Epson Aculaser CX28DN User Manual
Have a look at the manual Epson Aculaser CX28DN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Configuration Menu Overview 39 *1 This menu item appears when ADMIN. MANAGEMENT/NET- WORK SETTING/TCP/IP is set to ENABLE.*2 This menu item appears when ADMIN. MANAGEMENT/NETWORK SETTING/IPv6/DISABLE/ENABLE is set to ENABLE.*3 This menu item appears when ADMIN. MANAGEMENT/E-MAIL SETTING/POP BEFORE SMTP/DISABLE/ENABLE is set to ENABLE.*4 This menu item appears when ADMIN. MANAGEMENT/E-MAIL SETTING/SMTP AUTH./DISABLE/ENABLE is set to ENABLE.*5 This menu item appears when ADMIN. MANAGEMENT/LDAP SETTING/DISABLE/ENABLE is set to ENABLE. DATE&TIME DATE FORMAT PRESET ZOOM SUPPLIES REPLACETRANSFER BELT FUSER UNIT TRANSFER ROLLER
Configuration Menu Overview 40 Manufacturer’s default settings appear in bold. ADMINISTRATOR NO.Specify the new administrator access code. NETWORK SETTINGTCP/IPSettingDISABLE / ENABLE Select the setting for connecting to this machine through a network. IP ADDR. SET- TINGSettingAUTO / SPECIFY Set the IP address of this printer on the network. If AUTO is selected, the IP address will be assigned automatically. If SPECIFY is selected, manually spec- ify settings for IP ADDRESS, SUB- NET MASK and GATEWAY. DNS DNS AUTO SET- TINGSettingDISABLE / ENABLE Select whether or not the DNS server address is automatically assigned by the DHCP server. SPEC- IFYSpecify the DNS server address (up to three addresses). The default setting is “0.0.0.0”. DHCPSettingDISABLE / ENABLE If there is a DHCP server on the net- work, specify whether the IP address and other network information is auto- matically assigned by the DHCP server. BOOTPSettingDISABLE / ENABLE If there is a BOOTP server on the net- work, specify whether the IP address and other network information is auto- matically assigned by the BOOTP server. ARP/PINGSettingDISABLE / ENABLE Select whether or not the ARP/PING command is used when the IP address is assigned.
Configuration Menu Overview 41 HTTPSettingDISABLE / ENABLE Select whether or not to enable HTTP. FTPSettingDISABLE / ENABLE Select whether or not to enable the FTP server. SMBSettingDISABLE / ENABLE Select whether or not to enable SMB. BONJOURSettingDISABLE / ENABLE Select whether or not to enable Bonjour. DYNAMIC DNSSettingDISABLE / ENABLE Select whether or not to enable Dynamic DNS. IPPSettingDISABLE / ENABLE Select whether or not to enable IPP. If HTTP is set to DISABLE, IPP cannot be set. RAW PORTDIS- ABLE/ ENABLESettingDISABLE / ENABLE Select whether or not to enable the raw port. BIDI- REC- TIONALSettingDISABLE / ENABLE Select whether or not to enable raw port bidirectional communication. SLPSettingDISABLE / ENABLE Select whether or not to enable SLP. SNMPSettingDISABLE / ENABLE Select whether or not to enable SNMP. WSD PRINTSettingDISABLE / ENABLE Select whether or not to enable WSD printing. IPSECSettingDISABLE / ENABLE Select whether or not to enable IPsec.
Configuration Menu Overview 42 IP ADDR. FILTERACCESS PER.SettingDISABLE / ENABLE Specify access permissions for IP address filtering. ACCESS REFUSESettingDISABLE / ENABLE Specify access blocking for IP address filtering. IPv6 DIS- ABLE/ ENABLESettingDISABLE / ENABLE Select whether or not to enable IPv6. AUTO SET- TINGSettingYES/NO Select whether or not to enable the IPv6 auto setting. LINK LOCALDisplays the link-local address. GLOBAL ADDRES SDisplays the global address. GATE- WAY ADDRES SDisplays the gateway address. NETWARESettingDISABLE / ENABLE Select whether or not to enable Net- Ware. APPLETALKSettingDISABLE / ENABLE Select whether or not to enable Apple- Ta l k . SPEED/DUPLEXSettingAUTO / 10BASE-T FULL / 10BASE-T HALF / 100BASE-TX FULL / 100BASE-TX HALF / 1000BASE FULL Specifies the transmission speed for the network and the transmission method for bi-directional transmission.
Configuration Menu Overview 43 IEEE802.1XSettingDISABLE / ENABLE Select whether or not to enable IEEE802.1X. E-MAIL SETTINGSMTPSettingDISABLE / ENABLE Select whether to enable or disable e-mail transmission operations for this machine. SENDER NAMESpecify the name of the E-mail sender (up to 20 characters) used for network scanning. The default setting is “EPSON AL-CX28”. E-MAIL ADDRESSSpecify the E-mail address (up to 64 characters) of the E-mail sender used for network scanning. DEFAULT SUB- JECTSpecify the subject (up to 20 characters) of the E-mail message used for network scanning. The default setting is “from EPSON AL-CX28”. SMTP SERVER ADDR.Specify the IP address or host name (up to 64 characters) for the SMTP server. The default setting is “0.0.0.0”. SMTP PORT NO.Setting1 to 65535 (Default: 25) Specify the port number communicating with the SMTP server. SMTP TIMEOUTSetting30 to 300 sec (Default: 60 sec) Select the amount of time (in seconds) until the connection with the SMTP server times out. TEXT INSERTSettingOFF / ON Select whether or not the specified text is inserted into the E-mail message.
Configuration Menu Overview 44 POP BEFORE SMTPDIS- ABLE/ ENABLESettingDISABLE / ENABLE Select whether or not to enable POP Before SMTP. If ENABLE is selected, specify the time (between 0 and 60 seconds). The default setting is 1sec. POP3 SERVER ADDR.Specify the host name or IP address for the POP3 server used for authentication with POP Before SMTP. The default setting is “0.0.0.0”. POP3 PORT NO.Setting1 to 65535 (Default: 110) Specify the port number used for com- municating with the POP3 server. POP3 TIME- OUTSetting30 to 300 sec (Default: 30 sec) Select the amount of time (in seconds) until the connection with the POP3 server times out. POP3 ACCOUNTSpecify the user name (up to 63 charac- ters) used for authentication with POP3 server. POP3 PASS- WORDSpecify the password (up to 15 charac- ters) used for authentication with POP3 server. SMTP AUTH.DIS- ABLE/ ENABLESettingDISABLE / ENABLE Select whether or not to enable SMTP authentication. SMTP USER- NAMESpecify the user name (up to 63 charac- ters) used for SMTP authentication. SMTP PASS- WORDSpecify the password (up to 15 charac- ters) used for SMTP authentication.
Configuration Menu Overview 45 LDAP SETTINGDISABLE/ENABLESettingDISABLE / ENABLE Select whether or not to enable the LDAP function. LDAP SERVER ADDR.Specify the address (up to 64 charac- ters) of the LDAP server. The default setting is “0.0.0.0”. LDAP PORT NO.Setting1 to 65535 (Default: 389) Specify the port number of the LDAP server. SSL SETTINGSettingDISABLE / ENABLE Select whether or not to enable SSL. SEARCH BASESpecify the search starting point (up to 64 characters) in a hierarchical structure arranged on the LDAP server. ATTRIBUTEThe conditions for searches can be specified as a name or e-mail address (up to 32 characters). The default setting is “cn”. SEARCH METHODSettingBEGIN / CONTAIN / END The specified characters can be searched for at the beginning, within or at the end. LDAP TIMEOUTSetting5 to 300 sec (Default: 60 sec) Specify the maximum wait time during a search. MAX.SEARCH RESULTSSetting5 to 100 (Default: 100) Specify the maximum number of desti- nations displayed after a search. AUTHENTICATIONSettingANONYMOUS / SIMPLE / DIGEST-MD5 / GSS-SPNEGO Select the authentication method used for logging on to the LDAP server. LDAP ACCOUNTSpecify the account (up to 64 charac- ters) used to connect to the LDAP server.
Configuration Menu Overview 46 LDAP PASSWORDSpecify the password (up to 32 charac- ters) used to connect to the LDAP server. DOMAIN NAMESpecify the domain name (up to 64 characters) used to connect to the LDAP server. CAMERA DIRECTSettingDISABLE / ENABLE USER SETTINGCOUNTRY SET- TING SettingARGENTINA / AUSTRA- LIA / AUSTRIA / BEL- GIUM / BRAZIL / CANADA / CHINA / CZECH / DENMARK / EUROPE / FINLAND / FRANCE / GERMANY / GREECE / HONG KONG / HUNGARY / IRELAND / ISRAEL / ITALY / JAPAN / KOREA / MALAYSIA / MEXICO / THE NETHERLANDS / NEW ZEALAND / NORWAY / PHILIPPINES / POLAND / PORTUGAL / RUSSIA / SAUDI ARA- BIA / SINGAPORE / SLOVAKIA / SOUTH AFRICA / SPAIN / SWE- DEN / SWITZERLAND / TAIWAN / TURKEY / U.S.A / UNITED KING- DOM / VIETNAM Select the country where this machine is installed.
Configuration Menu Overview 47 DATE&TIMESettingTIME: 00:00-23:59 (Default: 00:00) DATE: ’00/01/01-’99/12/31 (Default: ’ 09/01/01) ZONE: GMT+12:00-GMT-12:00 (in 30-minute intervals) (Default: GMT+00:00) Use the keypad to specify the current date, time and time zone. DATE FORMATSettingMM/DD/YY / DD/MM/YY / YY/MM/DD Select the display format for reports and lists. PRESET ZOOMSettingINCH / METRIC Select the measurement units for the preset zoom ratios. SUP- PLIES REPLACETRANSFER BELTReplace the counter when the transfer belt unit is replaced with new one. FUSER UNITReplace the counter when the fuser unit is replaced with new one. TRANSFER ROLLERReplace the counter when the transfer roller is replaced with new one.
Configuration Menu Overview 48 COPY SETTING Menu Manufacturer’s default settings appear in bold. COPY SETTING PAPER PRIORITY QUALITY PRIORITY DENSITY PRIORITY DENSITY LEVEL AUTO MANUAL OUTPUT PRIORITY 4IN1 COPY ORDER DUPLEX COPY PAPER PRIOR- ITYSettingTRAY1 / TRAY2 / TRAY3 Specify the paper tray that is normally used. If an optional lower feeder unit is not installed, TRAY3 does not appear. QUALITY PRI- ORITYSettingMIX , TEXT , PHOTO , FINE/MIX , FINE/TEXT , FINE/PHOTO Select the type of document being copied. If MIX or FINE/MIX is selected, select either AUTO ON or AUTO OFF for the auto segmentation (The den- sity is darkened for text.).