GTE Omni Si Database Technical Practices Issue 1 Manual

:_ iTL-130100-1001 i1
STEPOPERATIONRESULT(b) If Attendant Console is in NIGHT
ANSWER mode, NIGHT ANSWER 1
(or 2) appears on the display and
the 
NITE ANSW LED is on.
:
;--
2Depress NITE ANSW pushbutton.STAFFED LED on and
ANSW LED off.display
3If service is not restored, turn power
switch off, then back on.INITIALIZATION LED flutters, and after ashort time goes off, NIGHT ANSWER 1
appears on the display and ALARM LED
flashes.
4Depress NITE ANSW pushbutton.STAFFED LED on and display and NITE
ANSW LED off....

TL-130100-1001
STEPOPERATION
RESULT
(f) Ringing stops.
(g) Attendant and called party connected.
(h) (Message Waiting option) MSG WTG
pushbutton LED flashes at 60 IPM and
“MSG WAITING” displayed if station
has message-waiting feature activated.3Answer calling party and provide
assistance.
4Depress POS RLSE pushbutton to
release call.(a) LOOP LED off.
(b) START/STOP LED off.
(c) POS RLSE off.
(d) EXCL SRCE or EXCL DEST LED off if
(e) 
Fked display cleared
(f) Trunk and station identification
cleared from...

.  .:..- -TL-130100-1001
NOTE:In case of a misdial for any call, station, or trunk, depress DEST RLS pushbutton,
then depress START/STOP pushbutton. Listen for dial tone and enter correct
number. Dial tone is not applied after DEST RLS.
4.8Placing Call on Hold
4.8.1Place Station Call on Hold
STEP
OPERATIONRESULT
1Ask the calling party to wait and
depress the HOLD pushbutton.(a) LOOP pushbutton LED winks slowly
at 30 IPM.
(b) TOD displayed.NOTE:
On call hold time out, attendant recalled and LOOP wink...

TL-130100-1001STEPOPERATIONRESULT(g) Class-of-service digits cleared if
present.
(h) TOD displayed.
4.8.3Trunk Calls and Automatic Recall
STEPOPERATION
1Incoming CO trunk call received by
Attendant Console.
2Depress flashing LOOP LED
pushbutton (l-4).
3Depress HOLD pushbutton.
4Depress winking loop pushbutton
before time out occurs.
5Depress HOLD pushbutton.
6Allow time out to occur.
7Depress flashing LED LOOP
pushbutton.
O-160
8187(a) Ringing heard.
(b) LOOP LED (l-4) flashes at 120 IPM.
(a) LOOP LED...

.TL-130100-1001
STEPOPERATIONRESULT
8Depress POS RLSE pushbutton.(a) LOOP LED off.
(b) POS RLSE LED off.
(c) START/STOP LED off.
(cl) EXCL SRCE or EXCL DEST LED off if
(e) 
Fzed display cleared.
(f) Trunk and station identification
cleared from variable display.
(g) TOD displayed.
4.9Extending a Call
4.9.1Extension of Trunk-to-Trunk Calls
STEPOPERATIONRESULT
2
3Dial trunk group access code.
4
5
1Incoming CO trunk call having
disconnect supervision received by
Attendant Console.(a) Ringing heard.
(b) LOOP...

TL-130100-1001STEPOPERATIONRESULT
6Depress POS RLSE pushbutton,
(a) POS RLSE LED off.
(b) START/STOP LED off.
(c) LOOP LED off.
(d) Transmission established between
trunks.
4.9.2
Extension of Information Calls (Option 1)
STEPOPERATIONRESULT
1Initiate station-to-attendant call.
(a) Station hears ringback tone.
(b) Ringing heard.
(c) LOOP LED flashes at 30 
IPM.
2Depress flashing LED LOOP
pushbutton (1-4).(a) Ringback tone stops at station.
(b) Ringing stops.
(c) LOOP LED on.
(d) START/STOP LED on.
(e) POS...

TL-130100-1001
4.9.3Extension of Information Calls (Option 2)
STEPOPERATIONRESULT
1Station-to-attendant call initiated.(a) Station hears ringback tone.
(b) Ringing heard.
(c) LOOP LED (l-4) flashes at 30 IPM.
2Depress flashing LED LOOP(a) Ringback tone stops.
pushbutton (1-4).(b) Ringing stops.
(c) LOOP LED on.
(d) START/STOP LED on.
(e) POS RLSE LED on.
(f) Originating station number and
classes of service displayed.
(g) “INFORMATION” appears in fixed
display field.
(h) Transmission established between...

TL-130100-10014.10Announcing Call to Station
4.10.1Excluding Calling Party When Extending Call
STEPOPERATIONRESULT
1Incoming call received by Attendant(a) Ringing heard.
Console.(b) LOOP LED (l-4) flashes.
2Depress LOOP pushbutton
associated with flashing LOOP LED.(a) LOOP LED on.
(b) Source appears in display.
(c) POS RLSE LED on.
(d) START/STOP LED on.
(e) Ringing stops.
(f) Transmission established between
3Dial station number.
4Remain with call until station
answers, and announce call.
5Depress POS...

TL-130100-1001STEPOPERATIONRESULT
3Dial station number
4
5
6(e) Ringing stops.
(f) Transmission established between
trunk and Attendant Console.
(a) EXCL SRCE LED on.
(b) Fixed display cleared.
(c) Calling party placed on hold in 
exclude-source state.
(d) 
Ringback tone heard.
(e) Dialed digits appear on fixed display.
(f) START/STOP LED off.
Remain with call until station
answers, and announce call.
Depress EXCL SRCE pushbutton.Conversation private (two-way calling
party excluded).
(a) EXCL SRCE LED...

‘.TL-130100-1001
STEPOPERATIONRESULT
3Dial station number.
4Remain with the call until the station
answers and announce the call.
5Depress EXCL DEST pushbutton.
6Depress EXCL SRCE pushbutton.
NOTE:
Alternate exclusion of calling party or called party can be continued by performing
Steps 5 and 6 above. If three-way conversation is desired, perform Step 7
operation, otherwise, go to Step 8.
7Depress either the EXCL SRCE or
EXCL DEST pushbutton that has its
associated LED on.
NOTE:
Either Step 5 or 6...