GTE Omni Si Database Technical Practices Issue 1 Manual

_- .:TL-130100-1001
STEPOPERATIONRESULT
3
4NOTES:
1.
2.
3.
4.
5.
6.(b) Any feature button programmed
for dual mode use is shifted to its
alternate function.
To exit shift mode, depress SHIFT a
second time.
Depress feature button.(c) Feature name appears.
(a) SHIFT LED off.
(b) BOTTOM LED off.
Feature is functional.
Only one SHIFT button may appear on the keyboard.
The SHIFT button (on the instrument itself or on the add-on module) may not have
an alternate function.
LINE buttons (which can only appear on...

TL-130100-1001STEPOPERATIONRESULT
2
3
4
5
NOTES:
1.
2.(c) “FX 
XxXx--” Call Source.
Converse with caller.
To terminate call, depress SPKRPH(a) SPKRPH LED off.
a second time.(b) Display clears.To initiate a call, seize a line and
Varies.dial by any of the methods previously
discussed, depress SPKRPH to
converse.To mute the microphone while on a
(a) MONTR LED on.
Speakerphone call, depress MONTR.(b) Microphone disabled.Whenever the instrument is off-hook or when the Speakerphone or Monitor are on,
and the...

TL-130100-1001
The phone can be unlocked by the user upon entering the proper code or by
the system (switch).(a>Station Lock - Lock Operation
STEPOPERATIONRESULTBegin in an idle on-hook state.
1To activate the lock, depress LOCK.(a) LOCK LED on.
(b) “STATION LOCKED”
(c) Display clears or reverts to the time
and date.
2Any attempt to access features
locked will cause(a) Triple beep heard.
(b) “STATION LOCKED”
(WStation Lock - Unlock Operation
STEPOPERATIONRESULTBegin from an idle on-hook or talking...

TL-130100-10013.7.47
Time and Date “CLOCK”The time and date feature button displays the correct time, day, and date
whenever depressed. A second depression of the button, while the time/date
display is active, will restore the display to its former use.
In addition to the time and date button, the instrument can be programmed to
display automatically the correct time, day, and date whenever the phone is
idle. The time/date display will remain until preempted by a higher priority
function (i.e., phone...

TL-130100-1001
(3) Call On Hold
(4) idle Line(5)Request For InputThe secondary status indicator will provide the I-USE indication when the
user is off-hook on a particular line, the I-HOLD indication when the user
has placed a call on hard hold, or it will indicate the preselected or
preference line choice when the instrument is on-hook.
NOTES:
1.
2.
3.
4.
52108187o-141
- -The single-line on the single-line set may be either a
single-set line or a multi-set line.The single-line on the single-line set...

THIS PAGE INTENTIONALLY LEFT BLANK.
5210 

4.0ATTENDANT CONSOLE4.1GeneralThe Attendant Console, shown in Figure 4.1, is a microprocessor-controlled,
desk-top console, that provides total control and flexibility for processing
calls through the system. The attendant can place the Attendant Console in
other control modes during nighttime, maintenance, or unattended periods.
The Attendant Console contains compact electronics and all controls and
indicators needed for complete monitoring and controlling of calls through the
system. Both incoming and...

TL-130100-1001Figure 4.1 Attendant Console
Em75210 

TL-130100-1001
VARIABLE DISPLAYS CHARACTERS 1-16FIXED DISPLAYS CHARACTERS 1-16IO
432 APHANUMERIC CHARACTER DISPLAY*STAFFEDINITIALIZATION
JDICATORREQUESTINDICATOR
nnnnnnr--rnnII5210
rlgure 4.1 Anenaarir ~OI~SUI~:, b01 ILIUIJ, a~ IU II iuitiawt 3
ELECTRONIC RINGER VOLUME CONTROL. Slide bar located on the
right rear of the Attendant Console and used only to increase or
decrease the ringer volume.
REQUEST FOR INITIALIZATION LED. Flashes when the Attendant
Console is initialized, and goes off when complete....

l-L-1 30100-1001
BAD LINE. Allows the posting of a bad line report on the maintenance
teletypewriter if the pushbutton is depressed when a complete connection is
present.
SPARE. Reserved for future enhancements.TfME [TIME OF DAY (TOD)]. Allows the attendant to override any variable
display with the time-of-day display in hours and minutes.
PAGE. Allows direct access to the paging system as long as the pushbutton
is depressed.
PAGE 
Q (PAGE QUEUE). Allows placement of an incoming call in a page-queue hold...