Comdial Digital Telephone System Instructions Manual

System ProgrammingIM166-107
Direct Department Calling Configuration
0 To make a record of the programming configuration, mark the desired requirements in the direct department
calling class of service records chart found at the end of Chapter 4.
0 To make the programming selections, dial the feature code and then dial the configuration code (or press the
programming button where appropriate).
NOTE: A lighted LED next to the programming button for the selection indicates the current configuration.
When a...

IM166-107
System ProgrammingDirect Department Calling Configuration 
- continued
r1
Press ITCM *#746%.
Direct Department Calling - Station Pork1. Dial 53.“STATION FEATURES”
You can group stations by department to
2. Dial 19.“DEPT. CALLING ”
~llow a call to search for an idle station
3. Dial 1 - 4 for dept. 1 - 4. “DEPARTMENTX
within a department. This search occurs
4. Select department stations: - Station 10 - 57: Dial 10 - 57.
Nhen a busy or RNA is encountered at a
5. Dial t to program next department....

System ProgrammingIMl66-107
Direct Inward Station Dialing (DISD) Configuration
The DISD feature allows an external party to call an intercom station directly without assistance by the
attendant. The system must receive the 
DISD call on a line that you have programmed to allow this feature. You
can program any line to be a 
DISD line for both the normal mode of operation and the night transfer (of ringing)
mode of operation.
You can program the number of rings that the system will allow to occur on a...

IMl66-107System ProgrammingDirect Inward Station Dialing Configuration 
- continued
ND Assist Station1. Dial 46.“DISD ASSIST ”
Yhen a caller does not complete extension2. Choose operating mode to be programmed:
lumber dialing within the programmed dial
- Dial 1 or press Al = normal mode.
ime lit-hit, the system routes the call to the“DISD ASSIST DAY X ”
>ISD assist station.-OR-
- Dial 2 or press A2 = night transfer (of ringing) mode.
“D&D ASSIST NITE”
3. Select assist station.
- Dial 00 for no station...

System ProgrammingIMl66-107Data Printer Service Configuration
When you connect a data printer to the system, the system automatically prints the station message detail
record (SMDR) for the entire system without any programming or user intervention.
You call also command the data printer to print partial or complete printouts of the configuration data for the
system.While you are using the printer to print the configuration data or SMDA information, the system
temporarily halts the SMDR printout although...

IM166-107
System Programming
.
ExecuMaWEloquence Intetface Configuration
The digital telephone system supports the use of the ExecuMail voice mail equipment connected to the system’s
station ports through the Comdial ATI-D analog terminal interface device. The ATI-D is a multipurpose
on-premise accessory that has dual circuits to allow a e-port voice mail system to interface to two digital station
ports. Two ATI-D devices are needed to interface 
4-port voice mail systems. Refer to Comdial publication...

System ProgrammingIMl66-107
ExecuMaWEloquence Interface Configuration - Required Feature - continued
Press ITCM %#746+k
oice Mail Port - continued
‘ou must assign all voice mail ports to a
ircular hunt group to take advantage of
lat feature’s multiple-port interface
apability. Make a circular hunt group by
nking all voice mail ports to one another
.nd then linking the last voice mail port in
ie hunt group with the first voice mail port
I the hunt group. For example, with the
oice mail system connected...

IMl66-107System Programming
ExecuMaiVEloquence Interface Configuration - Optional Features
Automatic Transfer Of Voice Mail1. Dial 25“V MAIL AUTO XFER”
When you include a voice mail system with2. Press Al to toggle between enable and disable.
the digital telephone system, use this(LED On = Enable)
programming feature to arrange for an
-OR-
immediate line transfer without delay fromDial 
1 to enable.
the voice mail system to a digital station
(Al LED On)
port.Dial 2 to disable.
NOTE: Do not 
turn on this...

lMl66-107System Programming
Integrated Call Costing Configuration - continued
4. Area Code Band Table (Long Distance Calls)
The system compares the long distance calls that do not match entries in zone call band tables to entries that
you have made in area code band tables. Area code band tables are the 
tl&&&$y level of costing for long
distance calls. Area code band tables 1 
- 7 are associated with call rate costing tables 11 - 17. Use area code
band tables to cost calls based upon the area code of...