GTE Omni Si Database Technical Practices Issue 1 Manual

TL-130100-1001NOTE:When the station has a conference circuit in the progressive mode, the conference
circuit is made busy to any other station. The station that initiates the conference
can call the attendant without disconnecting from the conference circuit.
2.2.22Speed Calling and Update
(a)lndividual Speed Callinglndividual Speed Calling allows the station user to have a unique set of up to
eight speed-calling entries programmed into an individual speed-calling list
in the system data base. This...

STEPOPERATIONRESULT4If the list entry is to be deleted, dial
a 
# and procedure is complete;
otherwise, go to Step 5.
5Dial speed-calling information which
can consist of 1 to 15 digits.
NOTE:
If a pause or a special character entry is required, dial an *, then dial a 1 for a short
pause or a 2 for a long pause (durations determined in the data base) or the 
* or #
character, then continue dialing digits 0 through 9.
6Dial # to indicate procedure is
complete.
7Go on-hook.Dial tone stops.
Confirmation...

TL-130100-1001WGroup Speed-Calling Update
This update allows a station user to add, delete, or change numbers that are
stored in the group speed-calling list.
STEPOPERATIONRESULT
1
2Go off-hook.
Dial appropriate code for updating
the group speed-calling data.
3Dial group speed-calling list entry
number to be modified (000-999).Dial tone heard.
Dial tone stops.
Dial tone heard again, indicating that
system is prepared to accept group
speed-calling data.
If group speed-calling list entry is to
be deleted,...

TL-130100-1001
STEPOPERATIONRESULT
Dial dictation-access code.
Dial code to start the dictation
machine, then dictate.
Dial code to stop dictation machine.
Dial code to rewind tape a short
distance.6Dial code to play back recording.
7Dial code to release dictation
equipment.
aGo on-hook.Ready tone heard.
Dictation machine begins recording.
Dictation machine stops.
Dictation machine rewinds a short
distance.
Dictation machine rewinds and plays back
recording.
Dictation machine released.
2.2.24Paging...

TL-130100-1001STEPOPERATIONRESULT
1Take station off-hook.Dial tone heard.
2Dial code-calling access code.
3Dial zone digit (data base option).
4Dial code number of desired party.Tones are transmitted over paging
equipment.
5Keep station off-hook until called
party answers using code
call-answer access code.
2.2.26Universal Night Answer (UNA) and Predetermined Night Answer
W’JA)Calls to zones designated UNA are handled by the station user as follows
(see note for PNA).
STEPOPERATIONRESULT
1An audible or...

TL-130100-1001STEPOPERATIONRESULT
1From an outside touch-calling
telephone, dial number assigned to
remote access feature.One of the following occurs:
(a) If an authorization code is
required, distinctive dial
tone is returned to the station.
(b) If an authorization code is not
required, regular dial tone is
returned to station,
indicating access is allowed
to system services.
2If required, dial authorization code.Regular dial tone returned to station,
indicating access allowed to system
services.
3Dial...

TL-130100-1001(b)Cancellation of Timed Reminder
STEPOPERATIONRESULT
1Go off-hook.
Dial tone heard.
2Dial timed-reminder cancel code.
(a) If successful, confirmation tone heard.
(b) If unsuccessful, reorder tone heard.
3Go on-hook.
NOTE:From’an administrative telephone position, the operator will have to dial the station
number after the access code or the cancel access code. An administrative
telephone position occurs when a station, such as a dial call pick-up unit, functions
in an attendant mode....

TL-130100-1001STEPOPERATIONRESULT
4
Go on-hook.
2.2.30Secretarial Services (Screening)Screening allows a station functioning in a secretarial mode or display set to
override a station in the forward or divert all calls condition and return the call
to that station (if the originally called station is not off-hook). For different call
types, the display telephone set exhibits the following:
(a)Originally called number for station diverted to station calls
(b)Calling number for station to station calls...

-TL-130100-1001
2.2.32Specialized Common Carrier (SCC)
SCCs may require more than 30 digits to be entered in order to establish a
long distance connection. A user must first access the correct trunk group
(l-3 digits), dial the SCC directory number (7-10 digits), dial the SCCauthorization code (l-10 digits), and finally dial the desired DDD number (7-
11 digits).The SCC access feature performs segments of this sequence with a
minimum number of digit entries. Data base programming provides five SCC
access...

TL-130100-1001STEPOPERATION
RESULT2. Bypass toll access checks
3. Bypass both checks4. Bypass no checks
(b) Correct trunk group is accessed.
(c) SCC directory number is automatically
dialed.
(d) SCC equipment dial tone heard.
2Dial an “*“.Required SCC authorization code
automatically dialed.
3Dial DDD number or dial an “*” andRingback heard.appropriate speed-calling list access
code and list number (individual or
group speed).
2.2.33Change/Restore
This feature allows PABX station users to change the...