Home > Canon > Printer > Canon printer PIXMA iP110 User Manual

Canon printer PIXMA iP110 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA iP110 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 544
    							Changing the WEP Detailed Settings
    Note
    
    						
    							2.Key Length:
    Select either  64bit or 128bit .3.
    Key Format:
    Select either  ASCII or Hex .
    4.
    Key ID:
    Select the Key ID (index) set to the access point.
    5.
    Authentication:
    Select the authentication method to authenticate the printer's access to the access point. Normally, select  Auto. If you want to specify the method manually, select  Open System or
    Shared Key  according to the setting of the access point.
    7.
    Click OK.
    Important
    
    						
    							Changing the WPA/WPA2 Detailed Settings
    Note
    
    						
    							8.
    Enter the passphrase, then click Next>.
    Enter the passphrase set to the access point. The passphrase should be a string of 8 to 63 alphanumeric
    characters or a 64-digit hexadecimal value.
    If you do not know the access point passphrase, refer to the instruction manual provided with the access point or contact its manufacturer.
    The dynamic encryption method is selected from either TKIP (basic encryption) or AES (secure
    encryption) automatically.
    Important
    
    						
    							Important
    
    						
    							Changing the Settings in the Wired LAN Sheet
    Note
    
    						
    							Changing the Settings in the Admin Password Sheet
    Note
    
    						
    							Monitoring Wireless Network Status
    Note
    
    						
    							6.Check the status.
    When the measurement is complete, the status is displayed.
    When  is displayed in  Connection Performance between the Printer and the Access Point: , the
    printer can communicate with the access point. Otherwise, refer to displayed comments and the following to improve the status of communication link, and click  Remeasurement.
    
    						
    							If  still appears even if you have tried the above, finish the measurement, then restart the IJ Network
    Tool to start over the measurement.7.
    Click  Finish .
    Note
    
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA iP110 User Manual