Canon printer PIXMA iP110 User Manual

							Tiling/Poster PrintingThe tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print
these pages on separate sheets of paper. You can also paste the pages together to create a large print like
a poster.
The procedure for performing tiling/poster printing is as follows:
Setting Tiling/Poster Printing
1.
Open the printer driver setup window
2.
Set tiling/poster printing
Select  Tiling/Poster  from the Page Layout  list on the Page Setup  tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3.
Select the print paper size
Select the size of the paper loaded in the printer from the  Printer Paper Size list.
4.
Set the number of image divisions and the pages to be printed
291 
						

							If necessary, click Specify..., specify the following settings in the  Tiling/Poster Printing dialog box,
and then click  OK.
Image Divisions
Select the number of divisions (vertical x horizontal).As the number of divisions increases, the number of sheets used for printing increases. If you are
pasting pages together to create a poster, increasing the number of divisions allows you to create
a larger poster.
Print "Cut/Paste" in margins To leave out words "Cut" and "Paste", uncheck this check box.
Note

						

							Note

						

							Booklet PrintingThe booklet printing function allows you to print data for a booklet. Data is printed on both sides of the
paper. This type of printing ensures that pages can be collated properly, in page number order, when the
printed sheets are folded and stapled at the center.
The procedure for performing booklet printing is as follows:
1.
Open the printer driver setup window
2.
Set booklet printing
Select  Booklet  from the  Page Layout  list on the Page Setup  tab.
The current settings are displayed in the settings preview on the left side of the window.
3.
Select the print paper size
Select the size of the paper loaded in the printer from the  Printer Paper Size list.
4.
Set the margin for stapling and the margin width
Click  Specify...  and specify the following settings in the  Booklet Printing dialog box, and then click  OK.
294 
						

							Margin for staplingSelect which side should the stapling margin be on when the booklet is completed.
Insert blank page To leave one side of a sheet blank, check the check box, and select the page to be left blank.
Margin Enter the margin width. The specified width from the center of the sheet becomes the margin width
for one page.
Page Border To print a page border around each document page, check the check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the document will be printed on one side of a sheet of paper. When the printing of one side is complete, set the paper correctly by following the message and click  OK.
When the printing of the other side is complete, fold the paper at the center of the margin and make a
booklet.
Important

						

							Duplex Printing
The procedure for printing data on both sides of a sheet of paper is as follows:
You can also set duplex printing in  Additional Features on the Quick Setup  tab.
1.
Open the printer driver setup window
2.
Set duplex printing
Check the  Duplex Printing (Manual)  check box on the Page Setup tab.
3.
Select the layout
Select  Normal-size , Fit-to-Page , Scaled , or Page Layout  from the Page Layout  list.
4.
Specify the side to be stapled
The best  Stapling Side  is selected automatically from the  Orientation and Page Layout  settings. To
change the setting, select another stapling side from the list.
5.
Set the margin width
If necessary, click  Specify Margin... and set the margin width, and then click  OK.
6.
Complete the setup
296 
						

							Click OK on the  Page Setup  tab.
When you execute print, the document is first printed on one side of a sheet of paper. After one side is
printed, reload the paper correctly according to the message. Then click  Start Printing  to print the opposite side.
Important

						

							Stamp/Background PrintingStamp  or Background  may be unavailable when certain printer drivers or operating environments are used.
The  Stamp  function allows you to print a stamp text or a bitmap over or behind document data. It also
allows you to print date, time and user name. The  Background function allows you to print a light illustration
behind the document data.
The procedure for performing stamp/background printing is as follows:
Printing a Stamp
"CONFIDENTIAL," "IMPORTANT," and other stamps that are used often in companies are pre-registered.1.
Open the printer driver setup window
2.
Click  Stamp/Background...  (Stamp... ) on the Page Setup  tab
The Stamp/Background  (Stamp ) dialog box opens.
Note

						

							3.Select a stamp
Check the  Stamp check box, and select the stamp to be used from the list.
The current settings are displayed in the settings preview on the left side of the  Page Setup tab.4.
Set the stamp details
If necessary, specify the following settings, and then click  OK.
Define Stamp... button To 
change the stamp text, bitmap, or position , click this.
Place stamp over text To print the stamp on the front of the document, check this check box.
Note

						

							Select Background... buttonTo 
use another background or change the layout or density of a background , click this.
Background first page only To print the background only on the first page, check this check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the data is printed with the specified background.
Important