Canon printer PIXMA iP110 User Manual

							If an error message is displayed even though the same size that was set is loaded, clear the
check box.
Ink Drying Wait Time You can set the length of the printer rest time until printing of the next page begins. Moving the
slider to the right increases the pause time, and moving the slider to the left decreases the time. If the paper gets stained because the next page is ejected before the ink on the printed page
dries, increase the ink drying wait time. Reducing the ink drying wait time speeds up printing.4.
Apply the settings
Click  OK and when the confirmation message appears, click  OK.
The printer operates with the modified settings hereafter.
171 
						

							Connecting Computer or Smartphone to Printer Directly viaWireless LAN (Access Point Mode)
The printer has a function to connect a computer or smartphone to the printer directly via wireless LAN,
allowing you to perform printing operation. Follow the procedure below to use this function.1.
Change printer setting.
2.
Connect computer or smartphone to printer.
3.
Perform printing operation.
For more on printing operation, refer to device's or application's instruction manual.
Important

						

							Initializing the Printer SettingsYou can initialize the printer settings.
Important

						

							Disabling the Wireless LAN Function of the PrinterFollow the procedure below to disable the wireless LAN.1.
Make sure that the printer is turned on.
2.
Press and hold the  RESUME/CANCEL  button then release the button when the  POWER
lamp flashes 12 times.
The  Wi-Fi  lamp goes off.
Note

						

							Setting the Ink Usage ControlThe ink usage control function allows you to reduce black ink consumption and to produce the black
sections with color inks when printing to plain paper from a computer.
Reducing Black Ink Consumption
Producing the Black Sections with Color Inks
Important

						

							- When Custom  is selected for  Print Quality and 2 or  3 is selected for  Quality at the Custom  dialog
box
						

							Information about Network Connection
Useful Information about Network Connection
178 
						

							Useful Information about Network Connection
Default Values Set at Factory (Network)
Connecting the Printer to the Computer Using a USB Cable
When Detecting the Printers Have the Same Name during Setup
Connecting to Other Computer with LAN/Changing the Connection Method
from USB to LAN
Printing Out Network Setting Information
179 
						

							Default Values Set at Factory (Network)Default Values of the LAN ConnectionItemThe defaultEnable/disable LANEnableSSIDBJNPSETUPCommunication modeInfrastructureWireless LAN securityDisableIPv4 IP addressAuto setupIPv6 IP addressAuto setupSet printer name*XXXXXXXXXXXXEnable/disable IPv6EnableEnable/disable WSD (WSD settings)EnableTimeout setting (WSD settings)1 minuteEnable/disable Bonjour (Bonjour settings)EnableService name (Bonjour settings)Canon iP110 seriesLPR protocol settingEnablePictBridge communicationEnableWireless LAN DRXEnable
(* The default value in this item varies by the printer.)
Default Values of the Access Point Mode
ItemThe defaultSSID (access point name) *1XXXXXX-iP110seriesSecurity settingWPA2-PSK (AES)Password *2XXXXXXXX
*1 "XXXXXX" is the last six digits of MAC address of the printer.
*2 The default value in this item varies by the printer.
180