Home > Comdial > Communications System > Comdial Dxp Plus Instructions Manual

Comdial Dxp Plus Instructions Manual

Here you can view all the pages of manual Comdial Dxp Plus Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 1001

152Examining The Board StatusDescription:This programming procedure allows you to examine the board layout for the entire system and
determine each board’s operating status.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select board configuration and press ENTER.
3. From board configuration menu, select status and press ENTER.
4. From the ensuing screen presentation, examine the board status for the system.
5. When finished, press ESCAPE twice.
15.3Adding Boards To The...

Page 1002

IndexA
Abandon Hold Release8.1.10
Absorb Ring Time (for Caller ID), Setting14.1.2
Account Code (For Class Of Service)
IO.35
Account Code (System Parameters)10.1.5, 10.3.1
Account Code Display And Account Code
Display Time10.1.6, 10.3.2
Account Code Length10.1.7, 10.3.3
Account Code Programming10.3.4
Account Codes (Forced with Positive 
Verificatiori).l.l,lO.3
10.3.4
7.1.40
9.3
7.1.41
7.2.24
8.4.2
10.1.2 Account Codes, Add, Remove, Display
Account Codes, Forced
Adding Intercom Numbers
Allow Busy Display...

Page 1003

C
Call Announce Beeps
Call Announce Tone Bursts
Call Announce
Call Cost Display
Call Forward
Call Park Access
Call Park Recall
Call Park
Call Pick-Up, Enable
call Pick-Up Group
Call Pick-Up
Call Waiting (Tone)
Caller ID Active, Making
Caller ID Active
Caller ID Baud Rate, Setting
Caller ID Programming
Caller ID Ring No-Answer (RNA)
Camp-On/Automatic Call Back Ring
Camp-On/Call Back
Camp-On Originate, Camp-On Receive
Camp-On Programming
Camp-On Tone
Central Message Desk
Class-Of-Service, Block...

Page 1004

DXP Plus Programming Instructions/M/66-123
Do Not Disturb Inhibit
Do Not Disturb Override
Do Not Disturb Programming
DSS/BLF Consoles Installed
DTMF Extended Dialing
DTMF Level
DVA Application
DVA Auto Attendant With Single Digit
Menu Application
DVA/DISA Application
DVA Messages, Defining
DVA Messages, Editing The
DVA Messages, Recording The
DVA Operation, Programming For
DVA Status Reports, Obtaining
DVAlTracker Paging System Application7.1.11
7.1.11
7.1.11
7.2.26
6.8.4,7.2.31
8.1.13,8.7.1
14.3.1E...

Page 1005

I
Idle Line Preference
Idle Line Priority
Idle Line Programming
Immediate Transfer
Industry-Standard Telephone Support
Initial Tracker Pager Assignments, Making
Installing The VMMI Software Program
Interactive Button Support
Intercom Hunt List
Intercom Number Forwarded To
Intercom Number, Personal
Intercom Numbers, Modifying
Intercom Numbers, Programming
Intercom Numbers To Voice Mail7.1.14
7.%.14,7.2.5
7.1.1414.53
7.2.35
14.2.3
1.2
7.2.32
7.26,9.3.2
7.2.11
7.2.19.2
9
Connections, Assigning
14.5.2...

Page 1006

DXP Plus Programming InstructionslMi66-123N
Night Ring7.2.13
Night 
Transfer-Gf Ringing7.2.13
0
On Board Software Upgrade6.1.12
Operator Station6.9.13
Out Dial Delay Time6.8.14P
Pad Level-Transmit, Receive6.13.7,8.1.18
Page, Meet Me Answer7.1.17
Page Recall6.8.2, 14.2.5
Paging Access
6.10.2,6.8.5
Paging Programming6.10
Paging Receive
6.10.4,7.1.21
Paging Transmit6.10.3,7.1.22
Paging Zones6.10
Password, Changing The6.11.1
Password Programming6.11
Pause Time
6.6.1,6.8.7
Personalized Ringing Tone
Phone...

Page 1007

/M/66-123DXP Pius Programming fnsfrucfions
R
Recall Call Forward7.1.5
Recall/Flash
6..8.7
Recall, Timed
6.8.5
Relays , External Paging Equipment Control6.10.6
Relays (External 
Tl Alarm Reporting)6.13.1
Relays, Line Answer From Any Station
6.10.7
Reloading Or Up-Grading The System Software1.4
Remote COS Programming
8.8.4
Remote Day/Night Exception Number
7.1.30,8.4.5
Remote Station Disable7.129
Removing Intercom Numbers9.4
Renumbering Intercom Numbers
9.5
Reports, Automatic10.22
Reports, SMDA,...

Page 1008

DXP Plus Programming Instructions/M/66-123
T
Tl Parameters, Programming The
Tl Status Log Parameters, Programming The
Tl Status Reporting And Major Alarm Alerting
Tl Status Reporting
Tables Default
Telephone Types
Terminal Emulation Programming, Performing 
The6.13
6.13.2
6.13.1
6.9.7
6.1.71.45
Terminal Mode Definitions, Reviewing The3.3
Terminal Setup6.2
Thru Dialing (Through Dialing)7.2.21
Tie Line Non-Standard Protocol Signalling8.7.1
Tie Line Parameters8.7.1
Tie Line Standard-Protocol Signalling...

Page 1009

Digital Communications System
Programming Records
The record charts included in this
publication reflect software
releases through 11A.
R
Printed in U.S.A.IMI66-125.03
3/97 

Page 1010

CERTIFIED
ISO 9001
Accredited by the Dutch Council
for Accreditation for certification
and registration activities.CERTIFICAT
ION
Comdials Quality Management System Is
Certified To The ISO 9001 Standard.
ACCR
RE
ISTR
RA
ED
D
ITE
GANSI-RAB
Comdial strives to design the features in our communications systems to
be fully interactive with one another. However, this is not always possible,
as the combinations of accessories and features are too varied and extensive
to insure total feature compatibility....
Start reading Comdial Dxp Plus Instructions Manual

Related Manuals for Comdial Dxp Plus Instructions Manual

All Comdial manuals