GE Logiq P5 Service Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION  1LOGIQ™ P5 SERVICE MANUAL 
Section 8-2 - DISASSEMBLY/RE-ASSEMBLY 8 - 25
8-2-6-4              Assembly procedure  (cont’d)
3.) Insert two of the flexible arm stoppers (A+B ) to the Power Cable and DVI cable in the Order 
illustrated on the figure be low. Make sure that chamfered shape of the flex ible Arm stopper should 
face inside.
4.) Insert oilless bush into the flexible arm neck pipe  and insert two cables into the flexible arm neck 
pipe.
5.) Insert the...

GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL  
8 - 26 Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
8-2-6-4              Assembly procedure  (cont’d)
6.) Screw 3 screws (2373562, FH M4X10 YEL) to fix the flexible arm stopper after adjusting the holes.
7.) Screw 1 screw (2159625, PH M4X8 W/SP) to install OP bracket.
8.) Screw 3 screws (5327646, HSH M6X16 WHT) to install the arm neck pipe. Make sure place DVI  cable be on the right side, power cable on the left side. Figure 8-43   Fixing...

GE HEALTHCARE
DIRECTION 5394141, REVISION  1LOGIQ™ P5 SERVICE MANUAL 
Section 8-2 - DISASSEMBLY/RE-ASSEMBLY 8 - 27
8-2-6-4              Assembly procedure  (cont’d)
9.) Screw 2 screws (5177684, HSH M5X20 WHT) to  assemble the LCD monitor with flexible arm Top 
part.
10.) Insert the two cables inside the Flexible arm and Screw 4 screws (2159625, PH M4X8 W/SP) to  assemble the Lower arm cable bracket.
11.) Put in the two cables. Make sure place DVI cabl e be on the right side, power cable on the left...

GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL  
8 - 28 Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
8-2-6-4              Assembly procedure  (cont’d)
12.) Screw 2 screws (2159626, PH M4X20) to assemble the Arm stopper.
13.) Screw 2 screws (2159625, PH M4X8 W/SP) to assemble the Lower arm guide bracket.
14.) Tie the Cables with Cable tie. Figure 8-49   Installing the Arm stopper
Figure 8-50   Assembling the Lower arm guide bracket
Figure 8-51   Tying the cables 

GE HEALTHCARE
DIRECTION 5394141, REVISION  1LOGIQ™ P5 SERVICE MANUAL 
Section 8-2 - DISASSEMBLY/RE-ASSEMBLY 8 - 29
8-2-6-4              Assembly procedure  (cont’d)
15.) Place the cables inside the slot  and connect power cable and DVI cable.
16.) Assemble the Cable bracket with 1 Screw (2159625, PH M4X8 W/SP)
17.) Screw 2 screws (2159634, BH M4X1 0 WHT) to assemble the Cable clamp.
Figure 8-52   Placing the Cables
Figure 8-53   Assembling the Cable bracket Figure 8-54   Assembling the Cable clamp 

GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL  
8 - 30 Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
8-2-6-4              Assembly procedure  (cont’d)
18.) Place the cables like the figure below. 
19.) Screw 1 screw (2306565, BH M4X16 WHT) to fix the Power cable. Figure 8-55   Placing the cables
Figure 8-56   Assembling the power cord bracket 

GE HEALTHCARE
DIRECTION 5394141, REVISION  1LOGIQ™ P5 SERVICE MANUAL 
Section 8-2 - DISASSEMBLY/RE-ASSEMBLY 8 - 31
8-2-6-4              Assembly procedure  (cont’d)
20.) Assemble the LCD cable cover.
Figure 8-57   Assembling the LCD cable cover 

GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL  
8 - 32 Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
8-2-6-4              Assembly procedure  (cont’d)
21.) Screw 3 screws (2159634, BH M4x10 WHT) after  placing the neck front cover and neck Rear cover.
22.) Screw 1 screw (2159625, PH M4X8 W/SP) to assemble the Lock Knob. Figure 8-58   Assembling the neck front cover and the neck rear cover
Figure 8-59   Assembling the Lock Knob 

GE HEALTHCARE
DIRECTION 5394141, REVISION  1LOGIQ™ P5 SERVICE MANUAL 
Section 8-2 - DISASSEMBLY/RE-ASSEMBLY 8 - 33
8-2-6-4              Assembly procedure  (cont’d)
23.) Screw 1 screw (2329677, TAP M4X16) to assemble the Lock Cover. 
Figure 8-60   Assembling the Lock Cover 

GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL  
8 - 34 Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
8-2-6-4              Assembly procedure  (cont’d)
24.) Screw 2 screws (2159632, BH M4X6 WHT) to assemble the Cam Cover L & R.
25.) Screw 1 screw (2329677, TAP M4X16) to assemble the Fold Cover. Figure 8-61   Assembling the Cam Cover L & R
Figure 8-62   Assembling the Fold Cover