Comdial Dxp Plus Instructions Manual

Programming For
Peripheral Devices
0 Caller ID Programming.................14.1l Tracker Paging System.................
14.2l Digital Voice Announce Programming.........
14.3l PC Attendant Position Programming..........
14.4l Voice Mail Programming................
14.5l 
ModemSetup......................14.6
Peripheral Devices Programming 14-l 

14. ICaller ID Programming
The DXP Plus caller ID feature supports an externally connected, customer-supplied caller ID device (product
code CIDOS). This hardware device supports eight caller ID conditioned lines, and the installer can serially
connect up to eight devices to give the DXP 
Plus the ability to support a maximum of 64 caller ID conditioned
lines, The caller ID unit interfaces with the DXP 
Plus through any main or auxiliary serial data port (Section 6.5).
Any proprietary digital LCD...

DXP Plus Programming instructionslMl66-123
14.1.3Arranging Local Call Table (for Caller ID)Description:
When telephone users review caller ID RNA calls, they press their SAVE button to return the
call, and the system automatically dials the number. If the area code or 
office code part of the
stored number matches the entries that you program with this procedure, the system will skip
that part of the number as it dials.Programming:
1.Press CONTROL T for main menu.
2.From main menu, select caller ID and...

lM166-123DXP Plus Programming instructions
14.1.5Setting Caller ID Baud RateDescription:
You must program the parameters of the main or auxiliary serial data port where the installer
has connected the CID08 device. The serial data port parameters must match the data
parameters of the CID08 device. Usually, this is 9600 baud, eight data bits, no parity bit, and
one stop bit.Programming:
1.Press CONTROL T for main menu.
2.From main menu, select system and press ENTER.
3.From system menu, select serial...

DXP Plus Programming InstructionslMl66-123
14.2Tracker Paging System Programming
The Tracker Paging System is a paging device that interfaces a DXP Plus system with Tracker pagers (personal
pager devices). When the Tracker Paging System is installed, you must use the following programming routines
to establish proper communications between the system and individual Tracker pager users.
14.2. IProgramming Tracker Paging System OptionsDescription:
Tracker Paging System options consist of selecting the...

/M/66-123DXP Pius Programming Instructioms
14.2.2Making Tracker Paging System AssignmentsDescription:
Use the following programming instructions to assign individual Tracker Pagers to a station
extension number, select the pager types, and assign a block of pagers to a Tracker Paging
System base station. Use this programming method for making minor modifications after the
system has been installed and programmed per instructions in Section 
1$.X?.Programming:
1.Press CONTROL T for main menu.
2From main...

DXP Plus Programming InstructionsIMl66-123
74.2.4COS Programming For Tracker AccessDescription:
Assign tracker access to a particular station intercom or group of intercoms using the following
class of service (COS) programming. (The default is yes for COS 1 and COS32.)Programming:
1. Press CONTROL T for main menu.
2. From main menu, select Stations and press 
ENTER.
3. From stations menu, select COS Programming and press ENTER.
4. From COS programming, type class of service number (l-32) and press...

/M/66-123DXP Plws Programming hstrwctions
14.3LVigital Voice Announce Programming
The digital voice announce device (DVA) is an optional line-powered unit that connects to a digital station port
and plays pre-recorded voice prompts and dialing instructions to incoming callers on the direct inward system
access (DISA) lines.
Currently, DISA is the only DXP 
Plus feature to take advantage of the DVA’s voice prompting capability;
therefore, for the DVA to function, you 
must have DISA lines assigned and...

DXP Plus Programming instructionsIMIH-123
14.3.1Understanding The Line/Voice Option/IDVA Relationships
DVA ApplicationA company with several departments reserves all group 1 messages for the sales department and reserves all
group 2 messages for the customer service department. The company attendant records the group 1 and 2 message
to have meaning for the sales and customer service departments. The system programmer assigns DISA lines 
1,2,and 3 to the sales department and DISA line 
4,5, and 6 to the...

lM166-123DXP Plus Programming Instructions
DVA Auto Attendant With Single Digit Menu ApplicationThe DVA functions as an automatic attendant by giving callers single-digit dialing options. The 
DXI? Plus
connects to the incoming call based on the programmed DISA parameters and the DVA plays the appropriate
voice prompts to the caller such as: welcome greeting, day main greeting-menu choices, recall busy, recall no
answer.DVA Index 
Number10“Welcome Greeting I 
”DVA Index Number 14
‘Day/Night Menu I 
”...