Home > Canon > Printer > Canon printer PIXMA iP110 User Manual

Canon printer PIXMA iP110 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA iP110 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 544
    							Paper SizeSpecifies the  Width and the  Height of the custom paper. Measurement is shown according to the
    units specified in  Units.
    Related Topics
    Printing with Easy Setup
    Setting a Page Size and Orientation
    Setting the Number of Copies and Printing Order
    Execute Borderless Printing
    Duplex Printing
    Setting Up Envelope Printing
    Printing on Postcards
    Displaying the Print Results before Printing
    Setting Paper Dimensions (Custom Size)
    Printing a Color Document in Monochrome
    Specifying Color Correction
    Adjusting Color Balance
    Adjusting Color Balance Using Sample Patterns (Printer Driver)
    Adjusting Brightness
    Adjusting Intensity
    Adjusting Contrast
    Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
    Registering a Frequently Used Printing Profile
    361 
    						
    							Main tab DescriptionThe  Main  tab allows you to create a basic print setup in accordance with the media type. Unless special
    printing is required, normal printing can be performed just by setting the items on this tab.
    Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper.
    You can check an overall image of the layout.
    Media Type Selects a type of printing paper.
    Select a media type that matches the paper that is loaded in the printer. This ensures that printing is
    carried out properly for the specified paper.
    Paper Source Shows the source from which paper is supplied.
    Rear Tray Paper is always supplied from the rear tray.
    Print Quality Selects your desired printing quality.
    Select one of the following to set the print quality level that is appropriate for the purpose.
    Important
    
    						
    							CustomSelect this when you want to set the printing quality level individually.
    Set... Select  Custom  for Print Quality  to enable this button.
    Open the 
    Custom dialog box . You can then individually set the print quality level.
    Color/Intensity Selects color adjustment method.
    Auto Cyan , Magenta , Yellow , Brightness , Intensity , and Contrast , and so on are adjusted
    automatically.
    Manual Select when you set the individual settings such as  Cyan, Magenta , Yellow , Brightness ,
    Intensity , and Contrast , etc. and  Color Correction  method.
    Set... Select  Manual  for Color/Intensity  to enable this button.
    In the  Manual Color Adjustment  dialog box, you can adjust individual color settings such as
    Cyan , Magenta , Yellow , Brightness , Intensity , and Contrast  on the 
    Color Adjustment tab, and
    select the  Color Correction  method on the 
    Matching tab.
    Note
    
    						
    							ContrastAdjusts the contrast between light and dark in the image to be printed.
    Moving the slider to the right increases the contrast, moving the slider to the left decreases the
    contrast.
    You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
    Print a pattern for color adjustment When the color balance or intensity/contrast is changed, the pattern printing function prints a list of
    the adjustment results along with the adjustment values.
    Select this function when printing a pattern for color adjustment.
    Pattern Print preferences... Check  Print a pattern for color adjustment  to enable this button.
    The 
    Pattern Print dialog box  opens and allows you to set pattern printing settings.
    Pattern Print dialog box
    Performs the setup for printing of patterns that allow you to check the color balance and intensity/ contrast of documents.
    Parameters to Adjust Select the item to be checked by pattern printing.Cyan/Magenta/Yellow Prints a pattern that allows you to check the cyan/magenta/yellow balance.
    Important
    
    						
    							LargeCyan/Magenta/Yellow  19
    Intensity/Contrast  25
    Small Cyan/Magenta/Yellow  7
    Intensity/Contrast  9
    Color Variation Between Instances Sets the amount of color change between neighboring patterns.Select from  Large, Medium , and Small . Large  produces a large amount of change, and  Small
    produces a small amount of change.
    Note
    
    						
    							Note
    						
    							Page Setup tab DescriptionThe  Page Setup  tab allows you to determine how a document is to be arranged on the paper. Also, this tab
    allows you to set the number of copies and the order of printing. If the application which created the
    document has a similar function, set them with the application.
    Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper.
    You can check an overall image of the layout.
    Page Size Selects a page size.
    Ensure that you select the same page size as you selected within the application.
    If you select  Custom..., the 
    Custom Paper Size dialog box  opens and allows you to specify any
    vertical and horizontal dimensions for the paper size.
    Orientation Selects the printing orientation.
    If the application used to create your document has a similar function, select the same orientation that
    you selected in that application.
    Portrait Prints the document so that its top and bottom positions are unchanged relative to the paper feed
    direction. This is the default setting.
    Landscape Prints the document by rotating it 90 degrees relative to the paper feed direction.
    You can change the rotation direction by going to the  Maintenance tab, opening the  Custom
    Settings  dialog box, and then using  Rotate 90 degrees left when orientation is [Landscape@
    check box.
    To rotate the document 90 degrees to the left when printing, select the  Rotate 90 degrees left
    when orientation is [Landscape@  check box.
    368 
    						
    							Rotate 180 degreesPrints the document by rotating it 180 degrees against the paper feed direction.
    The width of print area and the amount of extension that are configured in other application software will
    be reversed vertically and horizontally.
    Printer Paper Size Selects the size of paper actually loaded into the printer.
    The default setting is  Same as Page Size to perform normal-sized printing.
    You can select a printer paper size when you select  Fit-to-Page, Scaled , Page Layout , Tiling/Poster ,
    or  Booklet  for Page Layout .
    If you select a paper size that is smaller than the  Page Size, the document size will be reduced. If you
    select a paper size that is larger, the document size will be enlarged.
    Also if you select  Custom..., the 
    Custom Paper Size dialog box  opens and allows you to specify any
    vertical and horizontal dimensions for the paper size.
    Page Layout Selects the size of the document you want to print and the type of printing.Normal-size This is the normal printing method. Select this when you do not specify any page layout.
    Automatically reduce large document that the printer cannot output If the printer cannot print the paper size of a document, the printer can automatically reduce
    the size when it prints the document.
    Check this check box to reduce the size when printing the document.
    Borderless Chooses whether you are printing on a full page without any page margins or printing with page
    margins.
    In borderless printing, originals are enlarged to extend slightly off the paper. Thus, printing can be
    performed without any margins (border).
    Use  Amount of Extension  to adjust how much of the document extends off the paper during
    borderless printing.
    Amount of Extension Adjusts how much of the document extends off the paper during borderless printing.
    Moving the slider to the right increases the amount of extension and allows you to perform
    borderless printing with no problems.
    Moving the slider to the left reduces the amount of extension and expands the range of the document to print.
    Fit-to-Page This function enables you to automatically enlarge or reduce documents to fit to the paper size
    loaded in the printer without changing the paper size you specified in your application software.
    Scaled Documents can be enlarged or reduced to be printed.Specify the size in  Printer Paper Size , or enter the scaling ratio in the  Scaling box.
    Scaling Specifies an enlargement or reduction ratio for the document you want to print.
    Page Layout Multiple pages of document can be printed on one sheet of paper.Specify... Opens the 
    Page Layout Printing dialog box .
    Click this button to set details on page layout printing.
    369 
    						
    							Tiling/PosterThis function enables you to enlarge the image data and divide the enlarged data into severalpages to be printed. You can also glue together these sheets of paper to create large printed
    matter, such as a poster.
    Specify... Opens the 
    Tiling/Poster Printing dialog box .
    Click this button to set details on tiling/poster printing.
    Booklet The booklet printing function allows you to print data for a booklet. Data is printed on both sides of
    the paper. This type of printing ensures that pages can be collated properly, in page number order,
    when the printed sheets are folded and stapled at the center.
    Specify... Opens the 
    Booklet Printing dialog box .
    Click this button to set details on booklet printing.
    Duplex Printing (Manual) Select whether to print the document to both sides of the paper manually or to one side of the paper.
    Check this check box to print the document on both sides.
    This function can be used only when  Plain Paper is selected for  Media Type and one of Normal-size ,
    Fit-to-Page , Scaled , or Page Layout  is selected.
    Stapling Side Selects the stapling margin position.
    The printer analyzes the  Orientation and Page Layout  settings, and automatically selects the best
    stapling margin position. Check  Stapling Side, and select from the list to change it.
    Specify Margin... Opens the 
    Specify Margin dialog box .
    You can specify the width of the margin.
    Copies Specifies the number of copies you want to print. You can specify a value from 1 to 999.
    Important
    
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA iP110 User Manual