GTE Omni Si Database Technical Practices Issue 1 Manual

TL-130100-1001
STEPOPERATIONRESULT1Terminate conversation on receiving
a camp-on tone and place station
on-hook.Station will ring.
2Inform caller of a call waiting andCalling party placed on hold.
intent to place on hold upon receiving
a camp-on line and flash hookswitch.
3Transfer the camp-on caller to
another station if desired.
4Return to caller on hold by dialing
call-waiting answer code.Calling party is reconnected.
NOTE:It is possible to transfer the camped-on party to some other station before...

TL-130100-10014.If a system is engineered for Call Waiting, Toggling, station
users having one or more waiting calls will not be able to
consult, transfer or establish three-way connections with
other parties. Only toggling between the present call and the
waiting call is allowed.
5.Call Waiting, Toggling via flash is not to be available to
integrated featurephone users.
6.Unlike the Call Waiting feature available in the public
telephone network, Call Waiting, Toggling cannot bedisabled by dialing an...

TL-130100-1001NOTES:
1.Break-in can only be established on station-to-station or 
station-to-trunk calls. It cannot occur when a station is in ringing, dialing, consulting,
or transferring mode, or when a call having data line security is marked on
either party’s station.
2.Executive Override is not enabled to a station that has terminating call
waiting.
2.2.15Station Camp-On, Callback, and CancelStation Camp-On allows the user with a properly classmarked station either
to camp on to one station or to...

 rTL-130100-1001
STEP6OPERATION
Cancel call in four seconds by
placing station on-hook.RESULT
WCancel Station Camp-On with Callback
STEPOPERATION
RESULT
1Dial cancel camp-on with callback
code.Cancellation of camp-on indicated by slow
busy tone (60 IPM).
2Go on-hook.
22.16
Dial Call Pickup
Dial Call Pickup allows a station user in a dial call pickup group to be
connected to a station in the ringing mode within the same pickup group by
dialing a special access code. Each pickup group has stations...

TL-130100-I 001
STEPOPERATIONRESULT1Go off-hook.Dial tone heard.
2Dial directed call pickup access
code.
3Dial number of ringing station.The call is diverted to station dialing the
access code, and call can be answered.
2.2.18
Extended Dial Call Pickup
Extended Dial Call Pickup allows selected stations to pick up calls of more
than one group by being associated with one of 30 extended pickup tables.
Any number of stations can be associated with an extended pickup table.
Each extended pickup table...

-TL-130100-1001
2.2.19IVMS Direct Access
STEPOPERATIONRESULT
1Take station off-hook.
Dial tone heard.
2Dial IVMS directory number.
A recorded message or busy tone is heard.
3Follow spoken, English language
commands given by 
IVMS toAs specified by the 
IVMS User’s Guide.
manipulate your personal mailbox.
2.2.20
Call ForwardingCall Forwarding allows incoming calls to a station to be automatically
forwarded to an alternate station, attendant, a recorded announcement, or
hunt group pilot number. Calls can...

TL-130100-1001(9)Call forwarding cannot be used to change both the forwardcondition and the destination if the destination is a recorded
announcement.
Call Forwarding features are as follows:
(4Variable Call ForwardingVariable Call Forwarding allows the user to forward incoming calls
automatically to the attendant, to another station, or to the pilot number of a
hunt group.
STEPOPERATIONRESULT
1
2
Go off-hook.
Dial variable call-forwarding access
code.
3Dial appropriate new condition code.
New condition...

TL-130100-1001
STEPOPERATIONRESULT3Dial new condition code 0 (forward
no calls).(a) Canceled if slow busy heard.
(b) Not canceled if fast busy heard.
4
Go on-hook.
(clFixed Call ForwardingFixed Call Forwarding allows station users to change the conditions under
which calls are to be forwarded, but not the destination.
STEP
OPERATIONRESULT
1Go off-hook.Dial tone heard.
2Dial fixed call-forwarding access
code.
3Dial appropriate new condition code.If call forwarding successful, station
receives slow busy...

TL-130100-1001STEPOPERATIONRESULT
3Dial new condition code 0 (forward
no calls).
4Go on-hook.(a) Canceled if slow busy heard.
(b) Not canceled if fast busy
heard.
2.2.21
Conferences
(a)Attendant/Station ConferenceThe station user, with attendant assistance, may establish up to seven
conference connections (a total of eight including the attendant) on each of
the two conference bridges.
STEPOPERATIONRESULT
1Go off-hook.Dial tone heard.
2Dial attendant access code.Ringback tone heard.
3When attendant...

TL-130100-1001STEPOPERATIONRESULT3
Other stations performing Steps 1 and
2 will meet in the conference bridge.
(clStation Controlled Progressive Conference
Station Controlled Progressive Conference allows the addition of non-preselected stations, as well as trunks, to a station-initiated conference. The
system has two conference bridges which are used for the attendant and
meet-me conference. The maximum capacity of a conference bridge is
seven, stations or trunks, plus one attendant. The conference...