Canon printer PIXMA iP110 User Manual

							1.
Roll up the paper in the opposite direction to the paper curl as shown below.
2.
Check that the paper is now flat.
We recommend printing curl-corrected paper one sheet at a time.
Note

						

							Reset the paper thickness lever to the right when you finish printing. If the paper thickness lever is not set back
to the right, the inside of the printer is more likely to get dirty due to the wider clearance between the print head
and the loaded paper. It may also reduce print quality.
Check5  If the intensity is set high, reduce the intensity setting and try printing again.
If you are using plain paper to print images with high intensity, the paper may absorb too much ink and become
wavy, causing paper abrasion.
Reduce the intensity setting in the printer driver and try printing again.
1.
Open the printer driver setup window.
How to Open the Printer Driver Setup Window
2.
On the  Main sheet, select  Manual for Color/Intensity , and then click Set....
3.
Drag the  Intensity slide bar on the  Color Adjustment  sheet to adjust the intensity.
Check6
 Is printing performed beyond the recommended printing area?
If you are printing beyond the recommended printing area of your printing paper, the lower edge of the paper
may become stained with ink.
Resize your original document in your application software.
Printing Area
Check7  Is the paper feed roller dirty?
Clean the paper feed roller.
Cleaning the Paper Feed Roller
Note

						

							Back of the Paper Is Smudged
Check1 Did you confirm the paper and print quality settings?
Print Results Not Satisfactory
Check2  Perform the Bottom Plate Cleaning to clean the inside of the printer.
Cleaning the Inside of the Printer (Bottom Plate Cleaning)
Note

						

							Colors Are Uneven or Streaked
 Colors Are Uneven
 Colors Are Streaked
Watch the movie
Check1 Did you confirm the paper and print quality settings?
Print Results Not Satisfactory
Check2  Print the Nozzle Check Pattern and perform any necessary maintenance
operations such as Print Head Cleaning.
Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles. Refer to 
When Printing Becomes Faint or Colors Are Incorrect  for the Nozzle Check Pattern printing, Print Head
Cleaning, and Print Head Deep Cleaning.

						

							Ink Is Not Ejected
Check1 Has the ink run out?
Open the print head cover, then check the status of ink lamp.
Checking the Ink Status
Check2  Are the print head nozzles clogged?
Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles. Refer to 
When Printing Becomes Faint or Colors Are Incorrect  for the Nozzle Check Pattern printing, Print Head
Cleaning, and Print Head Deep Cleaning.

						

							Problems with the Printer
The Printer Cannot Be Powered On
The Printer Turns Off Unintentionally
Cannot Connect to Computer with a USB Cable Properly
Cannot Communicate with the Printer with USB Connection
Print Head Holder Does Not Move to the Position for Replacing
Printer Status Monitor Is Not Displayed
457 
						

							The Printer Cannot Be Powered On
Check1 Press the  ON button.
Check2
 Make sure that the power plug is securely plugged into the power cord
connector of the printer, then turn it back on.
Check3  Unplug the printer from the power supply, then plug the printer back in and turn
the printer back on after leaving it for at least 2 minutes.
Check4  If you use a battery, check the remaining level of the battery.
For details on how to check it, refer to the battery's instruction manual. If the battery is running out, replace the battery with a charged one, or connect the AC adapter to the printer.
If the problem is not resolved, contact the service center.
458 
						

							The Printer Turns Off Unintentionally
Check Deactivate the setting to turn the unit off automatically.
The printer turns off automatically according to the elapsed time you specified if you activate the setting to turn
the unit off automatically.
If you do not want the printer to turn off automatically, open the printer driver setup window and in  Auto Power
under the  Maintenance  sheet, select  Disable for Using AC Adapter  in Auto Power Off .
459 
						

							Cannot Connect to Computer with a USB Cable ProperlyPrinting Speed Is Slow/Hi-Speed USB Connection Does Not Work/"This
device can perform faster" Message Is Displayed
If your system environment is not fully compatible with Hi-Speed USB, the printer will operate at a lower
speed provided under USB 1.1. In this case, the printer operates properly but printing speed may slow
down due to communication speed.
Check  Check the following to make sure that your system environment supports Hi-
Speed USB connection.