GTE Omni Si Database Technical Practices Issue 1 Manual

TL-130100-1001NOTES:
1.If, at any point in programming a feature, no action is taken for 60 seconds, a triple
beep will be heard, the LED will go dark, and the display will revert to whatever was
displayed prior to the beginning of programming. All attributes that were assigned to
that button up to that point will be disregarded.
2.If error beep is heard when entering a function code, it may be because that feature
button is already programmed, or the entry attempted is invalid for that instrument
(such...

TL-130100-1001
FLASH - used in storing a feature access code (such as in the dual access
and repertory dialing features). To enter a Flash:
STEPOPERATIONRESULT
1Depress and hold *.
2Release *.
Beep heard.BLANK 
- used to space out characters on the display. To enter a Blank:
STEPOPERATIONRESULT
1Depress and hold 0.
2Release 0.Beep heard.ALPHA 
- Alpha entries may be made in the first field of station speed calling
and reminder features. Alpha entries are made using the alphabetic
designations on the...

5210TL-130100-1001i-0 ENTER ROD:
1.DEPRESS R KEY (7 KEY).
2.DEPRESS 0 TO INDICATE THAT R
IS THE CENTER LETTERON THE 7
KEY.
3.DEPRESS 0 (6 KEY).
4.DEPRESS # TO INDICATE THAT 0I/“,” pq II,:,/jIS THE RIGHTMOST 
LETTERONTHE 6 KEY.
5.DEPRESS D (3 KEY).
6.DEPRESS l TO INDICATE THAT
D IS THE LEFTMOST LETTER
ON THE 3 KEY.
NOTE:
A beepwill be heard
after each entry.
Figure 3.2 Entering Alpha Information in Integrated FeaturephoneNEXT FIELD REQUEST 
- Station Speed Calling, Reminder, Duration Alarm,
Message...

- -TL-130100-1001
Table 3.11 List Types
LIST TYPE
NUMBER OF ITEMSCODE NUMBERSFunction Code
Reminder
Speed Call
48Items00 47through
(except 11 and 12)
8Items1 through 8
20Items10 29through
After a list has been requested and items are displayed, you may dial 
# to see
the next field of a particular item (such as the phone number associated with
a Reminder item). Depress 
* again to see the next item in the list.
3.6Alphabetic Featurephone Button ProgrammingSome feature buttons require additional...

TL-130100-1001Table 3.12 Features Not Requiring Additional Programming
FUNCTION
CODEFUNCTIONCODE
Account Code
Automatic Callback
Bad Line
Busy Override
Call Announcing
Call Hold
Call Park
Call Waiting
Conference
Data Protection
Dial Display
Dual Access
Executive Priority Call
Extended Call Pickup
Extended Group Select
Flash40
3745
34
26
21
32
30
38
33
16
10
35
29
12
03
Forced Busy36Group/Directed Call Pickup 28
Intercom
22
Last Number Redial06
Message Leaving25
Monitor04
New Call05
Privacy Release46...

 r- -TL-130100-1001
3.6.2Automatic Intercom (23)
STEPOPERATIONRESULT
1Depress and hold AUTO ICOM.
2Release.
3
4
Enter desired number.
Depress #.
If valid,
If invalid,
5
6Another number may be tried.
To store, depress and hold
“AUTO 
ICOM” .
7Release.(a) AUTO 
ICOM LED on.
(b) Beep heard.(c) “AUTO INTERCOM”
(a) AUTO 
ICOM LED flashes.
(b) “NUMBER = 
---‘I
“DN= 
XXXK’
“VALIDATING DN”“STORE ENTRY”
(a) Three beeps heard.(b) “NUMBER = XXXX”
(a) AUTO 
ICOM LED on steady
(b) Beep heard.(c) “NEW ENTRY STORED”...

TL-130100-1001
STEPOPERATION
RESULT3= Forward on busy and no answer
4=Forward all calls.
4Depress # to change fields.
5Enter 3- or 4-digit number to which
calls will be forwarded.
6To store, depress and hold
FORWARD.
7Release.“NUMBER = 
-‘I(a) “NUMBER = 4321”
(b) “VALIDATING DN”, then “STORE
ENTRY”
(a) Beep heard.
(b) “NEW ENTRY STORED”
(a) FWD LED off.
(b) Display clears or reverts to time and
date.
3.6.4Direct Station Selection (DSS) (11)
STEPOPERATIONRESULT
1Depress and hold DSS.
2Release.
3
4Enter...

-TL-130100-1001
STEPOPERATIONRESULT
7Enter group type (see note 3).“XXXX 4 3”
1= Full DSS
2= Alternate DSS
3= Call Only DSS
8To store, depress and hold DSS.(a) DSS LED on steady.
(b) Beep heard.
(c) “NEW ENTRY STORED”
9Release.(a) DSS LED off.
(b) Display clears or reverts to time and
date.
NOTES:
1.If the number is invalid, the display shows: XXXX R G with the cursor under the
number field and three error beeps sound. You can then re-enter the directory
number.
2.This display indicates the following:...

TL-130100-1001
STEPOPERATION
RESULT3
4
5
6
7
8NOTE:Enter desired access code.To store, depress and hold DUAL
ACCESS.
II1= X XXXXXXX” (phone number)
(a) DUAL ACCESS LED on steady.
(b) Double beep heard.(c) “NEXT ENTRY”
Release.(a) DUAL ACCESS LED flashes.
(b) “2 = “*
Enter desired numberTo store, depress and hold DUAL
ACCESS.
“2 =X XXXXXXX” (phone number)
(a) DUAL ACCESS LED on steady.
(b) Beep heard.(c) “NEW ENTRY STORED”
Release.(a) DUAL ACCESS LED off.(b) Display clears or reverts to time and
date.If...

-.TL-130100-1001
STEPOPERATIONRESULT
7Release.(a) LINE LED off.
(b) Display clears or reverts to the time
and date.
NOTES:
1.This display indicates the following: XXXX is the directory number currently assigned
- it is blank if there is none, and R is the alerting type.
2.If the number is invalid, the display shows: XXXX R G with the cursor under the
number field and three error beeps sound. Another directory number can then be
entered.
3.If the type of ALERTING (l-4) is invalid, an error tone will be...