Home > Comdial > Communications System > Comdial Dxp Plus Instructions Manual

Comdial Dxp Plus Instructions Manual

Here you can view all the pages of manual Comdial Dxp Plus Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 931

IMl66-123DXP Bhs Programming Ins trerctions
9.1Understanding Station Numbering
The system provides a maximum of 1000 intercom slots with 480 slots set up as personal intercom numbers. This
means that the system provides up to 520 group intercom numbers. All intercom numbers are four digits, and at
default, the system assigns blocks of intercom numbers in the following 
catagories:
1001-1480 = personal intercom numbers
400 l-4480,5000-5039 = group intercom numbers
5040-5999 = unassigned-used for...

Page 932

9.2Modifying Intercom NumbersDescription:
Use this programming procedure to modify intercom numbers and station names. A display
name is composed of a maximum of seven characters and shows in the display of an LCD
speakerphone as a identification aid. A full name is composed of a maximum of 20 characters
and shows in some voice mail and open architecture interface applications. You can compose a
valid name from any alpha-numeric character; however, the first character of a display name
must be an...

Page 933

/M/66-123DXP Plus Programming Instructions
9.3. IGrow Intercom AccessDescription:
Use this procedure to add group intercom numbers to stations for their use. Also refer to
Section 7.3 to map buttons for group intercom number selection.Programming:
1~ Press CONTROL T for main menu.
2. From main menu, select station and press ENTER.
3. From station menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name of station being programmed
and press ENTER.
5....

Page 934

DXP Plus Programming InstructionslM66-123
9.4Removing Intercom NumbersDescription:
Use this procedure to remove intercom numbers.
NOTE: If you remove or renumber an intercom number, be sure that you do not use the old
intercom number in button mapping, hunt lists, call forwarding and similar applications.Programming:
1. Press CONTROL T for the main menu.
2. From main menu, select intercom numbers and press ENTER.
3. From the intercom numbers menu, select remove intercoms and press ENTER.
4. Type intercom...

Page 935

Programming Call Costing and
Station Message- Detail
Accounting and Reports
fSMDA/SMDR Proaramminall 
SMDABMDRParameters................10.1l 
SMDAReports.....................10.2l Account Codes (Forced with Positive Verification)...
10.3l Emergency Numbers..................
10.4l Authorization Code...................
10.5
Call Costing and SMDAASMDR Programming 10-1 

Page 936

/M/66-123DXP Pius Programming Instructions
10.1SMDALSMDR Parameters
IO. 1. IDial Time LimitDescription.-Program the amount of time that the system ignores for dialing purposes 
e The system does not
cost dialing time when it records the time of a call for costing purposes. Refer to Section 12.5
for related call costing information.
Programming:
1. Press CONTROL T for main menu.
2. From the main menu, select 
SMDA/SMDR and press ENTER.
3. From 
SMDA/SMDR programming menu, select SMDBrISMDR parameters
and...

Page 937

IO. 1.4SMDR Record FormatDescription:Choose either a station message detail report (SMDR) format or a station message detailed
accounting (SMDA) format for the 
reportThis section (Section 10.1.4) and Section 10.2.1include examples of some typical reports for your reference.
The system presents each record in an 
80-column format and ends it with a carriage return/line
feed. Thefollowing chart details the formats for both SMDR and SMDA records.
Column
l-4
6-8
9-l 1
13-20
22-26
29-33
36-39
43-58
65-7...

Page 938

/M/66-123
SMDR Record Sample Shown In SMDA FormatDXP Plus 
Progfammhg fns tructions
09/23f2I27
09/2312:2s
09/2312:30
09/2312~28
09/2312~30
09/2312:17
09/2312:29
09/2312:31
09/2312:31
0912312~32
09/2312:31
09/2312~26
09/2312~32
09,2312:32
09/2312:28
09/2312~34
0912312:33
09/2312:20
09/2312:32
09/23X2:34163
175
117
194
154
139
188
154
143
188
203
144
154
154
154
154
184
140
161
2052.9
0.0
0*4
2.4
0.2
14.2
2.0
0.3
0.9
0,3
1.1
6.1
0.5
1.1
5.7
0.1
1.0
14.2
2.6
0.50.1
0.0
0.0
0.0
0.0
0.4
0.0
0.0
0.0
0.0
0.5...

Page 939

DXP Plus Programming Instructions/M/66-123
IO. 1.5Account Code (System Parameters)
Description:Account codes are used to identify calls by category or by any other desired grouping, so that
the system can record costing by that category. You can arrange the system to force the user to
enter an account code and have the system verify it before it allows the user to make a call. Turn
on the account code feature for the entire system using this procedure. Also, enable or disable
system verification of the...

Page 940

IMl66- 123DXP Plus Programming lnstruetions
10.1.7Account Code LengthDescription:An account code can be a minimum of three digits or a maximum of 16 digits. Use this
procedure to set the amount of account code digits. See Section 60.3 for further account code
programming details.
NOTE If you change the account code length you will delete
all currently programmed account codes.Programming:1 D Press CONTROL T for main menu.
2. From main menu, select 
SMDA/SMDR and press.
3. From 
SMDA/SMDR menu, select...
Start reading Comdial Dxp Plus Instructions Manual

Related Manuals for Comdial Dxp Plus Instructions Manual

All Comdial manuals