Home > Canon > Printer > Canon printer PIXMA iP110 User Manual

Canon printer PIXMA iP110 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA iP110 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 544
    							Cleaning the Print HeadClean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle checkpattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head
    consumes ink, so clean the print head only when necessary.1.
    Make sure that the power is turned on.
    2.
    Hold down the  RESUME/CANCEL  button until the POWER lamp flashes once, then
    release it immediately.
    The printer starts cleaning the print head. The cleaning will be complete when the  POWER lamp lights after flashing.
    Do not perform any other operations until the printer completes the cleaning of the print head. This takes
    about 1 to 2 minutes.
    3.
    Check the print head condition.
    Print the nozzle check pattern  to check the print head condition.
    Note
    
    						
    							Aligning the Print HeadIf printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print headposition.
    Note
    
    						
    							Performing Maintenance from a Computer
    Cleaning the Print Heads from Your Computer
    Cleaning the Paper Feed Rollers from Your Computer
    Aligning the Print Head
    Aligning the Print Head Position from Your Computer
    Use Your Computer to Print a Nozzle Check Pattern
    Cleaning Inside the Printer
    143 
    						
    							Cleaning the Print Heads from Your ComputerThe print head cleaning function allows you to clear up clogged print head nozzle. Perform print head
    cleaning if printing is faint or a specific color fails to print, even though there is enough ink.
    The procedure for cleaning the print head is as follows:
     Cleaning
    1.
    Open the printer driver setup window
    2.
    Click  Cleaning  on the Maintenance  tab
    When the  Print Head Cleaning  dialog box opens, select the ink group for which cleaning is to be
    performed.
    Click  Initial Check Items  to display the items you need to check before performing cleaning.
    3.
    Execute cleaning
    Make sure that the printer is on and then click  Execute.
    Print head cleaning starts.
    4.
    Complete cleaning
    The  Nozzle Check  dialog box opens after the confirmation message.
    5.
    Check the results
    To check whether the print quality has improved, click  Print Check Pattern. To cancel the check
    process, click  Cancel.
    If cleaning the head once does not resolve the print head problem, clean it once more.
    Important
    
    						
    							When the Deep Cleaning  dialog box opens, select the ink group for which deep cleaning is to be
    performed.
    Click  Initial Check Items  to display the items you need to check before performing deep cleaning.3.
    Execute deep cleaning
    Make sure that the printer is on and then click  Execute.
    Click  OK when the confirmation message appears.
    Print head deep cleaning starts.
    4.
    Complete deep cleaning
    The  Nozzle Check  dialog box opens after the confirmation message.
    5.
    Check the results
    To check whether the print quality has improved, click  Print Check Pattern. To cancel the check
    process, click  Cancel.
    Important
    
    						
    							Cleaning the Paper Feed Rollers from Your ComputerCleans the paper feed rollers. Perform feed roller cleaning when there are paper particles sticking to the
    paper feed rollers and paper is not fed properly.
    The procedure for performing the feed roller cleaning is as follows:
     Roller Cleaning
    1.
    Prepare the printer
    Remove all sheets of paper from the rear tray, and set the paper thickness lever to the right.
    2.
    Open the printer driver setup window
    3.
    Click  Roller Cleaning  on the Maintenance  tab
    The confirmation message appears.
    4.
    Execute paper feed roller cleaning
    Make sure that the printer is on and then click  OK.
    Paper feed roller cleaning starts.
    5.
    Complete paper feed roller cleaning
    After the rollers have stopped, follow the instruction in the message, load three sheets of plain paper
    into the rear tray, and click  OK.
    Paper will be ejected and feed roller cleaning will be completed.
    146 
    						
    							Aligning the Print HeadWhen you perform head position adjustment, errors in the print head adjustment position are corrected and
    conditions such as color and line streaking are improved. If the print results appear uneven because of line shifts or other conditions, adjust the position of the print
    head.
    On this printer, you can adjust the print head either 
    automatically  or manually.
    147 
    						
    							Aligning the Print Head Position from Your ComputerPrint head alignment corrects the installation positions of the print head and improves deviated colors and
    lines.
    This printer supports two head alignment methods: automatic head alignment and manual head alignment.
    Normally, the printer is set for automatic head alignment.
    If the printing results of automatic print head alignment are not satisfactory, 
    perform manual head alignment .
    The procedure for performing automatic print head alignment is as follows:
     Print Head Alignment
    1.
    Open the printer driver setup window
    2.
    Click  Print Head Alignment  on the Maintenance  tab
    The  Start Print Head Alignment  dialog box opens.
    3.
    Set the paper thickness lever to the right, and load paper in the printer
    Load one sheet of A4 size or Letter size Matte Photo Paper (MP-101) into the rear tray.
    Note
    
    						
    							Aligning the Print Head Position Manually from Your ComputerPrint head alignment corrects the installation positions of the print head and improves deviated colors and
    lines.
    This printer supports two head alignment methods: 
    automatic head alignment  and manual head alignment.
    Normally, the printer is set for automatic head alignment. If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.
    The procedure for performing manual print head alignment is as follows:
     Print Head Alignment
    1.
    Open the printer driver setup window
    2.
    Click  Custom Settings  on the Maintenance  tab
    The  Custom Settings  dialog box opens.
    Note
    
    						
    							Enter the numbers of the patterns with the least noticeable streaks in the associated boxes.Even if the patterns with the least noticeable streaks are clicked in the preview window, their numbers are automatically entered in the associated boxes.
    When you have entered all the necessary values, click  OK.
    Note
    
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA iP110 User Manual