Home > Canon > Printer > Canon printer FAXPHONE L80 User Manual

Canon printer FAXPHONE L80 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer FAXPHONE L80 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Chapter 10 Copying10-1
    Copying
    Chapter 10
    Copying
    This chapter describes how to make copies with your machine.
    Documents You Can Copy.....................................................................10-2
    Making Copies........................................................................................10-2 
    						
    							10-2Copying Chapter 10
    Documents You Can Copy
    For information on the types of documents you can copy, their requirements, and details
    on loading documents, see Chapter 4.
    Making Copies
    Follow this procedure to make copies:
    1Adjust the paper delivery selector if
    necessary (1
    p. 5-7).
    2Load the document, face down in the 
    ADF (1
    p. 4-3).
    •To adjust the contrast, see p. 7-3.(Currently used memory)
    (Standby to scan)
    3Press Start/Copy.
    4Press Image Qualityrepeatedly until 
    the resolution setting you want is
    displayed.
    •You can select from the following:
    –
    TEXT
    Suitable for most text documents.
    –
    PHOTO
    Suitable for documents that contain
    photographs.
    5To make a reduced copy of your 
    document, use ∂
    or ¨to select the 
    reduction percentage you want.
    •You can select from the following:
    –
    70%
    –80%
    –90%
    –100%COPY     80%   01
    PHOTO
    COPY    100%   01
    DOCUMENT READY
    MEMORY USED 0% 
    						
    							Chapter 10 Copying10-3
    Copying
    6If you want to make multiple copies, 
    use the numeric buttons to enter the
    number of copies.
    •You can make up to 99 copies.
    n
    The machine copies at 400 ×300
    dpi for single copies, and at 200 
    ×
    300 dpi for multiple copies. For
    best quality output, make one copy
    at a time.
    7Press Start/Copyto begin copying.
    •To cancel copying, press Stop/Reset.
    You may then need to open the
    operation panel to remove the document
    from the ADF (1
    p.13-2).
    n
    You will be unable to make multiple copies if MEMORY FULLappears in the LCD. Print,
    send, or delete any documents you no longer need to be stored in the machine’s
    memory (1
    p.9-4), then start again. Also, if you are copying multiple pages with many
    graphics, separate the pages into smaller stacks or make the desired number of copies
    one at a time as needed.
    COPYING
    COPY     80%   05 
    						
    							Chapter 11 Reports and Lists11-1
    Reports and Lists
    Chapter 11
    Reports and Lists
    This chapter describes the different reports and lists you can print from your machine.
    You will find samples of some of these reports and instructions for printing.
    Summary of Reports and Lists.............................................................11-2
    ACTIVITY REPORT.................................................................................11-3
    TX (Transmission) REPORT..................................................................11-4
    MULTI TX/RX (Transaction) REPORT ..................................................11-5
    RX (Reception) REPORT........................................................................11-5 
    						
    							11-2Reports and Lists Chapter 11
    Summary of Reports and Lists
    The table below shows the lists and reports that can be printed from your machine.
    Refer to the pages indicated for more details.
    Report or List
    USER’S DATA LIST
    ACTIVITY REPORT
    TX (Transmission) REPORT
    RX (Reception) REPORT
    MULTI TX/RX (Transaction)
    REPORT
    DOC. MEMORY LIST
    MEMORY CLEAR REPORT
    1-TOUCH SPD DIAL LIST 1
    1-TOUCH SPD DIAL LIST 2
    CODED SPEED DIAL LIST 1
    CODED SPEED DIAL LIST 2
    GROUP DIAL LIST
    Description
    Lists the current settings of your machine and
    the registered sender information.
    Shows recent facsimile transactions performed
    by your machine.
    You can enable or disable automatic printing 
    of this report after every 20 transactions. You
    can also manually set the machine to print it.
    Prints after transmission of a document.
    You can enable or disable this feature, or set
    the machine to print a report only when an
    error occurs.
    You can also set the machine to print the first
    page of the document under the report to
    remind you of the contents of the document.
    Prints after reception of a document.
    You can enable or disable this feature, or set 
    the machine to print a report only when an
    error occurs.
    Prints after sending the same document to
    several fax numbers, or after polling multiple
    fax numbers in one operation.
    Lists the documents currently stored in the
    machine’s memory.
    Prints automatically when power is restored 
    to the machine after a power failure. Lists the
    documents deleted from memory.
    Lists the numbers and names registered 
    under one-touch speed dialing buttons.
    Lists the numbers and names registered 
    under coded speed dialing codes.
    Lists groups registered under one-touch 
    speed dialing buttons and coded speed 
    dialing codes.
    Details
    p.14-2
    p.11-3
    p.14-5
    p.11-4
    p.14-5
    p.11-5
    p.14-5
    p.11-5
    p.9-4
    p.13-21
    p.6-20
    p.6-21
    p.6-22 
    						
    							Chapter 11 Reports and Lists11-3
    Reports and Lists
    ACTIVITY REPORT
    The machine is factory-set to automatically print an ACTIVITY REPORT after every 20
    transactions. If you want to print an ACTIVITY REPORT before it is automatically
    printed, follow this procedure:
    1Press Function.
    2Press Report.
    3Press Set.
    •The machine prints an ACTIVITY
    REPORT.
    Transactions in an ACTIVITY REPORT are listed chronologically.
    Sending transactions are numbered between 0001 and 4999, and receiving
    transactions are numbered between 5001 and 9999. When 4999 and 9999 are reached
    respectively, numbering reverts to 0001 and 5001 respectively.
    n
    •If you prefer your machine not to print an ACTIVITY REPORT after every 20 transactions,
    disable the 
    ACTIVITY REPORTsetting (1p.14-5).
    •Please note that only one transaction number (TX/RX NO.) is assigned when you send a
    document to several fax numbers in one operation.
    A12/26 13:43 905 795 1111    Canon CANADA 5001 AUTO RX ECM 1 OK 00’33A12/26 13:45 905 795 1111    Canon CANADA 0001 POLLING RX G3 0 NG 00’00
    A12/26 13:51 03 3758 2111    Canon TOKYO 0002 B’CAST ECM 3 OK 01’18A12/26 13:53 2 887 0166    Canon AUSTRALIA 0002 B’CAST ECM 3 OK 01’18A12/26 14:10 905 795 1111    Canon CANADA 5002 AUTO RX ECM 1 OK 00’18A12/26 14:16 2 887 0166    Canon AUSTRALIA 5003 AUTO RX ECM 4 OK 03’59A12/26 14:27 20 545 8545    Canon EUROPA 0003 DELAYED TX ECM 1 OK 01’20
    12/26 14:30 20 545 8545    Canon EUROPA 0004 DEL SQ BDCST ECM 1 OK 00’36
    12/26 14:31 03 3758 2111    Canon TOKYO 0004 DEL SQ BDCST ECM 1 OK 00’36
    12/26 14:57 2 887 0166    Canon AUSTRALIA 0005 TRANSMIT ECM 3 NG 01’25
         
      12/26 14:59 1 432 2060    CANON OPTICS 0006 TRANSMIT 0 NG 00’01
       
    *************************** ***************************
    *** ***ACTIVITY REPORT
    ST. TIME      CONNECTION TEL CONNECTION ID NO. MODE PGS. RESULT
     12/26/2003  15:00  FAX 123 4567                      CANON                                                              001
    3  STOP 0  STOP
    0   #018
    TRANSACTION (TX/RX) NUMBER
    TRANSACTION MODE
    INDICATES AN 
    ENTRY THAT HAS 
    APPEARED ON A 
    PREVIOUS REPORT.
    ERROR PAGE
    ERROR CODE (1 p. 13-8)
    Stop/Reset PRESSED DURING TRANSACTION
    TRANSACTION DURATION
    ERROR CORRECTION MODE TRANSACTION
    PRINTING REPORT
    ACTIVITY REPORT 
    						
    							11-4Reports and Lists Chapter 11
    TX (Transmission) REPORT
    The machine is factory-set to print a TX (transmission) REPORT only when an error
    occurs during sending. To change this setting, see 
    TX REPORT, p. 14-5.
    If you set your machine to print a report, a TX REPORT or an ERROR TX REPORT
    similar to the ones below, will be printed depending on the setting you select.
    TRANSMISSION OK
    TX/RX NO 0003
    CONNECTION TEL  1 432 2060
    SUBADDRESS
    CONNECTION ID Canon OPTICS
    ST. TIME 27/12 14:52
    USAGE T 00’34
    PGS. SENT    1
    RESULT OK
     12/26/2003  14:52  FAX 123 4567                      CANON                                                                        001
    ********************* *********************
    *** ***TX REPORT
    TX FUNCTION WAS NOT COMPLETED
    TX/RX NO 0004
    CONNECTION TEL 20 545 8545
    SUBADDRESS
    CONNECTION ID Canon EUROPA
    ST. TIME 12/26 14:59
    USAGE T 00’18
    PGS. SENT    1
    RESULT NG
    THE SLEREXE COMPANY LIMITED
    SAPORS LANE•BOOLE•DORSET•BH25 8ERTELEPHONE BOOLE (945 13) 51617 – FAX 123456Our Ref. 350/PJC/EAC26 December, 2003
    Dr. P. N. Cundall,
    Mining Surveys Ltd.,
    Holroyd Road,
    Reading,
    Berks.
     12/26/2003  14:59  FAX 123 4567                      CANON                                                                        001
    *************************** ***************************
    *** ***ERROR TX REPORT
    IF YOU  ENABLE THE PRINT WITH IMAGE 
    SETTING (1 p. 14-5), THE FIRST PAGE OF THE 
    FAX WILL PRINT ON THE REPORT TO REMIND 
    YOU OF THE CONTENTS OF THE FAX.
    OK: TRANSMISSION SUCCESSFUL
    NG: SOME OR NO PAGES SENT
    NUMBER OF PAGES SENT
    TRANSMISSION DURATION
    TRANSMISSION TIME 
    						
    							Chapter 11 Reports and Lists11-5
    Reports and Lists
    MULTI TX/RX (Transaction) REPORT
    A MULTI TX/RX (transaction) REPORT similar to the one below, is printed when you
    send the same document to several fax numbers, or when you poll multiple fax
    numbers in one operation.
    RX (Reception) REPORT
    The machine is factory-set not to print an RX (reception) REPORT even if an error
    occurs during reception. To change this setting, see 
    RX REPORT, p. 14-5.
    If you set your machine to print a report, an RX REPORT similar to the one below, will
    be printed.
    ********************* *********************
    *** ***RX REPORT
    RECEPTION OK
    TX/RX NO 5004
    CONNECTION TEL 905 795 1111
    SUBADDRESS
    CONNECTION ID Canon CANADA
    ST. TIME 12/26     14:59
    USAGE T 01’59
    PGS.   4
    RESULT OK
     12/26/2003  15:02  FAX 123 4567                      CANON                                                                        001
    OK: RECEPTION SUCCESSFUL
    NG: SOME OR NO PAGES RECEIVED
    NUMBER OF PAGES RECEIVED
    RECEPTION DURATION
    RECEPTION TIME
    ****************************** ******************************
    *** ***MULTI TX/RX REPORT
    TX/RX NO 0054
    PGS.    1
    TX/RX INCOMPLETE –––––
    TRANSACTION OK [    01]905 795 1111 Canon CANADA
    [ A01]03 3758 2111 Canon TOKYO
    [ A 02]1 49 39 25 25 Canon FRANCE
    ERROR INFORMATION –––––
     12/26/2003  17:23  FAX 123 4567                      CANON                                                                        001 
    						
    							11-6Reports and Lists Chapter 11 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer FAXPHONE L80 User Manual