Epson AcuLaser C4200DN User Manual
Have a look at the manual Epson AcuLaser C4200DN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Technical Specifications411 B B B B B B B B B B B B *1Use recycled paper only under normal temperature and humidity conditions. Poor quality paper may reduce print quality, or cause paper jams and other problems. *2When using extra thick paper, set the Paper Type setting in the printer driver to Extra Thick. Paper that should not be used You cannot use the following paper in this printer. It may cause printer damage, paper jams, and poor print quality: ❏ Media meant for other color laser printers, black-and-white laser printers, color copiers, black-and-white copiers, or ink jet printers ❏ Previously printed paper by any other color laser printers, black-and-white laser printers, color copiers, black-and-white copiers, ink jet printers, or thermal transfer printers Paper type Description Plain paper Weight: 60 to 105 g/m² (Recycled paper is acceptable. *1) Envelopes No paste and no tape. No plastic window. (unless specifically designed for laser printers.) Labels The backing sheet should be covered completely, with no gaps between labels. Thick paper Weight: 106 to 163 g/m² Extra thick paper Weight: 164 to 216 g/m² *2 Semi-Thick/EPSON Color Laser Paper Weight: 82 g/m² EPSON Color Laser Transparencies Weight: 140 g/m² Colored paper Non coated Paper with letterhead Paper and ink of letterheads must be compatible with laser printers.
412Technical Specifications ❏ Carbon paper, carbonless paper, thermal-sensitive paper, pressure-sensitive paper, acid paper, or paper that uses high-temperature-sensitive ink (around 190 °C) ❏ Labels that peel easily or labels that do not cover the backing sheet completely ❏ Coated paper or special surface-colored paper ❏ Paper that has binder holes or is perforated ❏ Paper that has glue, staples, paper clips, or tape on it ❏ Paper that attracts static electricity ❏ Moist or damp paper ❏ Paper of uneven thickness ❏ Overly thick or thin paper ❏ Paper that is too smooth or too rough ❏ Paper that is different on the front and back ❏ Paper that is folded, curled, wavy, or torn ❏ Paper of irregular shape, or paper that does not have right angle corners Printable area New :For Emulation5-mm minimum margin on all sides. (The printable width should be 207.9 mm or less.) Note: ❏ The printable area varies, depending on the emulation mode in use.
Technical Specifications413 B B B B B B B B B B B B ❏When using ESC/Page language, there is 5-mm minimum margin on all sides. ❏ The print quality may be irregular depending on the paper you use. Print on one or two sheets of pa per to check the print quality. Printer General New :For Emulation / confirm the product specification ( esp . Paper f eed alignment )
414Technical Specifications Printing method: Laser beam scanning and dry electrophotographic process Resolution: 4800 RIT *1 Continuous printing speed*2: A maximum of 35 pages per minute black and white printing on A4 size paper A maximum of 25 pages per minute color printing on A4 size paper Paper feed: Automatic or manual feed Paper feed alignment: Center alignment for all sizes Input paper supply: MP tray: Up to 150 sheets of plain paper (60~105 g/m²) Up to a 15 mm thick stack of envelopes Up to a 15 mm thick stack of transparencies Up to a 15 mm thick stack of labels Standard lower paper cassette: Up to 550 sheets of plain paper (60~105 g/m²) Paper output: For all paper types and size Paper output capacity: Up to 250 sheets of plain paper (60~105 g/m²) Duplex: Paper Type: Paper Size: Plain paper A4, B5, A5, Letter (LT), Executive (EXE), Government Legal (GLG), Legal (LGL) EPSON Color Laser Paper A4
Technical Specifications415 B B B B B B B B B B B B *1Epson AcuLaser Resolution Improvement Technology *2Printing speed varies by paper source or other conditions. Environmental Printer language: ECP/Page printer languageESC/P 2 24-pin printer emulation (ESC/P 2 mode) ESC/P 9-pin printer emulation (FX mode) IBM Proprinter emulation (I239X mode) Adobe PostScript3 Resident fonts: 84 scalable fonts, and 7 bitmap fonts RAM: 128 MB, expandable up to 640 MB Temperature: In use: 5 to 32°C (41 to 90°F) Not in use: -20 to 40°C (-40 to 104°F) Humidity: In use: 15 to 85% RH Not in use: 5 to 85% RH Altitude: 3,100 meters (10,170 feet) maximum
416Technical Specifications Mechanical Weight: Approx. 34.6 kg (about76.3 lb), excluding the consumables and options Durability 5 years or 600,000 pages, whichever comes first (under the condition of A4 size, horizontal plain paper) 437 mm588 mm 457 mm
Technical Specifications417 B B B B B B B B B B B B Electrical *Completely suspended. Compliant with the Energy Star program. Standard and approvals New :confirm the destinations / obtain t he d etails from ANKIU.S. model: European model: 120 V Model KDAS-1a 220-240 V Model KDBS-1a Voltage 120 V ± 10% 220 V-240 V ± 10% Rated frequency 50 Hz / 60 Hz ± 3 Hz50 Hz / 60 Hz ± 3 Hz Rated current Less than 10 ALess than 5 A Power consumption During printingAverage (Color printing) 357 W 329 W Average (Black and white printing) 437 W 409 W MAX 900 W 960 W During standby mode 70 W 71 W Sleep mode *Up to 21 W Up to 25 W Safety UL 60950 CSA No.60950 EMC FCC Part 15 Subpart B Class B CSA C108.8 Class B
418Technical Specifications Australian model: Laser safety This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation. Since radiation emitted by the laser is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.Low Voltage Directive 73/23/EEC EMC Directive 89/336/EECEN 60950 EN 55022 Class B EN 55024 EN 61000-3-2 EN 61000-3-3 EMC AS/NZS CISPR22 Class B
Technical Specifications419 B B B B B B B B B B B B CDRH regulations The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States. Interfaces Parallel interface Ne w :c on f ir m t h e s pe ci f i ca t i onUse the IEEE 1284-I compliant parallel interface connector. ECP mode/Nibble mode USB interface N ew :in cl ud i ng th e in f or ma t io n a bo u t Ma cUSB 2.0 High Speed mode Note: ❏Only computers equipped with a USB connector and running Mac OS 9.x or X and Windows XP, Me, 98, 2000, or Server 2003 support the USB interface.
420Technical Specifications ❏Your computer must support USB 2.0 in order to use USB 2.0 as the interface to connect your computer to the printer. ❏Since USB 2.0 is fully compatible with USB 1.1, USB 1.1 can be used as an interface. ❏USB 2.0 can be used with Windows XP, 2000, and Server 2003 operating systems. If your operating system is Windows Me or 98, use a USB 1.1 interface. Ethernet interface Ne w :N/ W st a nd ar d on lyYou can use an IEEE 802.3 100BASE-TX/10 BASE-T straight-through shielded, twisted-pair interface cable with an RJ45 connector. Note: Ethernet Interface may not be available depending on the printer model. Options and Consumable Products Optional paper cassette unit Ne w :de l et e un ne ce s sa r y i nf o rm at i on