Canon printer PIXMA iP110 User Manual

							Universal AC Adapter
						

							Regulatory and Safety InformationFor models containing lithium battery
						

							Users in Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and
meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and
operated keeping the radiator at least 20cm or more away from person's body (excluding extremities: hands, wrists, feet and ankles).
Pour les usagers rpsidant au Canada
Le prpsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorispe aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioplectrique subi, mrme si le brouillage est susceptible d'en compromettre le fonctionnement.
Cet pquipement est conforme aux limites d'exposition aux rayonnements pnoncpes pour un
environnement non contr{lp et respecte les rqgles d'exposition aux frpquences radioplectriques (RF)
CNR-102 de l'IC. Cet pquipement doit rtre installp et utilisp en gardant une distance de 20 cm ou plus
entre le dispositif rayonnant et le corps (j l'exception des extrpmitps : mains, poignets, pieds et chevilles).
Users in Jordan
This printer contains WLAN Module approved by TRC/LPD/2013/130
Name of WLAN Module : K30357
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
These symbols indicate that this product is not to be disposed of with your household waste, according tothe WEEE Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation
implementing those Directives. If a chemical symbol is printed beneath the symbol shown above, in
accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium,
Pb = Lead) is present in this battery or accumulator at a concentration above an applicable threshold
specified in the Battery Directive. This product should be handed over to a designated collection point,
e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic equipment (EEE) and batteries and
accumulators. Improper handling of this type of waste could have a possible impact on the environment
and human health due to potentially hazardous substances that are generally associated with EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural
resources. For more information about the recycling of this product, please contact your local city office,
waste authority, approved scheme or your household waste disposal service or visit www.canon-
europe.com/weee, or www.canon-europe.com/battery.
93 
						

							Korisnici u Srbiji
Ovaj simbol ozna
						

							time or not at all.
Canon does not recommend extending the Activation Times from the optimum ones set as default.
Energy Star 
						

							Main Components and Basic Operations
Main Components
About the Power Supply of the Printer
96 
						

							Main Components
Front View
Rear View
Side View
Inside View
97 
						

							Front View
(1) print head coverOpen to replace an ink tank or remove jammed paper inside the printer.
(2) paper guide Align with the left side of the paper stack.
(3) paper support Pull out fully to support paper loaded on the rear tray.
(4) rear tray cover Open to load paper in the rear tray.
(5) rear tray Load paper here. Two or more sheets of the same size and type of paper can be loaded at the sametime, and fed automatically one sheet at a time.
Loading Plain Paper / Photo Paper
Loading Envelopes
(6) paper output slot cover Printed paper is ejected.
(7) paper thickness lever Switches the clearance between the print head and the loaded paper to match the media type.
Set to the left when printing on envelopes.
Set to the right when printing on paper other than envelopes.
98 
						

							* All lamps are shown lit in the above figure for explanatory purposes.(8) ON button Turns the power on or off.
Turning the Printer On and Off
(9) POWER lamp Lights after flashing when the power is turned on.
Note

						

							Rear View
(1) battery connectorConnects the battery.
For how to connect and use the battery, refer to the battery's instruction manual.
(2) battery connector cover Covers the battery connector. When the battery is unplugged from the connector, use this cover to
protect the battery connector.
100