Epson Aculaser M 2000 Service Manual
Have a look at the manual Epson Aculaser M 2000 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 256
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 256
Confidential
Standard Cassette Paper Feed Clutch (CL2)
1. Remove the E-ring [1], three Screws [2] and remove the Standard Cassette Feed Clutch
Cover [3].
B7
[3][2] [1] [2]
2. Remove the E-ring[4] and three Screws [5] and then remove the Standard Cassette Feed Clutch
Cover [6].3. Remove Upper conductive spring cover [9] by removing the screw [7] and Upper
conductive spring [8].
[7]
[9][8]
[6] [4]
[5]
[5]](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-255.png "Page 256
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 256
Confidential
Standard Cassette Paper Feed Clutch (CL2)
1. Remove the E-ring [1], three Screws [2] and remove the Standard Cassette Feed Clutch
Cover [3].
B7
[3][2] [1] [2]
2. Remove the E-ring[4] and three Screws [5] and then remove the Standard Cassette Feed Clutch
Cover [6].3. Remove Upper conductive spring cover [9] by removing the screw [7] and Upper
conductive spring [8].
[7]
[9][8]
[6] [4]
[5]
[5]")
![Page 257
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 257
Confidential4. Remove the Conductive Spring Assy [11] by removing two Hooks [10].
The upper Hook of Conductive Spring Assy is disabled downside with tweezers.[11]
[10]
Before Releasing
After Releasing
[10] [11]
5. Remove three Screws [12] and two E-rings [13] and then remove the Drive Cover [14].
6. Remove the Feed Clutch [16] by removing the Connector [15].
[16]
[15]
[14]
[12] [12]...](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-256.png "Page 257
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 257
Confidential4. Remove the Conductive Spring Assy [11] by removing two Hooks [10].
The upper Hook of Conductive Spring Assy is disabled downside with tweezers.[11]
[10]
Before Releasing
After Releasing
[10] [11]
5. Remove three Screws [12] and two E-rings [13] and then remove the Drive Cover [14].
6. Remove the Feed Clutch [16] by removing the Connector [15].
[16]
[15]
[14]
[12] [12]...")
![Page 258
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 258
Confidential
Be cautious following things when installing the Feed Clutch.†
Let the Cable into the Notch.
†
Match the Rotation Stopper of the Clutch [17] with the Tab of the Main Unit [18]
surely.
[18]
[17]
1st Image Transfer Pressure/Retraction Position Sensor
(PC6)
1. Remove the 1st Image Transfer Pressure/Retraction Position Sensor Unit [3] by removing
the Screw [1] and Connector [2].
C7
[3][1] [2]](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-257.png "Page 258
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 258
Confidential
Be cautious following things when installing the Feed Clutch.†
Let the Cable into the Notch.
†
Match the Rotation Stopper of the Clutch [17] with the Tab of the Main Unit [18]
surely.
[18]
[17]
1st Image Transfer Pressure/Retraction Position Sensor
(PC6)
1. Remove the 1st Image Transfer Pressure/Retraction Position Sensor Unit [3] by removing
the Screw [1] and Connector [2].
C7
[3][1] [2]")
![Page 262
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 262
Confidential
Right Rear Cover + Rear Cover
1. Open the Right Door [1].
2. Remove three Screws [2], and remove the Right Rear Cover [3].
3. Remove nine Screws [4], and remove the Rear Cover [5].
A1
B1
[1]
[3] [2] [4][4] [4]
[5]
High Voltage Unit (HV1)
1. Disconnect four Connectors [1].
2. Remove five Screws [2] and the Tab [3], and remove the High Voltage Unit [4].
A2
B2
[1][2]
[3]
[4]](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-261.png "Page 262
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 262
Confidential
Right Rear Cover + Rear Cover
1. Open the Right Door [1].
2. Remove three Screws [2], and remove the Right Rear Cover [3].
3. Remove nine Screws [4], and remove the Rear Cover [5].
A1
B1
[1]
[3] [2] [4][4] [4]
[5]
High Voltage Unit (HV1)
1. Disconnect four Connectors [1].
2. Remove five Screws [2] and the Tab [3], and remove the High Voltage Unit [4].
A2
B2
[1][2]
[3]
[4]")
![Page 263
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 263
Confidential
Make sure following things when installing the High Voltage Unit (HV1).†
Terminal end surely contacts (Refer to Figure 1).
†
Tab [5] surely set up (Refer to Figure 2).
Terminal end position
4038F2C087DA
Figure 1 Figure 2
†
Be cautious not to install the wrong Screw because two types of Screws [2] are
used. • M Mark: Screws for installing metallic parts (Space between thread is small).
• P...](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-262.png "Page 263
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 263
Confidential
Make sure following things when installing the High Voltage Unit (HV1).†
Terminal end surely contacts (Refer to Figure 1).
†
Tab [5] surely set up (Refer to Figure 2).
Terminal end position
4038F2C087DA
Figure 1 Figure 2
†
Be cautious not to install the wrong Screw because two types of Screws [2] are
used. • M Mark: Screws for installing metallic parts (Space between thread is small).
• P...")
![Page 264
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 264
Confidential
Front Door
1. Open the Front Door.
2. Remove the Screw [1] each to remove the Right and Left Stoppers [2].
3. Pull out the Right and Left Pins [3] to remove the Front Door [4].
A3
[1] [4][2]
4038F2C038DB
[3]
4038F2C039DA
Right Door
1. Open the Right Door.
2. Remove three Screws [1], and remove the Reinforcement plate [2] of the right door and
spring [3].
Remove the Spring with its...](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-263.png "Page 264
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 264
Confidential
Front Door
1. Open the Front Door.
2. Remove the Screw [1] each to remove the Right and Left Stoppers [2].
3. Pull out the Right and Left Pins [3] to remove the Front Door [4].
A3
[1] [4][2]
4038F2C038DB
[3]
4038F2C039DA
Right Door
1. Open the Right Door.
2. Remove three Screws [1], and remove the Reinforcement plate [2] of the right door and
spring [3].
Remove the Spring with its...")
![Page 265
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 265
Confidential3. Remove the Shoulder Screw [4].
4. Remove two Screws [5], and remove the Metal blanking plate [6].
[5]
[6]
[4]
4039F2C511DA
5. Remove two Screws [7] and remove the Rear Handle Assy Protect Cover [8].
6. Remove five Screws [9] and the Connector [10], and remove the Rear Handle Assy [11].
[9] [9] [10]
[11]
[9]
4039F2C513DA
[7]
[8]](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-264.png "Page 265
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 265
Confidential3. Remove the Shoulder Screw [4].
4. Remove two Screws [5], and remove the Metal blanking plate [6].
[5]
[6]
[4]
4039F2C511DA
5. Remove two Screws [7] and remove the Rear Handle Assy Protect Cover [8].
6. Remove five Screws [9] and the Connector [10], and remove the Rear Handle Assy [11].
[9] [9] [10]
[11]
[9]
4039F2C513DA
[7]
[8]")
![Page 266
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 266
Confidential7. Disconnect four Connectors [12].
8. Slide out the Paper Cassette 1.
[12][12] [12]
[12]
4039F2C514DA
9. Remove two Screws [13], and remove the Front Right Cover [14].
[14] [13]
[13]
4039F2C515DA](http://img.usermanuals.tech/thumb/23/100067/w64_aculaser-m-2000-service-manual-1509434342_d-265.png "Page 266
EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 266
Confidential7. Disconnect four Connectors [12].
8. Slide out the Paper Cassette 1.
[12][12] [12]
[12]
4039F2C514DA
9. Remove two Screws [13], and remove the Front Right Cover [14].
[14] [13]
[13]
4039F2C515DA")
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 261 ConfidentialDISASSEMBLY FLOWCHART A4B1 A1 B2 A2 B3 A3 B4B5 Start Right Rear Cover + Rear Cover (P. 262) High Voltage Unit (HV1) (P. 262) Front Door(P. 264)Right Door(P. 264) Standard cassette (P. 267) Optional Cassette (P. 268) Near Empty Assy (P. 269)
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 262 Confidential Right Rear Cover + Rear Cover 1. Open the Right Door [1]. 2. Remove three Screws [2], and remove the Right Rear Cover [3]. 3. Remove nine Screws [4], and remove the Rear Cover [5]. A1 B1 [1] [3] [2] [4][4] [4] [5] High Voltage Unit (HV1) 1. Disconnect four Connectors [1]. 2. Remove five Screws [2] and the Tab [3], and remove the High Voltage Unit [4]. A2 B2 [1][2] [3] [4]
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 263 Confidential Make sure following things when installing the High Voltage Unit (HV1).† Terminal end surely contacts (Refer to Figure 1). † Tab [5] surely set up (Refer to Figure 2). Terminal end position 4038F2C087DA Figure 1 Figure 2 † Be cautious not to install the wrong Screw because two types of Screws [2] are used. • M Mark: Screws for installing metallic parts (Space between thread is small). • P Mark: Screws for installing plastic parts (Space between thread is large). P MarkM Mark
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 264 Confidential Front Door 1. Open the Front Door. 2. Remove the Screw [1] each to remove the Right and Left Stoppers [2]. 3. Pull out the Right and Left Pins [3] to remove the Front Door [4]. A3 [1] [4][2] 4038F2C038DB [3] 4038F2C039DA Right Door 1. Open the Right Door. 2. Remove three Screws [1], and remove the Reinforcement plate [2] of the right door and spring [3]. Remove the Spring with its tension loosened by declining right before the Left Door is closed.A4 [1] [2] [3] 4039F2C510DA
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 265 Confidential3. Remove the Shoulder Screw [4]. 4. Remove two Screws [5], and remove the Metal blanking plate [6]. [5] [6] [4] 4039F2C511DA 5. Remove two Screws [7] and remove the Rear Handle Assy Protect Cover [8]. 6. Remove five Screws [9] and the Connector [10], and remove the Rear Handle Assy [11]. [9] [9] [10] [11] [9] 4039F2C513DA [7] [8]
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 266 Confidential7. Disconnect four Connectors [12]. 8. Slide out the Paper Cassette 1. [12][12] [12] [12] 4039F2C514DA 9. Remove two Screws [13], and remove the Front Right Cover [14]. [14] [13] [13] 4039F2C515DA
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 267 Confidential10.Remove the Screw [15], and remove the Shaft [16]. 11.Remove the Right Door [17]. [15][17] [16] 4039F2C516DA Paper Cassette 1 1. Slide out the Standard Paper Cassette [1]. B3 [1]
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 268 Confidential2. Slide out the Standard Paper Cassette with pressing the Slide Locks [2] at both ends. [2][2] Optional Cassette 1. Slide out the Optional Cassette [1]. B4 [1]
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 269 Confidential2. Remove the Screw [2] and remove the Stopper [3]. 3. Remove the Optional Cassette with while pressing the Slide Lock [4]. [3] [4] [2] Near Empty Assy 1. Pick up and remove the Actuator from the front side. 2. Remove the Screw [1] from the rear side. B5 [1]
EPSON AcuLaser C9200NRevision D DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 270 Confidential3. Put the Near Empty Assy [2] through the hole of the Flame bringing down the Near Empty [2] Assy to the rear side from the front side. [2] 4. Remove two Connectors and remove the Near Empty Assy. When installing, insert the white Connector into the Connector of the front side [3] and insert the blue Connector into the Connector of the rear side [4]. [3] [4]