Comdial Dxp Plus Instructions Manual

IO. 1.10Report OptionDescription:You can arrange for the SMDWSMDA parameters to convey either the cost of calls that the
stations make or the amount of time that lines have been on hold at the stations.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select 
SMDAISMDR and press ENTER.
3. From 
SMDA/SMDR programming menu, select SMDA/SMDR parameters
and press ENTER.
4. From 
SMDA/SMDR parameters menu, type item number for feature and press ENTER.
5. Press SPACE BAR for feature value.
6....

lMl66-123DXP PIus Programming Instrwetions
10.2SMDA ReportsDescription:
The SMDA feature allows the system to store various call records and generate reports of these
records for printout. These reports include either station, line, account codes, or all of the above.
When the system generates a station report, it will generate a separate report for any and 
al11
stations that have had outside call activity.
The station report shows all calls that the station user has made and received along with totals...

DXP Plus Programming instructionslMl66-123
10.2. IManual ReDortsDescription:Use the following programming procedure to manually command a printout to occur.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select printouts and press ENTER.
3. From printouts menu, select 
SMDAISMDR and press ENTER,
4. From 
SMDABMDR menu, select SMDA reports and press ENTER.
5. From SMDA reports menu, select desired report and press ENTER.
6. Press ESCAPE to end.
10.2.2Aufomafic ReDor&Description:Program...

10.2.3SMDA Retort ExamDIes
LINE GROUP SUMMARY__D---___--_D_------_o___o________LINE GROUPACCESSESFAILURES
--m-m-------
o--
3-
p
w-------
173112
4
80
5
00
9
08
1000
1100
1200
1300
1400
1500
1600__D---D_--___D--_o-_DDDD-Do----poD
10-IQ Call Costing and SMDABMDR Programming 

DXP Plus Programming InstructionslMl66-123
10.3Account Codes (Forced, with Positive Verification)
10.3.1Account Code (System Parameters)Description:
Account codes are used to identify calls by category or by any other desired grouping, so that
the system can record costing by that category. You can arrange the system to force the user to
enter an account code and have the system verify it before it allows the user to make a call. Turn
on the account code feature for the entire system using this...

/M/66-123DXP Plus Programming Instructions
10.3‘3Account Code LengfhDescription:
An account code can be a minimum of three digits or a maximum of 16 digits.
Use this
procedure to set the amount of account code digits.
NOTE: If you change the account code length you will deleteall currently programmed account codes.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select 
SMDAISMDR and press.
3. From 
SMDAKMDR menu, select SMDABMDR parameters and press ENTER.
4. From 
SMDABMDR parameters...

DXP Plus Programming Instructions/M/66-123
10.3.5Account Code (For Class Of Service)Description:
After you have enabled the account code feature for the system, set its parameters, and
programmed its list of account codes into the system, turn the feature on for a station class of
service and make it either forced or optional.If you make it a forced account code, the user
must enter an account code before the system will let him or her dial the number for an outgoing
call. Also, on incoming calls a user...

10.5Authorization Code
Description:
Authorization codes provide system users the mobility to use their class of service (COS)
features, prime line assignments, and exception numbers on any telephone in the system instead
of being limited by what is available to the particular telephone they happen to be using.
One
popular term for such a feature is 
walking class ofservice. Authorization codes are associated
with personal intercom numbers as are COS, prime markings, and exception numbers.
Therefore, when...

Programming Toll Resfricfion
l Toll Restriction Example 1...............11.1l 
TollRrestriction Example 2...............11.2l Toll Restriction Flow Diagram.............
11.3l Restriction Level Programming.............
11.4l Toll Groups 
Programming................11.5l Restricted Numbers Programming...........
11.6l Exception Number Programming............
11.7
With the toll restriction feature, the system allows or denies outgoing line calls to selected users over selected
lines. Toll restriction meets...

/M/66-323DXP Plus Programming instructions
11.1Toll Restriction Example “I
In this example, the chief executive can dial all telephone numbers except those numbers with a restriction level
of always deny. The section manager can dial all numbers except those in restriction level 8 (international
numbers over lines assigned 
totoll group 1) and those numbers with a restriction level of always deny. The unit
manager can dial all numbers except those numbers in restriction levels 7 and 8 (international...