
STEP
OPERATIONRESULT
1Incoming CO trunk call placed to
Attendant...

- -TL-130100-1001
STEP
OPERATION
RESULT
5Called station goes off-hook.
(a) Ringing removed from station.
(b) 
Ringback tone removed from calling
trunk.
(c) Transmission established between
station and trunk.
6Place called station on-hook.
(a) Ringing heard.
(b) LOOP LED flashes at 60 IPM.
(c) Trunk receives 
ringback tone.
(d) Trunk diverted to Attendant Console.
7Depress flashing LED LOOP
pushbutton.(a) Ringing stops.
(b) LOOP LED on.
(c) START/STOP LED on.
(d) POS RLSE LED on.
(e) Trunk number appears...

TL-130100-1001
STEPOPERATIONRESULT2Depress flashing LED LOOP
pushbutton (l-4).(a) LOOP LED on.
(b) ‘“INFORMATION” appears in fixed
display field.
(c) Line number appears in variable
display field.
(d) START/STOP LED on.
(e) POS RLSE LED on.
(f) Ringing stops.
(g) Transmission established between
line and attendant.
NOTE: 
-As an alternate to Steps 1 and 2, the attendant can initiate the call to the station and
then proceed with Step 3.
3Dial number of outgoing trunk
group access code followed by
trunk...

TL-130100-1001STEPOPERATIONRESULT
9Depress POS RLSE pushbutton.(a) LOOP LED off.
(b) POS RLSE LED off.
(c) EXCL SRCE or EXCL DEST LED off if(d) 
%ed display cleared.
(e) Trunk and station number cleared from
variable display.(f) Class-of-service digits cleared if
present.
(g) TOD displayed.
4.16.3Line to Line and Series Call Release (Invalid Condition)
STEPOPERATIONRESULT
1Attendant called from one of the
station lines.
2Depress flashing LED LOOP(a) LOOP LED on.pushbutton (l-4).(b) “INFORMATION” appears...