Home > Comdial > Communications System > Comdial Digital Telephone System Instructions Manual

Comdial Digital Telephone System Instructions Manual

Here you can view all the pages of manual Comdial Digital Telephone System Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 121

System ProgramingStation Configuration 
- Miscellaneous Features - continued
IM166-107
Press ITCM %#746%
dle Line Preference
Nhen you enable idle line preference, a
;tation will automatically connect to any
assigned and idle line that you have
lrogrammed for this purpose when the
lser takes the station off hook.
Interactive Buttons
The system supports the operation of
interactive buttons on all currently produced
Comdial proprietary LCD speakerphones.
interactive
buttons provide users with quick
easy...

Page 122

IMl66-107
System ProgramingStation Configuration 
- Miscellaneous Features - continued
Press ITCM %#746%
Intercom Hunt Group
You can link stations together to form
intercom hunt groups. Calls to a busy
station in a hunt group will search the group
for an idle station to ring.
1.Dial 53. “STATION FEATURES”
2.Dial 18. “ITCM HUNT LINK ’
3. Select first linking station.
- Station 10 - 57: Dial 10 - 57 or press Cl0 C57.-
4. Select second linking station
-Station 10 - 57: Dial 10 - 57 or press Cl 0 C57.-
5....

Page 123

System ProgramingStation 
Confinuration - Miscellaneous Features - continued
lMl66-107
Press ITCM %#746+&
Message Wait Originate
Any station that you program with this
feature can control the message waiting
light at other stations in the system. When
3 station user observes the message
waiting light turn on, he of she can press
ITCM HOLD to call the station that
controlled the light.
Ringing Line Preference
When you assign this feature to a station, it
will automatically answer a ringing line
when its...

Page 124

IMi66-107System ProgrammingStation Configuration 
- Miscellaneous Features - continued
jetting Subdued Off-Hook VoiceTo program from station 10,
hnounce (SOHVA) Tone Burst1. Press ITCM *#746%,“CONFIG. MODE ”
Wantities: Use this procedure to set the
2. Dial 17,“SYSTEM FEATURES ”
quantity of SOHVA tone bursts that sounds3. Dial 03,‘SOHVA TONES n ”
it stations to a choice of one through six.
4. Select the quantity of tone bursts,
- Dial 1 - 6 or press Al - A5, A8 (LED On = enabled)
5. Dial 
+N for...

Page 125

IMl66-107System ProgramingStation Configuration 
- Miscellaneous Features - continued
Press ITCM +K#746%
SOHVA Groups - continued
The system provides eight different
ixed-configuration SOHVA groups.
Service Observing
You can give selected stations the
zapability to monitor, in an un-announced
manner, an active call at another station.
NOTE: Since this feature requires the
executive override feature to
function, the system automatically
enables that feature for the station
when you enable servicing...

Page 126

System ProgramingStation Configuration 
- Miscellaneous Features - continued
IMl66-1071Press 
ITCM X#746% )
Station Names
You can assign individual names or
category names to stations. These names
will then be displayed by LCD
speakerphones when they are called by the
named stations. Typical names could be
TEC SER, MKT 1, J Smith.
System attendants also have access to this
station naming feature.1. Dial 66.“STATION NAMES 
”
2. Select station port (LED On = Selected):“xxxxxx ”
- Station 10 - 57: Dial 10 -...

Page 127

I. Dial 67 to reassign station to port.
‘ASSIGN 
STA/PORT ”
!. Dial station extension number. 0010 - 7999.
“PHYS PORTXX ”
3. Dial physical port number 10 - 57 or press Cl 0 - C57.
“LOGICAL STA XX ”
4. Dial # to make assignment.
5. Dial * for configuration mode.
To change setting, repeat procedure and make different selection.
IMl66-107System Programing
Station Configuration 
- Miscellaneous Features - continued
Press 
ITCM ++#746%
tation To Station Port Reassignment: You
an use this programming action to...

Page 128

System ProgramingIMl66-107
Station Configuration - Button Mapping (Non-Square System Configuration)
You can assign (map) every programmable button at each digital station to be line select buttons to provide
access to outside lines, to be direct station select (DSS) buttons to provide quick access to system stations, to
be special purpose buttons to provide telephone users one-button access to features, or to be idle buttons to
provide 
autodial locations for the station user.
Three Idle buttons serve as...

Page 129

IM166-107System ProgramingStation Configuration 
- Button Mapping - continued
Press ITCM 3#746%
3lank Buttons
3lank those buttons that you want to be
Dynamic line buttons or autodial buttons.
VOTE When blanking buttons, be 
sure a
previously assigned button is idle
(feature not selected by user) before
you blank it.
Zall Forward Button:
This button provides one-button forwarding
If all calls to another extension.
Call Park Orbit Button
The call park orbit button will automatically
park an active call in...

Page 130

System ProgramingIMl66-107Station Configuration 
- Button Mapping - continued
Press ITCM %#746+K
>SS/BLF Button
XS buttons provide quick access to
system stations and their lights and show
he busy status of the monitored stations.
Line Button
iine select buttons provide access to
outside lines.
Line Group Button
This button provides one-button access to
a line group.1. Dial 56.“BUTTON MAPPING 
”
2. Dial 03.“ASSIGN DSS/BLF ”
3. Select button to be programmed:
Press 
Al - A14, Bl - 86 (LED Winks =...
Start reading Comdial Digital Telephone System Instructions Manual

Related Manuals for Comdial Digital Telephone System Instructions Manual

All Comdial manuals