Home > GTE > Communications System > GTE Omni Si Database Technical Practices Issue 1 Manual

GTE Omni Si Database Technical Practices Issue 1 Manual

Here you can view all the pages of manual GTE Omni Si Database Technical Practices Issue 1 Manual. The GTE manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 91

TL-130100-1001
STEPOPERATIONRESULT
If successful,(a) A 3-party connection is made.
(b) OVWDE LED is on.
(c) Broken-into stations hear busy
override tone, and if integrated
Featurephone “XXXX
OVERRIDE” displayed.If unsuccessful,
(a) OVRIDE LED off.
(b) Reorder tone heard.
(c) “REQUEST DENIED”
2Both parties in the overridden
conversation will receive.
52103.7.7Call-Announcing “VOICE” (26, 27)
Call Announcing provides the ability to make calls within a restricted group of
phones, and receive priority-call...

Page 92

TL-130100-I 001Call Announcing “VOICE”
STEPOPERATIONRESULT
1Go off-hook or depress monitor or
(a) Dial tone heard.
speakerphone.
(b) “PLEASE DIAL”
2
3Depress VOICE.
VOICE LED on.
Release VOICE.
4Depress a DSS or line button. If DSS
or line button does not permit call
announcing, the depression is
treated as an error.(a) VOICE LED flashes at 120 IPM.
(b) “NUMBER = 
”-(a) VOICE LED on.
(b) “NUMBER = 
XxXx”
5a. If call is answeredl/2-second tone burst heard.
b. If called party is busy and receiving...

Page 93

--.TL-130100-1001
,
3.7.8Call Forward “FVVD” (19)The Call Forward feature enables the user to have calls directed to his phone
forwarded to another phone ‘within the switch. The features are activated and
deactivated under user control at any time (with some restrictions). The
feature options include:
(4Calls may be forwarded automatically, manually, or not at all.
(1)Calls may be automatically forwarded by the phone when the
feature is activated.
(2)Calls may be forwarded manually by the user on a...

Page 94

- .-TL-130100-1001
Call Forward and Special Call Forward, Operation
STEPOPERATIONRESULT
1To activate, depress FWD or SP FWD. (a) Associated LED lights.
(b) Feature activated.
2To deactivate, depress FWD or SP
(a) LED off.
FWD a second time.(b) Feature deactivated.
3.7.9Call Wold “#OLD” (24)
Hold permits an existing call to be temporarily placed in a hold condition and
to be retrieved by the station that placed the call on hold, or by another station
with an appearance for that line. Exclusive Hold allows...

Page 95

. .:.TL-130100-1001
STEPOPERATIONRESULT
(b) “CALL HELD”
See Visual Signals, Table 3.1.OR
If hold is unsuccessful,(a) Hold LED will return to original status.
(b) Reorder tone heard.(c) “REQUEST DENIED”. Line 
LEDs
unaffected.User may flash to return to party or
re-attempt hold.
2To originate a new call, depress
NEW CALL, FLASH, or select a
new line.See appropriate paragraph.See also: Primary Line
Secondary Line
5210 

Page 96

 rTL-130100-I 001(3)
(4
(5)
(6)
(7)
(8)The Call Park capabilities are subject to the switch 
class-of-service restrictions.
The phone’s prime-line directory number will be used as
the park-to and park-retrieve default number. -Only the
phone whose control line a call is parked to will be notified of
the retrieval or abandon of that parked call. The parking
phone will not be notified unless it is also the parked-to
phone.
The phone will distinguish between a call park and a park
retrieve by whether the...

Page 97

TL-130100-1001
STEP
OPERATION
RESULT3If park is successful,(a) Confirmation tone.
(b) PARK LED on steady on parked-to
phone.
4Release by Flash or New Call.11II
5If park is unsuccessful,“REQUEST DENIED”
6Flash to return to original connection.PARK LED off.NOTE:
If parked-to station is a Featurephone and has a PARK LED, that LED will be on to
indicate that a call is parked to that station number.
Call Park RetrieveSTEPOPERATION
RESULT
1
2
3
5210Begin from an idle, off-hook, receiving dial tone state....

Page 98

TL-130100-1001NOTE:When multiple calls are parked to a single number, they will be handled on an FIFO
basis.
3.7.11
Call Pickup “PICKUP” (28, 29)Call Pickup allows the user to answer another ringing station within a work
group (Group Pickup) or from a larger expanded group (Extended Group
Pickup). Both types provide for directed pickup so that the desired ringing
station may be specified.
Group/Directed Call Pickup (28)
STEPOPERATIONRESULT
Begin from detection of a phone ringing within the pickup group....

Page 99

TL-130100-1001Extended Group/Directed Call Pickup (29)Same as Group/Directed Call Pickup except depress GRP PICKUP.
See also:Inside Call Source Display, Table 3.5.
Outside Call Source Display, Table 3.6.
3.7.12Call Waiting “WAIT” (30)Call Waiting permits an instrument user to cause incoming calls of certain
types to wait for answering when the desired called line is busy with another
call. To the calling line, it will appear as if the called line is idle. The called
instrument provides special audible...

Page 100

 rTL-130100-1001STEPOPERATIONRESULT
3Successive operations of CALL
WAIT button swaps back and forth
between calls.Call source shows that the current call is
waiting.
4When finished with a call, go
on-hook.If only one call is waiting:
(a) CALL WAIT LED off.
(b) Distinctive ringing indicates call still
waiting.
(c) Call source 
“C# = XXXX NORMAL” if
two calls waiting, as in Step 1 above.
NOTE:
If the remote end of the active call disconnects, the user must depress CALL WAIT
to be connected to the other...
Start reading GTE Omni Si Database Technical Practices Issue 1 Manual

Related Manuals for GTE Omni Si Database Technical Practices Issue 1 Manual

All GTE manuals