GTE Omni Si Database Technical Practices Issue 1 Manual

TL-130100-1001(c)Call forwarding within a hunt group is valid only if the
Featurephone is the last member of a terminal hunt group without
camp-on.
(4Meet-Me ConferenceThe Meet-Me Conference feature enables station users to establish or enter
a conference call by dialing a special access code. Trunk parties may be
added to the conference by the attendant.
STEPOPERATIONRESULT
1Inform the conferees of the access
code, bridge digit, and time of
conference.
2At the designated time go off-hook
and enter...

TL-130100-1001(!aUniversal Night Answering
UNIVERSAL NIGHT ANSWER (UNA), when activated, allows users to answerattendant directed calls. When the attendant activates the feature, all calls
directed to the attendant or transferred to the attendant will cause audible
general alerting. The call may then be answered by any station.
I
STEPOPERATIONRESULT
1The attendant has activated UNA.Incoming calls will cause general audible
alerting.
2To answer an incoming call.(a) Dial tone heard.(a) Go off-hook.
(b)...

TL-130100-100103Barge InOn multi-set lines, each set has automatic privacy during calls which have
been initiated or answered on that set. However, the control appearance of
the line may Barge In by going off-hook when the line is busy on a different
set. The control appearance will then be automatically placed in a 
three-way connection with the call previously established on the non-control
appearance of the same line.
STEPOPERATIONRESULT
1Begin with a multi-set line busy on a non-control appearance,...

TL-130100-10013.7.36Reminder “REMIND” (13)REMINDER permits the user to receive an audible and visual alarm at a
previously scheduled time. The alarm may be scheduled on a daily, weekly,
or calendar event basis. In addition to the alarm, the user may choose to
have a preprogrammed reminder message to accompany the alarm. A
reminder message consists of three components:
- alphanumeric text
- time and date of the reminder
- digit pattern to be dialedThe user may program up to eight reminder messages....

TL-130100-1001STEPOPERATIONRESULT
1
2
3
8
1
2
3
5210
Weekly ReminderEnter two-digit number to set
hour.Depress 
# to change fields.
Enter two-digit number to set
minutes.
Depress #.
Enter 1 (AM) or 2 (PM).
Depress #.
Enter day as follows:
1= Sunday
2= Monday
3= Tuesday
4=Wednesday
5= Thursday
6= Friday
7= Saturday
Depress 
#.
Event ReminderEnter two-digit number to set
hour.Depress # to change fields.
Enter two-digit number to set
minutes.
Depress 
#.Enter 1 (AM) or 2 (PM).
Depress 
#.Enter month, 
#,...

TL-130100-1001
NOTES:1.If an alarm or reminder is not retired by the user within 8 hours of having matured, it
will automatically be retired by the instrument.
2.If another alarm/reminder comes due while one is currently active, it will be placed in
queue until the current alarm/reminder is retired, at which time the queued
alarm/reminder is activated. The queue shall allow a total of eight alarms or
reminders to be queued and processed on a first-in, first-out basis.
3.7.37
Remote Tone “TONES” (44)...

TL-130100-1001
STEPOPERATIONRESULT
(d) LAST # LED off.
(e) Display clears or reverts to the time
and date.2Continue as with a normal line-to-line
call.
NOTE:
If the user depresses the LAST # feature button with the instrument on-hook, the
instrument shall initiate automatic line seizure followed by on-hook dialing. Refer to
LINE SEIZURE for more information.
3.7.39Repertory Dial “REP DIAL” (09)
Repertory Dial provides for sending a programmed repertory number to the
switch. The associated 
LEDs are on...

 rTL-130100-1001
3.7.40
Ringer Cutoff “‘NO RING” (01)
NO RING allows the station ringer to be silenced for the current call or for all
future calls. If the NO RING button is depressed while the phone is ringing,
the ring is silenced only for that call.If the phone is silent when the NO RING
button is depressed, all future calls are silenced. Incoming calls are then
signaled by a winking LED and may be answered in the normal manner.
STEP
OPERATIONRESULT1To deactivate the station ringer,(a) RINGER CUTOFF...

TL-130100-10013.If code number entered has no number stored, display shows “HANG UP and
REDIAL”.3.7.42
System Speed Calling “SYS CL” (47)
SYSTEM SPEED CALLING allows the user to access system group speed
calling numbers by use of SYS CL button and a code number to identify any
one of the 1000 numbers.
STEP
OPERATION
RESULT
Begin in an off-hook dialing mode. BUSY and I-USE 
LEDs on, dial tone heard,
“PLEASE DIAL” displayed.
1Depress SYS CL button.(a) SYS CL LED flashes at 120 IPM.
(b) “CODE =
”
2Enter,...

TL-130100-1001
STEPOPERATION
RESULT2To call a saved number, depress
SAVE #.(a) Number dialed appears.
(b) Number is automatically dialed.
(a)Saved Number Redial - To Store Number
STEP
OPERATIONRESULT
1Depress and hold SAVE NO.(a) SAVE NO. LED on.
(b) Beep heard.
(c) “SAVE # 
REDIAL”
2Release.(a) SAVE # LED flashes.
(b) “XXXX” or blank if no number saved.
3Enter desired number.“XXX--” as entered.
4Depress and hold SAVE NO.(a) SAVE NO. LED on steady
(b) Beep heard.
(c) “NEW ENTRY STORED”
5Release.(a) SAVE...