GTE Omni Si Database Technical Practices Issue 1 Manual

: : ‘. :--TL-130100-1001
6.3.3
Set Options CommandThe MDR accesses the SET OPTIONS command via the system
maintenance terminal. It uses a set of data base variables called screening
options to determine which trunk calls are to be recorded. This set of
variables consists of the following:
(a)Call duration
lb)
(c)Work group number
Outgojng trunk group number
(d)Incoming trunk group number
The set options command is used to change the selection of trunk calls to be
recorded by the MDR. When set via the...

TL-130100-1001
The MDR will request the user to select up to eight work groups at one time
as follows: WORK GROUP #S O-7. The user may then enter any number(s)
from 0 through 7 in any order followed by a period. Once this is done, the
MDR requests the user to select the next set of eight work group numbers as
follows: WORK GROUP 
#S 8-15. Again, the user enters the desired work
group numbers within the indicated bounds. If the user does not wish to
select any of the work groups within any given...

Set MDR Options.
Remote Polling Device:Call Duration (O-255 
set) ?
Work Group 
#S 0 - 7 ?
Work Group 
#S 8 - 15 ?
Work Group 
#S 16 - 23 ?
Work Group #S 24 - 31 ?
Work Group 
#S 32 - 39 ?
Work Group 
#S 40 - 47 ?
Work Group 
#S 48 - 55 ?
Work Group 
#S 56 - 63 ?
Outgoing Trk Grp 
#S 0 - 7 ?
Outgoing Trk Grp 
#S 8 - 15 ?
Outgoing Trk Grp 
#S 16 - 23 ?
Outgoing Trk Grp 
#S 24 - 31 ?200
0
8
16
24
3240
48
56
0
10
16
243
9
17
25
33
4149
57
2
12.
19
26.7
10
18
26
3442
50
58
4
23.2
11
19
27
3543
51
59
64
12...

TL-130100-1001Set MDW Options.
Remote Polling Device:Call Duration (O-255 
set) ?
Work Group 
#S 0 - 7 ?
Work Group 
#S 8 - 15 ?
Work Group 
#S 16 - 23 ?
Work Group 
#S 24 - 31 ?
Work Group 
#S 32 - 39 ?
Work Group 
#S 40 - 47 ?
Work Group 
#S 48 - 55 ?
Work Group 
#S 56 - 63 ?
Outgoing Trk Grp 
#S 0 - 7 ?
Outgoing Trk Grp 
#S 8 - 15 ?
Outgoing Trk Grp 
#S 16 - 23 ?
Outgoing Trk Grp #S 24 
- 31 ?
Incoming Trk Grp #S 0 
- 7 ?
Incoming Trk Grp #S 8 -15 ?
Incoming Trk Grp #S 16 
- 23 ?
Incoming Trk Grp #S...

TL-130100-1001(clThe call must exist in two-way conversation for an interval of time
greater than or equal to that specified as the minimum call
duration for the given port. In the absence of answer supervision
on outgoing trunks, calls are presumed to enter two-way
conversation after the call answer time out interval in T446
Record Code OT.
1,
5210
6.3.4
Dump Options CommandThe DUMP OPTIONS command is used to display the current set of
screening options retained in the data base for either the terminal...

TL-130100-100163.5Output Formats - MDR Software Port 0The MDR software port 0 is an ASCII port which may be connected to a hard
copy terminal device, CRT, or outboard system that provides downstreamprocessing of the output from this port. Two types of records appear on port
0: call records and time change records. A call-record header is output
preceding the first call record and every sixty-fourth single-line call record
or thirty-second double-line call record thereafter. Every time-change
record also...

Office ID:
Originator
#
G 
rPCFFR
TO63 02
3
Office ID:
Originator
#
GrpCF
FR
A000
3
Office ID:
Originator
#
G r PCF
FR
TO63 02
3
Office ID:
Originator
#
GrpCF
FR
4201 00
3
5210TL-130100-1001
000000Date: 08-27-00Time: 10:14:08Terminator Called Number... Start
CallA M S Account
# Grp TypeTimeLength SR C Code
. . . . FRL . . . .
Auth Code5208 00861-5208
10:140o:oo
Incoming Trunk to Station
000000Date: 08-27-00Time: 
14:21:40Terminator Called Number... Start
CallA M S Account
# Grp TypeTimeLength SR C Code
....

 rTL-130100-1001
Office ID:
Originator
#GrPCF
FR
TO63 02
3
000000Date: 08-29-00Time: 09:03:04Terminator Called Number... StartCallA M S Account
# Grp TypeTimeLength SR C Code
. . . . FRL . . . .Auth Code
TO24 08 TIE 123-456-7890
08:070o:oo Y
Old Date
08/28/00Trunk to Trunk
Old TimeNew DateNew Time11:22:0902/28/0011:47:09Time Change
NOTES:
1.Abbreviations above are defined:
CF= Call Forward
FR =Facility Restriction Level
AS= Answer
2= MERS
= Speed Call
2.Line 2 is a data base programmable option.
Figure...

 rTL-130100-1001
Table 6.2 Port 0 Call-Record Format
COLUMN RANGEINTERPRETATION01-04Originator of Call...
-Line originators are identified by a 
4-digit DN, or a “C” in column 1,followed by three digits if 
3-digit numbering is used.
-Trunk originators are identified by a 
“T” in column 1, followed by a 3-digit
decima! trunk identity. The trunk identity may be decoded by dividing the
trunk number by 128. The quotient is the PEC number and will always be 0.
The value left in the dividend is the relative...

 r25-26Always blank-filled
27-46Called number...-This is a right-justified string of variable length, blank-filled on the left,
and containing dashes at appropriate points.-Dashes appear in columns 30, 34, 38, and 42 if the called number digit
string is longer than 4, 7, 10, and 13 digits, respectively. In other words,
leading dashes are replaced by blanks; only embedded dashes appear in
the output.
Examples:
co146
V
772-3372
3275
703-228-7131
01 l-21 6-762-4976
47-48
49-53
54-55
56-60TL-130100-1001...