Comdial Dxp Plus Instructions Manual

DXP Plus Programming InstructionsMM-123E&M DNIS Line
Description:Dialed Number Identification Service (DNIS) is a Tl service feature for E&M lines. Long
distance carriers offer DNIS as a feature to dial 800 and dial 900 lines. DNIS identifies the
numbers that callers dial to reach an internal telephone system. Businesses served by a dial 800
or dial 
900 service allow calls to ring on any available line within an assigned block of lines and
then have their internal telephone system process the DNIS...

8.1.3Line DisableDescription:
Take a line port out of service because of defect or other reason using this programming choice.Programming:
1 D Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From line menu, select line programming and press ENTER.4. Type line port l-240 or previously assigned 
nameand press ENTER.
5.From line programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting.
7. When finished, press ESCAPE twice.
8....

8.1.6SMDR RecordDescription:
When you enable this feature, the system stores SMDR records for the specified line. Refer to
Section 10 for other SMDAISMDR programming considerations.Programming:
1. Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line programming and press ENTER.
4. Type line port number (l-240) or name and press ENTER.
5. From line programming, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting....

/M/66-123DXP Plus Programming fnstructions8.1.8
Pad Level-Transmit, Receive
(Gain And Attenuation Settings For Line Transmit And Receive)
Description:This feature enhances the Tl-El digital carrier transmission option, the pad level programming
feature adjusts voice levels for both the transmit and receive circuits in the individual channels.
The choices include: Gain 2, Gain 1, Nominal, Loss 1, Loss 2, Loss 3, Loss 4, and Loss 5.
These settings provide an approximate 
+6 to -15 dB range of choices....

8.1.9Dialing ModeDescription:Program the line port to match either a DTh4F tone or a rotary (pulse) dialing line as supplied
by the central office (CO).
Programming:1. Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line programming and press ENTER.
4. Type line port number (l-240) or name and press ENTER.
5. From line programming menu, type item number for feature and press ENTER.
6. Press SPACE bar for feature setting and press ENTER to accept...

8.1.10Abandon Hold ReleaseDescription:
When a distant party abandons a hold condition and his or her station disconnects from the line,
the central office sends a forward disconnect signal to the system. This signal is either 50 or
350 msec. in length. Use this procedure to program the line port to match the central officesignal length.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line programming and press ENTER.
4. Type line...

DXP Plus Programming Instructions/M/66-123
8.1.12 Toll Groups
Description:You must identify the individual lines that you do not want users to use when they dial toll
restricted numbers. Do this by first assigning the lines to toll groups and then assigning those
toll groups to the restricted number. There are 32 toll groups available for line assignment.
Assign one, several, or all lines to any desired toll group or combination of toll groups as
needed. 
See Section II for complete toll restriction...

/M/66-123DXP Plus Programming Instructions
8.1.15Disconnect SupervisionDescription:
When you enable this feature, the system detects a break in loop current anytime one occurs
during an outside call.Programming:
1 a Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line programming and press ENTER.
4. Type line port number (l-240) or name and press ENTER.
5. From line programming menu, type item number for feature and press ENTER.
6. Press SPACE...

8.1.17Voice Mail ID
Description:
Programming:
8.1.18DISA And DISA Voice Options
You can assign an identification number to each line so that the voice mail system can provide
customized call handling on a per line basis. Use voice mail system programming to match this
ID number to a particular personal directory or transaction box within the voice mail system.
When the DXP 
Plus routes a call that is ringing at a particular line to the voice mail system to
be answered, it routes it with the ID number....

8.2Line Group Programming
Description:Use this procedure to group similar type line ports together for dial-up access. Up to 16
different line groups are available. During operation, the system searches for an idle line in the
line group in the same order that you program them using this procedure.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select lines and press ENTER.
3. From lines menu, select line group programming and press ENTER.
4. Type line group number (1-16) and press...