GE Vivid 7 Service Manual

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 3 - System Setup 3 - 37
3-7-3-2 External Peripherals (Optional) The external printers are connected via Ethernet (TCP/IP network).
Color Printer, HP OfficeJet PRO K550
Installation instructions are available in the  Printer Driver Installation Manual for EchoPAC PC 
and Vivid 7 , Direction Number FC294837.
Color Laser Printer, HP  Color LaserJet 3600n
Please use the installation instructions  from HP, delivered with the...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
3 - 38 Section 3-7 - .  Configuration
3-7-3-2      External Pe ripherals (Optional) (cont’d)
Lexmark Color LaserWriter Network Printer.
These versions are available:
- 100 VAC: * Lexmark c762 Color Printer
* Lexmark c752 Color Printer (Going Obsolete)
* Lexmark c750 Colo r Printer (Obsolete)
- 110 VAC: * Lexmark c762 Color Printer
* Lexmark c752 Color Printer (Going Obsolete)
* Lexmark c750 Colo r Printer (Obsolete)
- 220 VAC: *...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 3 - System Setup 3 - 39
3-7-6 Software Options Configuration
3-7-6-1 Software Option Installation A Password (Software Option String) enables a softw are option or a combination of software options. 
This password is specific for each Vivid 7.
3-7-6-2 Install Software Option 1.) Press CONFIG
 (F2) and log on as  adm, see  4-2-4 Log On to the System as ‘ADM’ on page 4-12 .
2.) Select  ADMIN
 (lower part of window), 
3.)...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
3 - 40 Section 3-7 - .  Configuration
3-7-6-2      Install Software Option (cont’d) 5.) Type the Password (Software Option Key (Alphanumeric string)).
6.) Select OK to save the new setting.
7.) Close the Config window.
CAUTIONIncorrect password entry will resu lt in loss of system options. 
If password is incorrect, please contact your local GE Service representative or the Online 
Center. 

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 3 - System Setup 3 - 41
Section 3-8
Connectivity Overview
NOTE: If you are new or unfamiliar to co nnectivity on Vivid 7, you should read Section 5-15 
Connectivity Theory on page 5-148  before you continue with the next descriptions and 
procedures.
3-8-1 Physical Connection
3-8-1-1 Stand-alone Vivid 7
No network connection needed.
3-8-1-2 “Sneaker Net” Environment No network connection needed.
3-8-1-3 Connection from...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
3 - 42 Section 3-9 - Connectivity Setup - Software v7.x (BT’08), v6.x, v5.x and v4.x
Section 3-9
Connectivity Setup - Software  v7.x (BT’08), v6.x, v5.x and v4.x 
NOTE: If connected to a stand-alone network (P eer-to-Peer network with a Vivid 7 scanner, an 
EchoPAC PC workstation and an optional netw ork printer), you should use default delivery 
settings. 
3-9-1 Introduction
To be able to use the network functions when con nected...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 3 - System Setup 3 - 43
3-9-3 Compatibility
3-9-3-1 Vivid 7 with Software Version v7.x Vivid 7 with software version v7.x can communicate with:
• EchoPAC PC with software  version v7.x or newer.
• Image Vault 4.3 or newer.
3-9-3-2 Vivid 7 with Software Version v6.x Vivid 7 with software version v6.x can communicate with:
• EchoPAC PC with software version v6.x (use the  same, or newer software version as used on the 
Vivid...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
3 - 44 Section 3-9 - Connectivity Setup - Software v7.x (BT’08), v6.x, v5.x and v4.x
3-9-4 Select TCP/ IP Set-up Screen
1.) Press Config (F2 ) and log on as  adm, see  4-2-4 Log On to the System as ‘ADM’ on page 4-12 .
2.) If not already selected, select  Connectivity from the bottom row of “buttons” on the screen.
3.) Select the  TCP/IP TAB (it is named  Tcpip). The resulting screen gives  you an overview of many of 
the network...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
Chapter 3 - System Setup 3 - 45
3-9-5 Changing the Computer  Name, AE Title and/or Port Number (Port No.)
NOTE: To change the  AE Title and/or Port No. , please refer to:  3-9-5-3 Change AE Title and/or Port 
Number (Port No.) on page 3-47 .
3-9-5-1 Before you change the Computer Name Move all images to remote media before you change the Computer Name. See:  4-2-15 Space 
Management on page 4-20 , or refer to the User Manual, for a...

GE HEALTHCARE
DIRECTION FC091194, REVISION 11    VIVID 7 SERVICE MANUAL 
3 - 46 Section 3-9 - Connectivity Setup - Software v7.x (BT’08), v6.x, v5.x and v4.x
3-9-5-2      Change the Computer Name (cont’d) 3.) Edit the  Computer Name .
4.) Select  Save settings  to store your changes. This  will bring up a new Warning screen.
5.) Select  Ok to save your changes or  Cancel to return without saving any changes.
6.) Reboot Vivid 7 to activate the settings  or continue with other Tcpip set-up tasks.
Figure...