Epson AcuLaser C4200DN User Manual
Have a look at the manual Epson AcuLaser C4200DN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Troubleshooting361 11 11 11 11 11 11 11 11 11 11 11 11 7. Close cover D and A. 8. Press the latch on cover B and open the cover. 9. Pull down the outer green knobs to open the paper path, and gently pull out any sheets of paper with both hands. w Warning: Be careful not to touch th e fuser, which is marked CAUTION HIGH TEMPERATURE , or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot.
362Troubleshooting 10. Close cover B. When the paper jam is cleared completely and the covers are closed, printing resumes from the page that jammed. Paper Jam A Follow the steps below to clear the jammed paper at cover A. 1. Press the latch on cover A and open the cover.
Troubleshooting363 11 11 11 11 11 11 11 11 11 11 11 11 2. Gently pull out any sheets of paper with both hands. w Warning: Be careful not to touch the fuser, which is marked CAUTION HIGH TEMPERATURE , or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot. 3. Open cover D.
364Troubleshooting 4. Grasp the handle of the photoconductor unit firmly and remove the unit from the printer. w Warning: Be careful not to touch th e fuser, which is marked CAUTION HIGH TEMPERATURE , or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot.
Troubleshooting365 11 11 11 11 11 11 11 11 11 11 11 11 Note: Make sure to place the photoconductor unit on the flat surface as shown below. 5. Gently pull out any sheets of paper with both hands. w Warning: Be careful not to touch th e fuser, which is marked CAUTION HIGH TEMPERATURE , or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot.
366Troubleshooting c Caution: Do not touch the rollers inside the printer. 6. Reinstall the photoconductor unit, making sure the posts on the sides of the unit slide into the slots. w Warning: Be careful not to touch th e fuser, which is marked CAUTION HIGH TEMPERATURE , or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot.
Troubleshooting367 11 11 11 11 11 11 11 11 11 11 11 11 7. Close cover D and A. When the paper jam is cleared completely and cover D and A are closed, printing resumes from the page that jammed. Paper Jam C A Follow the steps below to clear the jammed paper at cover A and in the MP tray or paper cassette unit. 1. Remove the paper set in the MP tray. If the paper is jammed in the MP tray, gently pull out any sheets of paper with both hands.
368Troubleshooting 2. Remove the paper cassette from the printer and discard any crumpled paper. Note: The illustration shows the standard lower cassette. If the optional paper cassette unit is installed, chec k the unit’s cassettes in the same way. 3. Gently pull out any sheets of paper with both hands. Note: Confirm that the jammed paper is no t still deep inside the printer.
Troubleshooting369 11 11 11 11 11 11 11 11 11 11 11 11 4. Reinsert the paper cassette into the printer. 5. Press the latch on cover A and open the cover.
370Troubleshooting 6. Gently pull out any sheets of paper with both hands. w Warning: Be careful not to touch th e fuser, which is marked CAUTION HIGH TEMPERATURE , or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot. 7. Open cover D.