GTE Omni Si Database Technical Practices Issue 1 Manual

TL-130100-1001OPERATIONRESULT(e) Trunk andstation numbers cleared from
variable display.(f) Class-of-service digits cleared if
present.
(g) TOD displayed.
4.17Extending Information Call on Outside Number, WATS Line, or
FX Line
4.17.1
Attendant Completes Call
STEPOPERATIONRESULT
1Station user requests outside number.
2Dial appropriate access code.(a) EXCL SRCE LED on.
(b) Fixed display cleared.(c) Second dial and tick tone heard.
(d) Dialed digits appear on fixed display.
3Dial outside number.(a) Ringback...

TL-130100-10014.17.2
Station User Completes Call
STEPOPERATIONRESULT
1Station user requests assistance to
reach outside number.(a) Acknowledge request.(b) inform station user that outside number
can be dialed from station upon hearing
outside dial tone.
NOTES:
1.If the attendant extended the station to the trunk, the station’s class of service is used
for toll restriction.
2.If the attendant wants to bypass toll restriction, the entire number must be dialed
before extending the trunk to the station....

TL-130100-1001STEPOPERATIONRESULT
4When tie-line party answers, announce
call.
NOTE:Disconnect when ringback tone heard.
5Depress lighted EXCL SRCE LED
pushbutton. .EXCL SRCE LED off.
6Depress POS RLSE pushbutton to(a) Fixed display cleared.
release from call.(b) LOOP and POS RLSE 
LEDs off.
(c) TOD displayed.
(d) Station and the Tie Line party are talking.
4.19
Attendant Conference
4.19.1Establish Conference Call for Inside Party
STEPOPERATIONRESULT1
2
3
4
NOTE:
5
6
5210Obtain all names and station...

TL-130100-1001STEPOPERATIONRESULT
7
8
9NOTE:
10
11Depress CONF pushbutton.(a) CONF LED flashes.
(b) EXCL SRCE LED on.
(c) Beak-in tone heard by conferee.
(d) Attendant placed in conference.
Depress EXCL SRCE pushbutton.(a) The EXCL SRCE LED off.
(b) Called party placed in conference.
Depress flashing CONF LED(a) CONF LED on.
pushbutton.(b) Attendant removed from conference.
Trunks that do not guarantee disconnect supervision remain in conference bridge
until last station hangs up regardless of when trunk...

TL-130100-10014.20.3Placing Call in Page Queue
STEPOPERATIONRESULTIncoming trunk call placed to
Attendant Console.
Depress flashing LED LOOP
pushbutton.
Depress PAGE 
Q pushbutton.
Depress POS RLSE pushbutton.
Depress and hold the PAGE push-
button and page the desired party.
Release PAGE pushbutton.
Dial page queue access code from
any station.
Dial attendant from any station as
an alternative to Step 7.
Depress flashing LOOP LED
pushbutton.(a) Ringing heard.
(b) LOOP LED (l-4) flashes at 120 IPM.
(a)...

--
TL-130100-1001STEP
OPERATlONRESULT
10Depress PAGE Q pushbutton.(a) The PAGE Q LED off.
(b) Three-way conversation established
,between attendant, trunk, and station.
11Depress POS RLSE pushbutton.(a) The LOOP LED off.
(b) POS RLSE LED off.
(c) EXCL SRCE or EXCL DEST LED off if
(d) 
Fked display cleared.
(e) Trunk and station identification cleared
from variable display.
(f) Class-of-service digits cleared if
present.
(g) TOD displayed.
(h) Trunk and station are connected.
42Dial attendant from any...

TL-130100-1001
4.20.5If Paged Party Calls Attendant
STEPOPERATIONRESULT
1
2
3
NOTE:Depress flashing LED LOOP
pushbutton.(a) LOOP LED on.
(b) START/STOP LED on.
(c) POS RLSE LED on.
(d) Station number displayed in 
trunk-and-station-number display.
(e) The class-of-service digits displayed
in class-of-service display.
(f) “INFORMATION” displayed in 
type-of-call display.
After answering paged party, depress(a) PAGE Q LED off.
PAGE Q pushbutton.
(b) Three-way call established.
To release call, depress POS...

.’.T I.
TL-I 3OlOO-1001
STEPOPERATIONRESULT
3Depress PAGE Q pushbutton.
4
5Depress START/STOP pushbutton.
Incoming trunk call placed to an
attendant that does not have PAGE
Q equipped.
6Depress flashing LED LOOP
pushbutton.
7Depress PAGE Q pushbutton.(a) PAGE Q access denied.
(b) Appropriate message displayed
indicating failure.
START/STOP LED off.
(a) Ringing heard.
(b) LOOP LED (l-4) flashes at 120 IPM.
(a) LOOP LED on.
(b) “LOCAL” appears in fixed display field.
(c) Trunk number appears in variable...

TL-130100-10014.19.3
Station on Outside Party Requests Inclusion in Existing
Conference
STEPOPERATIONRESULT
1If calling party requests entry in
existing conference, depress the
lighted CONF LED pushbutton.
2Depress EXCL. SRCE LED pushbutton
if conferees are allowed entry.
3Depress flashing CONF LED
pushbutton.
4
Depress POS RLSE pushbutton to
release loop.
5Depress flashing CONF LED
pushbutton if conferees are denied
entry.
6Depress EXCL SRCE pushbutton.
7Inform calling party of reason for
entry denial....

TL-I 30100-l 001
OPERATIONRESULTDial conference bridge 2 access
code.
(a) Fixed display cleared.(b) If conference bridge 2 is idle, CONF LED
(c) 
i:onference bridge 2 is busy, CONF
LED remains on.
(d) Dialed digits appear on fixed display.
4.20
4.20.1
Paging
Universal Paging
OPERATION
RESULT
1Depress and hold PAGE pushbutton
for duration of page or message.(a) PAGE LED on.
(b) Message or page heard over
loudspeakers.
2Release PAGE pushbutton.(a) PAGE LED off.
(b) Attendant disconnected from paging...