Epson Aculaser CX28DN User Manual
Have a look at the manual Epson Aculaser CX28DN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PS/PCL PRINT Menu 79 CMYK DENSITYCYAN/ MAGENTA/ YELLOW/ BLACKHIGH- LIGHT Setting+3/+2/ +1/0/ -1/-2/ -3 The density of the highlight color in images can be adjusted. MIDDLESetting+3/+2/ +1/0/ -1/-2/ -3 The density of the middle color in images can be adjusted. SHADOWSetting+3/+2/ +1/0/ -1/-2/ -3 The density of the shadow color in images can be adjusted. COLOR SEPARA- TIONSettingON/OFF If ON is selected, color separation are performed. The contents of a color page is separated into the color pages for yellow, magenta, cyan and black, and each is printed with black gradations as individual pages. The printing order is yellow, magenta, cyan, then black. If OFF is selected, color separation is not performed. A normal color separation is performed.
PS/PCL PRINT Menu 80 SYS DEFAULT MENU SYS DEFAULT MENUEMULATION DEF. EMULA- TION POSTSCRIPT WAIT TIME- OUT PS ERROR PAGE PS PROTOCOL PCL CR/LF MAP- PING LINES PER PAGE FONT SOURCE FONT NUMBER PITCH SIZE (POINT SIZE) SYMBOL SET PAPER DEFAULT PAPERPAPER SIZE CUSTOM SIZE PAPER TYPE
PS/PCL PRINT Menu 81 *1 This menu item appears only if an optional hard disk drive is installed. GRAYSCALE PAGE STARTUP OPTIONSDO STARTUP PAGE HOLD JOB TIMEOUT *1 HDD FORMAT*1USER AREA ONLY ALL
PS/PCL PRINT Menu 82 Manufacturers default settings appear in bold. EMULA- TIONDEF. EMULA- TIONSettingAUTO/POSTSCRIPT/PCL Specify the machine emulation language. If AUTO is selected, the machine automatically selects the machine emulation language from the data stream. POST- SCRIPTWAIT TIME OUTSetting0 to 300 (Default: 0) Specify the time until an error is determined to be a PostScript error. If 0 is selected, no timeout is performed. PS ERROR PAGESettingON/OFF Select whether or not an error page is printed when a Postscript error occurs. PS PROTO- COLSettingAUTO/NORMAL/BINARY Specify the protocol for data transmissions with a PostScript data stream. If AUTO is selected, the machine automatically selects an applicable protocol from the data stream.
PS/PCL PRINT Menu 83 PCL CR/LF MAP- PINGSettingCR=CR LF=LF/CR=CRLF LF=LF/CR=CR LF=LFCR/CR=CRLF LF=LFCR Select the definitions of the CR/LF codes in the PCL language. LINES PER PAGESetting5 to 128 (Default: 60) Specify the number of lines per page in the PCL language. FONT SOURCEFONT NUMBERSetting0 to 102 (Default: 0) Specify the default font in the PCL language. The font numbers that appear correspond to the PCL font list. For details on printing the font list, refer to “REPORT” on page 24. PITCH SIZE (POINT SIZE)Setting0.44 to 99.99 (Default: 10.00) ( 4.00 to 999.75 (Default: 12.00)) Specify the font size in the PCL language. If the selected FONT NUMBER is for a bitmap font, PITCH SIZE appears. If the selected FONT NUMBER is for an outline font, POINT SIZE appears. SYMBOL SETSpecify the symbol set used with the PCL language. The default setting is PC8.
PS/PCL PRINT Menu 84 PAPER DEFAULT PAPERPAPER SIZESettingLETTER/LEGAL/EXECU- TIVE/A4/A5/A6/ B5(JIS)/B6(JIS)/GOVT LETTER/STATEMENT/ FOLIO/SP FOLIO/UK QUARTO/FOOLSCAP/GOVT LEGAL/16K/PHOTO 4×6/ KAI 16/KAI 32/ENV C6/ ENV DL/ENV MONARCH/ ENV CHOU#3/ENV CHOU#4/B5(ISO)/ENV #10/JPOST 100x148/ JPOST-D 148x200/CUS- TOM Select the size of media that is normally used. Depending on the setting selected for UTILITY / ADMIN. MANAGEMENT / USER SETTING / PRESET ZOOM, PHOTO 4×6 may change to PHOTO 10×15. CUSTOM SIZE Specify the media size when PAPER SIZE is set to CUSTOM The Setting range for WIDTH is 3.63 to 8.50 inches (92 to 216 mm). The default setting is 8.27 inches (210 mm). The Setting range for LENGTH is 5.83 to 14.00 inches (148 to 356 mm). The default setting is 11.69 inches (297 mm).
PS/PCL PRINT Menu 85 PAPER TYPESettingPLAIN PAPER/ RECYCLED/THICK 1/ THICK 2/LABEL/ TRANSPARENCY/ ENVELOPE/POSTCARD/ LETTERHEAD/GLOSSY 1/ GLOSSY 2 Select the type of media that is normally used. GRAY- SCALE PAGESettingAUTO/GRAYSCALE PRINT/COLOR PRINT Specify the operation to be performed for black-and-white pages in a job specified for color printing. If AUTO is selected, printing is automatically performed accord- ing to the first page of the job. If GRAYSCALE PRINT is selected, black-and-white printing is automatically performed depending on each page. If COLOR PRINT is selected, color printing is performed, even for a black-and-white page. STARTUP OPTIONSDO START- UP PAGESettingON/OFF Select whether or not a startup page is printed when the machine is turned on. HOLD JOB TIME OUTSettingDISABLE/1 hour/4 hours/1 day/1 week Specify the length of time until print jobs saved on the hard disk are deleted. If DISABLE is selected, print jobs are not deleted at a specific time. HDD FORMATUSER AREA ONLYInitialize the user area of the hard disk. When this menu item is selected, the machine is automatically restarted. ALLInitialize the hard disk. When this menu item is selected, the machine is automatically restarted.
MEMORY PRINT Menu 86 MEMORY PRINT Menu To display the MEMORY PRINT menu, select MEMORY PRINT in the main screen (Copy mode), and then press the Select key. From this menu, mem- ory direct printing operations can be performed, and various memory direct printing settings can be specified. The MEMORY PRINT menu is structured as shown below. This menu item appears only if an optional hard disk drive is installed. In addition this menu item does not appear if public user access has not been permitted through authentication settings. For details on the authentication settings, refer to the Reference Guide on the software CD-ROM. Manufacturers default settings appear in bold MEMORY PRINT LIST OF FILES TYPE OF FILES
MEMORY PRINT Menu 87 . LIST OF FILESSelect the file that you wish to output, and then press the Select key. If the file to be printed is in a folder, select the folder, and then press the Select key. PAPER SELECTSettingLETTER/LEGAL/EXECUTIVE/A4/ A5/A6/B5(JIS)/B6(JIS)/GOVT LETTER/STATEMENT/FOLIO/SP FOLIO/UK QUARTO/FOOLSCAP/ GOVT LEGAL/16K/PHOTO 4×6/ KAI 16/KAI 32/ENV C6/ENV DL/ENV MONARCH/ENV CHOU#3/ ENV CHOU#4/B5(ISO)/ENV #10/ JPOST 100×148/JPOST-D 148×200/CUSTOM Change the size of the paper. Depending on the setting selected for UTILITY / ADMIN. MANAGEMENT / USER SETTING / PRESET ZOOM , PHOTO 4×6 may change to PHOTO 10×15 . This menu item does not appear if the selected file is PDF file. SIMPLEX/ DUPLEXSetting1-SIDE/2-SIDE If 2-SIDE is selected, you can get duplex printing. If LONG EDGE is selected, the page will be printed on both sides of the paper for long edge binding. If SHORT EDGE is selected, the page will be printed on both sides of the paper for short edge binding. If OFF is selected, duplex printing is not performed.
MEMORY PRINT Menu 88 LIST OF FILESCOPY QUANTITYSetting1 to 9999 (Default: 1) Specify the number of copies to be printed (between 1 and 9999). COPY FINISHIN GSettingNON-SORT/SORT Select whether to collate the copies. If NON-SORT is selected, collated printing is not performed. If SORT is selected, collated printing is performed. This menu item appears only if the optional hard disk drive is installed. TYPE OF FILESSettingPDF,JPEG,TIFF/PDF Select the type of files to be displayed.