Comdial Digital Telephone System Instructions Manual

System ProgrammingIMl66-107Video Display Terminal Programming Procedure 
- continued
Menu Descriptions 
- continued
0 Selection 2: Line group assignment
l Selection 3: Line dialing mode (pulse or tone to
match the connected line)
0 Selection 4: Line privacy release (releases privacy
on a line)
l Selection 5: Line toll restriction table assignment
0 Selection 6: Line abandoned hold release time
0 Selection 7: Set up a line (Using a model line)
(provides a means of programming a group of lines
to match the...

lM166-107System ProgrammingVideo Display Terminal Programming Procedure 
- continued
Menu Descriptions 
- continued
lFunctions that can be assigned are identified per
the following list:
To display list, enter ?.
Return to key mapping with 
Control Z.
BLKBlank
Lnn
Line (1 
- 24)
SnnStation (10 
- 57)
DND
Do Not DisturbPRI
Privacy
IC22nd Intercom
SAVSave
ACCAccount Code Button
ZPn
Zone Page (l-3)
ACAll Call
ACBAuto Callback
CF
Call Forward
CPnCall Park (l-9)
TGn
Line Group (l-4)
VABVoice Announce Block...

IMl66-107System Programming
Class; Of Service Configuration Records
The following pages provide you with a permanent record of the programming parameters. You
can copy these pages to provide a separate record to leave with the common equipment if you
wish.
4-87 

System ProgramminglMl66-107
System Configuration Records
System Configuration - Miscellaneous Features
utomatic Station RelocationEnable ) Disable
Default = disable
Data Baud Rate
10 BaudI
17-d&1/2 stop bits
.we Hold 1  Enable1 Disable
( Default = enabled 1
Extended DTMF Tones
For Automatic Dialinq
60 
msec
80 
msec
100 
msec
120 
msec
j60 msec
1240 msec
S20 msec
400 
msec
480 
msec
560 
msec
720 
msec
880 
msec
1040 
msec
Default = 80 msec.-I
Do Not Disturb Inhibit System-Wide 1 Enable( Disable
Do Not...

IMl66-107System ProgrammingSystem Configuration Miscellaneous 
Feat&es - continued
SOHVAToneBurstsl 11213141516
Default = 6
(TAB1 17~31) 

lM166-107
System Programming
System Configuration Records - continuedSystem Configuration 
- Miscellaneous Features - continued
116I1
 Default: 1= BACK AT, 2 i CALL
25 I150 I175 II
4-89 

IM166-107
System ProgrammingSystem Configuration Records 
- continued
System Configuration 
- Feature Inhibiting 

System ProgramminglMl66-107
no groups asgn’d., no names asgn’d,, all ports co, same line/port, all tone dialing, no VM ID.
FeatureOtt (Write:
Model Line Port
I
Block Programming
Start Line PortEnd Line PortI
4-92 

IMl66-107System Programming
Station Confiauration Records
(Use this sheet as an individual station record or as a record for a block of like-programmed stations. You can
make copies of this blank sheet as needed to meet the system capacity)4-93