Comdial Digital Telephone System Instructions Manual

IM166-107System Programming
1Line Configuration - continued
Press ITCM W746+.
Use/Tone Switchable
f the installer has connected rotary dial
ines to the system, you must condition
hose line ports as pulse dial ports.
Iltemately, if the installer has connected
one dial lines to the system, you must
:ondition those line ports as tone dial ports.
The user can switch from pulse (rotary dial
SignaIling) to tone (dual tone multiple
‘requency - DTMF) for accessing special
zircuits requiring DTMF tones such as...

System ProgrammingIMl66-107Line Configuration 
- Block Programming
3lock Programming
lou can use this line configuration
rrocedure to assign those features that you
rave assigned to any one line (using the
Brocedures detailed on the previous pages)
o any other line or to an entire block of
ines.
Line Button Method
1. Dial 42.“BLK PROGRAMMING ’
2. Select model line port.“MODEL LINE XX ”
Line port l-l 4 = Press Al - Al 4
Line port 15,16 = Press Bl , B2
Line port 17-24 = Press HOLD then press Al - AS.
3....

System ProgramingStation Configuration
D To make a record of the programming configuration, mark the desired requirements in the station class of
service records chart found at the end of Chapter 4.
D To make the programming selections, dial the feature code and then dial the configuration code (or press the
programming button where appropriate).
VOTE: A lighted LED 
next to the programming button for the selection indicates the current configuration.When
a single button provides a 
foggle (on/off)...

IMl66-107System ProgramingStation Confiauration 
- Miscellaneous Features - continued
Press ITCM +##746#+
M-Call and Zone Paging
-elephone users can receive voice
Lnnouncements through their telephone
xrdspeakers, or through an external
baging amplifier and speaker connected toL
 PA port. They can transmit these voice
Lnnouncements with their telephone
landsets. You can arrange the
jrogramming so that the users can make
mnouncements to stations located in
:ertain areas of the site or to all of the...

System ProgramingIMl66-107Station Configuration 
- Miscellaneous Features - continued
I
Press 
ITCM f#746% 1
9udible Monitoring
The DSS/BLF at a multiline station provides
I visual indication of idle, busy and ringing
status of the monitored stations. You can
~lso provide audible indication of direct and
jelayed ringing for selected stations;
iowever, you must first enable the station
nonitoring feature on a system-wide basis.
Automatic Hold
When you enable this feature, the
telephone user can...

lM166-107System ProgramingStation Configuration 
- Miscellaneous Features - continued
Press ITCM S#746%
4utomatic Privacy/Privacy Release
fou can make a line private or non-private.
n the private mode, a station has exclusive
Jse of a line during a call. You can arrange
‘or individual stations to automatically
-elease privacy while on certain private
ines. With this arrangement, other stations
:an join that particular station whenever it is
>n the line that you have assigned as a
Drivacy release line....

System ProgramingIMl66-107Station Configuration 
- Miscellaneous Features - continued
Press ITCM %#746+#
Call Origination Denied
You can deny users of selected stations the
ability to originate calls on specified lines.
This feature does not prevent the user from
answering incoming calls on these lines.
Central Message Desk
Use this feature to designate one station in
the system as the central message desk.
When you do this, the system automatically
arranges for the central message desk
station to have...

IMl66-107
System ProgramingIStation Configuration 
- Miscellaneous Features - continued
I
(Press 
ITCM %#746t 1
Dual Console Feature
The dual console feature allow users to
have two 
DSS/BLF consoles to
complement one telephone.
Executive Override
You can provide selected stations with
busy override. This feature allows the
station to override a busy condition at a
station, sound a warning tone, and gain
access to the existing conversation.
To program station port for second-console feature,
1. Dial 53...

System ProgramingIM166-107Station Configuration 
- Miscellaneous Features - continued
Press 
ITCM X#746*
A
per station/per line basis. You can
ontrol ringing for every line that has
ppearance at a station assigning“DFLAY RING *
nmediate, or direct, ringing to some lines3. Select line ports for ringing (LED On = Selected Ports):
nd delayed ringing to others.
(For no ringing, skip this assignment and go to step 4.)
Line 
port 1-14 = Dial 01 - 14 or press Al - Al4
JOTE: Do not program direct ringhgLine port...

IM166-107System ProgramingStation Configuration 
- Miscellaneous Features - continued
Press ITCM +++#746%
Flexible Station Numbering
The system supports a flexible station
lumbering plan for calling individual
stations and departments. You can
)rogram each station port to respond to the
dialing of any available number between 10
and 7999; however, the system will not
allow you to assign the same dialing code
2s both a station extension number and a
department access code, nor will the
system .allow you...