Canon Pixma Mp830 User Guide

							Chapter 2 49Copying
zCreating Stickers (Sticker copy)
This feature enables you to easily make stickers from 4" x 6" / 101.6 x 152.4 mm photos or 
graphics using Canon sticker paper.
(A) Platen Glass (place document face down)
(B) 16 stickers
Procedure:
(1)Display the Special copy screen.
See“Special Copy” on page 47.
(2)Use [ ] or [ ] to select , then press [OK]. 
(3)Use [ ] or [ ] to select .
You can only print in the Stickers x 16 layout (A) though other layouts appear on the LCD.
Use the special sheets of stickers.
(4)Follow the on-screen instructions to load the document on the Platen Glass, then press 
[OK].
(5)Specify the necessary items.
See“To Change Print Settings” on page 37.
(6)Press [Color] for color copying, or [Black] for black & white copying.
Note
zThis function cannot be used in conjunction with other copy functions.
zIf  appears on the LCD when scanning, set the print quality to 
 or  and try copying again.
zThis function can be used only when page size is set to  or .
zYou cannot specify  for this function.
Note
zWhen using this feature, load the document on the Platen Glass.
zLoad stickers in the Auto Sheet Feeder when using this function.
zThis function cannot be used in conjunction with other copy functions.
zYou can only load one sheet of stickers at a time in the Auto Sheet Feeder when using this 
function.
zYou cannot specify the page size, media type, or  when using this function.
zThe print quality is fixed to . You cannot change this setting.
(B) (A)
(A)
 
						

							50Chapter 2Copying
zCopying without Borders (Borderless copy)
This feature enables you to copy images so that they fill the entire page without borders.
Procedure:
(1)Display the Special copy screen.
See“Special Copy” on page 47.
(2)Use [ ] or [ ] to select , then press [OK].
(3)Specify the necessary items.
See“To Change Print Settings” on page 37.
(4)Press [Color] or [Black] to start copying.
zRepeating an Image on a Page (Image repeat)
This feature enables you to copy an image multiple times onto a single page. You can set the 
machine to automatically select the number of times it repeats the image, or you can specify the 
number.
Procedure:
(1)Display the Special copy screen.
See“Special Copy” on page 47.
(2)Use [ ] or [ ] to select , then press [OK]. 
(3)Use [ ] or [ ] to select  or .
If you selected  and pressed [OK], go to step (7).
If you selected  and pressed [OK], go to step (4).
(4)Use [ ] or [ ] to set the vertical repeats.
Note
zWhen using this feature, load the document on the Platen Glass.
zThe copied image may need to be enlarged to fit onto the selected page size when making 
borderless copies. Some cropping may occur.
zYou can use this feature only when the page size is set to , , , 
, or .
zYou can use this feature only when the paper is set to , , 
, .
zYou can specify print quality to either  or .
zYou can select the width to be cropped from the borders of the original image according to 
the image size.
 
						

							Chapter 2 51Copying
(5)Press [ ] to move the cursor to the right.
(6)Use [ ] or [ ] to set the horizontal repeats, then press [OK].
(7)Specify the necessary items.
See“To Change Print Settings” on page 37.
(8)Press [Color] for color copying, or [Black] for black & white copying.
zMaking Multiple Copies of an Entire Document (Collation)
When making multiple copies of a document with more than one page you have them delivered 
in sorted sets.
(A) Documents
(B) Select 
(C) Not Select 
(D) Copy 1
(E) Copy 2
(F) Copy 3
Procedure:
(1)Display the Special copy screen.
See“Special Copy” on page 47.
Important
zThe area read from the documents depends on the enlargement/reduction ratio.
zThe size of the documents to copy should be no larger than one division of the paper. For 
example, if you copy four documents at the same size, their sizes must be one-fourth of 
the page size or smaller.
Note
z cannot be selected for the page size.
z cannot be selected for .
zWhen selecting  for the number of times to repeat the image, set the document on 
the Platen Glass. You cannot use the ADF.
(D) (A)(B)
(C)(D) (E) (F)
(E) (F)
 
						

							52Chapter 2Copying
(2)Use [ ] or [ ] to select , then press [OK].
(3)Specify the necessary items.
See“To Change Print Settings” on page 37.
(4)Press [Color] for color copying, or [Black] for black & white copying.
zCopying with Fade Restoration (Fade-restored copy)
This function helps to correct the color when copying documents that have faded over time.
Procedure:
(1)Display the Special copy screen.
See“Special Copy” on page 47.
(2)Use [ ] or [ ] to select , then press [OK].
(3)Specify the necessary items.
See“To Change Print Settings” on page 37.
(4)Press [Color] to start copying.
Note
zThis function cannot be used in conjunction with other copy functions.
zLoad the document in the ADF when using this function.
zUsing this function might cause a reduction in print quality. For best results, print without 
using collation.
zThe number of pages the machine can read varies with the document. If  appears on the LCD when scanning, reduce the number of document pages to 
scan and try copying again.
Note
zWhen using this feature, load the document on the Platen Glass.
zThis function can only be used when the page size is set to , , , 
, or .
zYou can use this feature only when the paper is set to , , 
, .
zYou can specify print quality to either  or .
zNeither magnification or intensity can be specified.
zFade Restoration is not guaranteed to be effective with any photograph.
z is only available when making color copies.
 
						

							Chapter 3
Chapter 3 53Printing from a Memory Card
Printing from a Memory Card
Using the Memory Card
This section describes the compatible memory cards and how to insert and remove them.
„Memory Cards Supported by This Machine
The following memory cards are compatible with this machine. 
Memory cards that can be directly inserted into the Card Slot:
zCompact Flash (CF) Card
Supports Type I/II (3.3V)
zMicrodrive
zSmartMedia
Supports 3.3V card only
1MB and 2MB cards are not supported
zMEMORY STICK
zMEMORY STICK PRO
zSD Secure Digital memory card
zMultiMedia Card
Memory cards that can be inserted in the Card Slot using the adapter:
xD-Picture Card*1
zMEMORY STICK Duo*2
zMEMORY STICK PRO Duo*2
miniSD Card*2
 
						

							54Chapter 3Printing from a Memory Card
*1 Requires purchase of a separate compact flash card adapter for xD-Picture cards.*2 Use the special adapter provided with the card.
„Inserting the Memory Card
1Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 18.
2Open the Card Slot Cover.
Important
zThis machine supports image data created by DCF standard digital cameras (based on 
Exif), and DPOF (based on Ver 1.00).
zImage data taken or saved on memory cards that do not guarantee the action with the 
digital camera might be unreadable from the machine or the image data might be 
damaged. For details on memory cards guarantee the action with the digital camera, refer 
to the manuals supplied with your digital camera.
zFormat the memory card with a digital camera. The memory card might not be usable with 
the machine if formatted on a computer.
zImages edited on a computer may not be printed correctly.
zDo not insert more than one memory cards at a time.
Note
zWhen  is selected in Read/write attribute under Other settings by using 
the Operation Panel on the machine, card direct printing cannot be done. After using the 
Card Slot as the memory card drive of the computer, remove the memory card, then be 
sure to set Read/write attribute to . See “Read/write attribute” on 
page 140.
zWhen you have edited or processed the data on a memory card on a computer, be sure to 
print the data from the computer. If you print using the Operation Panel, the data might not 
be printed correctly.
 
						

							Chapter 3 55Printing from a Memory Card
3Insert a memory card into the Card Slot.
* Be sure to attach the memory card to the special adapter before inserting it into the Card 
Slot.
4Ensure that the Access Lamp is lit.
5Close the Card Slot Cover.
Card TypeInserting Card
zCompact Flash (CF) card
zMicrodrive
zxD-Picture card*
Insert into the Card Slot on the left side. 
The Access Lamp (A) lights up.
zSmartMedia
Insert into the Card Slot on the right side. 
The Access Lamp (A) lights up.
zMEMORY STICK
zMEMORY STICK PRO
zMEMORY STICK Duo*
zMEMORY STICK PRO Duo*
zSD Secure Digital memory card
zminiSD Card*
zMultiMedia card
Insert into the center part of the Card Slot on the right side.
The Access Lamp (A) lights up.
Caution
zThe memory card sticks out of the Card Slot, but do not force it into the slot any further. 
Doing so damages the machine and the memory card.
zCheck if the right side of the memory card is facing to the right. If you force the memory 
card with the wrong direction into the Card Slot, the machine and/or the memory card may 
be damaged.
zWhile the Access Lamp is flashing, do not remove the memory card or the card adapter 
containing the memory card, nor turn off the machine, as this might damage the data on 
the memory card.
(A)
(A)
(A)
 
						

							56Chapter 3Printing from a Memory Card
„Removing the Memory Card
1Open the Card Slot Cover.
2Ensure that the Access Lamp is not flashing, then remove the memory card.
3Close the Card Slot Cover.
Printing Photograph
Let’s select a photo from the photos stored on the memory card of the digital camera, and print it.
„Printing Photo Displayed on the LCD (Single-photo print)
Print a photo saved on the memory card.
1Prepare for printing.
(1)Press [ON/OFF] to turn on the machine.
See“Turning on the Machine” on page 18.
(2)Load paper.
See“Loading Paper” on page 22.
(3)Ensure that the proper paper source is selected.
See“Changing the Paper Source” on page 27.
(4)Insert a memory card into the Card Slot.
See“Inserting the Memory Card” on page 54.
Note
If you use the Card Slot as a memory card drive for your computer, removing operation from 
the computer is required before removing the memory card.
zWhen Windows is being used, right-click the removable disk icon and click [Eject]. If [Eject] 
is not displayed on the screen, ensure that the Access Lamp is not flashing and remove 
the memory card.
zWhen Macintosh is being used, be sure to drag the   icon into the Trash.
Important
Removing the memory card or turning off the machine while the Access Lamp is flashing can 
damage the data stored in the memory card.
Note
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when feeding paper from the 
Auto Sheet Feeder and the Cassette Lamp is lit when feeding paper from the Cassette.
 
						

							Chapter 3 57Printing from a Memory Card
2Select the print menu.
(1)Press [MEMORY CARD].
(2)Use [ ] or [ ] to select , then press [OK].
The photo selection screen is displayed.
3Select the photo you want to print.
(1)Use [ ] or [ ] to display the photo you want to print.
(2)Press [Color].
The print confirmation screen is displayed.
Note
 may be displayed on the LCD while reading the photo.
Note
Displaying Photos Automatically on the LCD (Slide Show)
You can automatically display photos in sequence when selecting .
zTo start the slide show, press [OK] when checking photos in .
zTo stop the slide show, press [Stop/Reset] during the slide show.
You can do...
zTo search for photos with the shooting date (Search), see “Searching for Photos with the 
Shooting Date (Search)” on page 59.
zTo print a specified area (Trimming), see “Printing a Specified Area (Trimming)” on 
page 60.
(2)
 
						

							58Chapter 3Printing from a Memory Card
4Start printing.
(1)Check the page size and media type.
(2)Use [ ] or [ ], or the Numeric buttons to specify the number of prints.
(3)Press [Color].
The machine starts printing.
„Specifying How Many Copies to Print for Each Photo (Multi-photo print)
You can specify the number of prints to be made for each photo.
1Prepare for printing.
See “Prepare for printing.” on page 56.
2Select the print menu.
(1)Press [MEMORY CARD].
(2)Use [ ] or [ ] to select , then press [OK].
The photo selection screen is displayed.
3Specify the number of prints for each photo.
(1)Use [ ] or [ ] to select the image you want to print.
(2)Use [ ] or [ ], or the Numeric buttons to specify the number of prints.
(3)Repeat from step (1) to step (2) to specify the number of prints for each photo.
(4)Press [OK].
The print confirmation screen is displayed.
Note
Press [Settings] to check or change the page size, media type, or other settings. See “To 
Change Print Settings” on page 37.
Note
zTo cancel printing, press [Stop/Reset].
zThe printing is not started if you press [Black].
(2)
(1)
(2)