Comdial Dxp Plus Instructions Manual

DXP Plus Programming InstructionsIMl66-123
14.5Voice Mail Programming
After connecting an voice mail system to the DXP Plus system, program the DXP Plus to operate properly with it
using the procedures detailed below.They are presented here in a typical order of progression but you can
perform them in any order that is convenient.
14.5.1Arranging Station Ports For Voice Mail UseDescription:
After you or your installer has connected voice mail ports to the system station ports through the
appropriate...

/M/66-123DXP Plus Programming Instructions
14.5.2Assigning Infercorn Numbers To Voice Mail Connections
Description:You must identify the station intercom number of each voice mail connection and link these
numbers together to form a circular hunt group for call handling purposes. For example, assign
intercom numbers 121, 122, 123, and 124 to voice mail ports 
1,2,3, and 4 then link 121 to 122,
122 to 123,123 to 124, and 124 to 121.
Proqamminp Hint: To make the LCD readouts at the system telephones more...

DXP Plus Programming InstructionslMi66-123
14.5.3Arranging Voice Mail Ca// Transfer ParametersAutomatic Attendant Transfer On Busy
Description:
With automatic attendant transfer on busy enabled, the system will ring a busy telephone when
the voice mail system is attempting to transfer a call to that station. This action gives the user of
the called station the option of interrupting his or her present call and taking the new call.
With automatic attendant transfer on busy disabled, the presence of a new...

14.5.4Assianina Transfer-To-Voice Mail ButtonDescription:
A system user can use a pre-programmed button to transfer an incoming call directly to a voice
mail box so the caller can leave a message. You must use 
the button mapping programming
procedure to assign this Transfer-To-Voice Mail button at a system telephone.Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select button mapping and press ENTER.
4. Type prime intercom number...

DXP Plus Programming InstructionslMl66-123
14.5.6Assigning Voice Mail Identification (ID) Number
Description:As an option, you can assign an identification number to each DXP Plus line so that the voice
mail system can provide customized call handling on a per line basis. Use voice mail system
programming to match this ID number to a particular personal directory or transaction boxwithin the voice mail system.
When the DXP PZus routes a call that is ringing at a particular
line to the voice mail system...

/M/66-123DXP Plws Programming fnstrwcti~ns
14.5.8Setting The Voice Mail Integration DigitsDescription:
You can choose the DTMF digits that the DXP Plus sends to a voice mail system. A voice mail
system uses these DTMF digits to determine system and station status so that it can properly
process a call. You must be versed in your voice mail’s requirements before you can assign
DTMF integration digits in the DXP 
Plus. The system defaults the voice mail parameters to
match the Comdial voice mail system....

DXP Plus Programming Instructions/M/66-123
Programming The Voice Mail Integration DigitsProgramming:
1.Press CONTROL T for main menu.
2.From main menu, select peripherals and press ENTER.
3.From peripherals menu, select voice mail and press ENTER.
4.From the voice mail menu select integration digits and press ENTER.
5.From the integration digits menu, type row number for item and press ENTER.
6.Type entry and press ENTER.
7.Repeat step 6 until finished.
8.When finished, press ESCAPE twice.
9.Type y to...

/M/66-123DXP Plus Programming hstrwtions
14.6Modem SetupDescription:
The system supports the operation of the DXMDM serial data modem. The DXMDM is a
general-purpose, Hayes*-compatible, 300, 1200, and 2400 automatic baud detect, serial data
modem that receives its operating power and configuration programming from the DXP 
PLUS
system. The CPU board provides a dedicated serial data port for DXMDM modem use. Install
and connect the DXMDM per the details described in 
IMI89 185, Installation Instructions...

Configuring The System’s
Board Layoutl Understanding The Board Configuration........15.1
l Examining The Board Status..............15.2
l Adding Boards To The System.............15.3
l Deleting Boards From The System...........15.4
l Moving Boards Within The System...........15.5
Board Layout Programming 15-1 

lMl66-123DXP Plus Programming hstructions
15.1Understanding The Board Configuration Feature
Because there are no dedicated station or line ports in the DXP plus, the system uses an automatic configuration
method to logically number its stations and lines. Automatic configuration occurs after you perform a master clear
on the system.
How automatic
configuration
works
How logical
number and
physical
location relate
to one another
Where you can
place circuit
boards
Adding boards
without
renumberingWith...