Canon Pixma Mp830 User Guide

							Chapter 1 39Before Printing
„Print Setting Items
Each tab contains the following setting items. To change the tab, use [ ] to select the tab and 
use [ ] or [ ].
zCopy mode
This section describes the Settings screen for Copy mode.
Ta b  1
You can specify the paper settings for printing or print quality.
(1)You can specify the page size.
8.5" x 11", 8.5" x 14", A4, B5, A5, 4" x 6", 5" x 7", credit card
(2)You can specify the media type.
Plain paper, Photo Paper Pro, Photo Plus, Matte Photo, Glossy Photo
(3)You can adjust image quality according to the documents you want to copy.
Fast, Standard, High
(4)You can specify the reduction or enlargement method.
Same magnification, Preset ratio, Zoom (25 - 400%), Fit-to-page
Ta b  2
You can specify auto intensity.
(5)This function automatically adjusts the intensity of the document on the Platen Glass.
Auto intensity ON, Auto intensity OFF
Note
Depending on the functions specified in the Copy or Memory card mode, some setting items 
cannot be specified in combination.
Important
Some page sizes cannot be loaded in the Cassette and should be loaded in the Auto 
Sheet Feeder.
Note
Some of these are not available depending on the country of purchase.
Note
z can be selected when  is selected as the media type.
zWhen using  with media type set to , if the quality is different from 
that expected, select  or  and try copying again.
zSelect  to copy in grayscale. Grayscale renders tones in a range of grays 
instead of black or white.
(1)(2)
(3)
(4)(5)
 
						

							40Chapter 1Before Printing
zMemory card mode
This section describes the Settings screen for Memory card mode.
Ta b  1
You can specify the settings such as the paper, bordered/borderless, and Date/file no.
(1)Select the page size.
8.5" x 11", A4, 4" x 6", 5" x 7", credit card
(2)Select the media type.
Plain paper, Photo Paper Pro, Photo Plus, Matte Photo, Glossy Photo
(3)Select the print quality.
Standard, High
(4)Select bordered or borderless print.
Bordered, Borderless
(5)Select whether to print the shooting date, file no., or not.
No date/file no., Print date only, Print file no. only, Print date & file no.
Note
You can change the print settings on this screen when a PictBridge compliant device is 
connected to this machine.
Important
Some page sizes cannot be loaded in the Cassette and should be loaded in the Auto 
Sheet Feeder.
Note
Some of these are not available depending on the country of purchase.
Note
When  is selected in , bordered printing will be performed 
even if you select .
(1)(2)
(3)
(4)
(5)
 
						

							Chapter 1 41Before Printing
Ta b  2
Allows you to optimize photos with the functions below.
(1)Red eye correction ON, Red eye correction OFF
When  is selected, portraits with a red eye caused by flash 
photography are corrected in print.
(2)Activate/deactivate Vivid photo function.
This function makes green and blue more lively.
Vivid photo ON, Vivid photo OFF
(3)Activate/deactivate the Photo Optimizer pro function.
This function automatically optimizes brightness and tone of a photo.
Photo optimizer pro ON, Photo optimizer pro OFF
(4)Activate/deactivate the Noise reduction function.
This function reduces the noise on blue areas like the sky as well as on black areas.
Noise reduction ON, Noise reduction OFF
(5)Activate/deactivate Face brightener function.
This function brightens a darkened face on the photo taken against the light.
Face brightener ON, Face brightener OFF
(6)Choosing  enables you to correct and smooth the jagged contours 
for printing.
Image optimizer ON, Image optimizer OFF
(7)Adjust brightness.
Brightness +2, Brightness +1, Brightness standard, Brightness -1, Brightness -2
(8)Adjust contrast.
Contrast +2, Contrast +1, Contrast standard, Contrast -1, Contrast -2
(9)Adjust color hue.
Color hue red +2, Color hue red +1, Color hue original, Color hue yellow +1, Color hue 
yellow +2
(10)Select the type of special effects applied to the photo, such as printing in sepia tones or 
with a sketch illustration like effect.
No effects, Sepia, Simulate illustration
(1)(2)(3)(4)
(6)(7)(8)(9)(5)(10)
 
						

							Chapter 2
42Chapter 2Copying
Copying
Making Copies
This section describes the basic procedure to make copies.
1Prepare for copying.
(1)Press [ON/OFF] to turn on the machine.
See“Turning on the Machine” on page 18.
(2)Press [COPY].
(3)Load paper.
See“Loading Paper” on page 22.
(4)Ensure that the proper paper source is selected.
See“Changing the Paper Source” on page 27.
(5)Load the document on the Platen Glass or the ADF.
2Start copying.
(1)Check the page size and media type.
(2)Use [ ] or [ ], or the Numeric buttons to specify the number of copies.
The following information is displayed as well.
(3)Press [Color] for color copying, or [Black] for black & white copying.
The machine starts copying.
Note
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when feeding paper from the 
Auto Sheet Feeder and the Cassette Lamp is lit when feeding paper from the Cassette.
Note
For information on the types and conditions of documents which you can copy, see “Loading 
Documents” on page 20.
Note
Press [Settings] to check or change the page size, media type, or other settings. See “To 
Change Print Settings” on page 37.
Intensity: Pressing [ ] decreases the intensity, and pressing [ ] increases the 
intensity.
You can also use the auto intensity. See “Print Setting Items” on page 39.
(1)(2)
 
						

							Chapter 2 43Copying
„Reducing or Enlarging a Copy
You can reduce or enlarge copies.
1Prepare for copying.
See “Prepare for copying.” on page 42.
2Select the reduction/enlargement method.
The example below assumes that you will select .
(1)Press [Settings].
(2)Use [ ] or [ ] to select Tab 1.
(3)Use [ ] or [ ] to select , and use [ ] or [ ] to select .
Specify the custom copy ratio for reducing or enlarging copies.
Besides , you can also choose from the following reduction/
enlargement methods.
(4)Press [ ] to move the cursor down, and use [ ] or [ ] to select the setting value. 
Holding down [ ] or [ ] steps through the values faster.
3Finalize your selection.
(1)Press [Settings].
Return to the Copy standby screen.
4Start copying.
See “Start copying.” on page 42.
Note
zTo cancel copying, press [Stop/Reset].
zThe machine can also receive faxes in copy mode (when [COPY] is pressed).
Same magnification: Copies in the same size as an original.
Preset ratio: Preset ratios are convenient when changing between standard page sizes, 
for example, when reducing A4 to A5, or enlarging B5 to A4.
Fit-to-page: You can automatically reduce or enlarge the document to fit the size of the 
paper which are loaded in the Auto Sheet Feeder or Cassette.
Note
When loading the document on the ADF, you cannot select .
Note
When you choose , the document size may not be detected correctly depending 
on the document. In that case, choose ,  or .
(3)
 
						

							44Chapter 2Copying
„Copying onto Both Sides of the Paper
You can copy two document pages onto the sides of a single sheet of paper, or the sides of a 
double-sided document onto either the sides of a single sheet of paper or two sheets of paper.
zSingle-sided to Two-sided
zTwo-sided to Two-sided
zTwo-sided to Single-sided
(A) Long-side stapling
(B) Short-side stapling
1Prepare for copying.
(1)Press [ON/OFF] to turn on the machine.
See“Turning on the Machine” on page 18.
(2)Press [Two-Sided].
(3)Load paper.
See“Loading Paper” on page 22.
(4)Ensure that the proper paper source is selected.
See“Changing the Paper Source” on page 27.
2Select the orientation of the document.
(1)Use [ ] or [ ] to select the orientation of the document, then press [OK].
Note
When specifying enlarge/reduce for two-sided copying, load the document on the Platen Glass.
Note
zSpecify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when feeding paper from 
the Auto Sheet Feeder and the Cassette Lamp is lit when feeding paper from the Cassette.
zYou can also display the Two-sided copy screen by selecting  under the 
Special copy screen.
(A) (B)
(A) (B)
(A) (B)
 
						

							Chapter 2 45Copying
3Select the binding margin.
(1)Use [ ] or [ ] to select the binding margin, then press [OK].
4Load the document.
(1)Follow the on-screen instructions to load the document, then press [OK].
5Specify the necessary items.
See “To Change Print Settings” on page 37.
6Start copying.
(1)Press [Color] for color copying, or [Black] for black & white copying.
zWhen the document was loaded on the Platen Glass:
(2)Load the document to be printed on the back face on the Platen Glass. If you have only 
one document to scan, press [OK].
(3)Press [Color] or [Black]. Be sure to press the same button as you pressed in step (1).
zWhen the document was loaded in the ADF:
The machine starts copying automatically after the document is scanned in.
Important
If you do not press the same button in step (1) and step (3), the machine does not start 
copying.
Note
zThis function cannot be used in conjunction with  under  or other 
copy functions.
zIf you perform black & white copying for , print intensity may be different from 
when performing black & white copying for single-sided copy.
zThis function can only be used when the page size is set to  or . Two-sided to 
two-sided copying and two-sided to single-sided copying can only be performed for A4- or Letter-
sized originals. 
zThe media type is fixed to . You cannot change this setting.
zWhen the document is set to the ADF, the document pages are not ejected in the original order 
under the machine's default setting. If you want the document pages to eject in the original order, 
set  to . See “Two-sided output setting” on page 136.
 
						

							46Chapter 2Copying
Changing the Copy Settings
You can change the copy settings such as the page size, media type, or print quality.
For details on changing the copy settings and setting items, see “To Change Print Settings” on 
page 37.
1You can specify the page size.
2You can specify the media type.
3You can adjust print quality for the document to be copied.
4You can specify the reduction/enlargement method.
See “Reducing or Enlarging a Copy” on page 43.
5You can specify if auto intensity is performed.
Specifying  automatically changes the icon above the intensity slide bar 
on the LCD to .
Important
Even while  is selected, you can change the intensity by pressing [ ] or 
[ ]. Move the cursor to the center of the slide bar to enable auto intensity again.
1234
5
 
						

							Chapter 2 47Copying
Using Useful Copy Functions
„Special Copy
You can copy in various layouts.
1Prepare for copying.
See “Prepare for copying.” on page 42.
2Select the copy menu.
(1)Press [Menu].
(2)Use [ ] or [ ] to select , then press [OK].
The Special copy screen is displayed.
zCopying Two Pages to Fit onto a Single Page (2-on-1 copy)
This feature enables you to copy two documents (A) (B) onto a single sheet (C) of paper by 
reducing each image.
Procedure:
(1)Display the Special copy screen.
See“Special Copy” on page 47.
(2)Use [ ] or [ ] to select , then press [OK].
(3)Follow the on-screen instructions to load the document, then press [OK].
(4)Specify the necessary items.
See“To Change Print Settings” on page 37.
(5)Press [Color] for color copying, or [Black] for black & white copying.
zWhen the document was loaded on the Platen Glass:
(6)Load the document to be printed on the right side on the Platen Glass. If you have only 
one document to scan, press [OK].
(7)Press [Color] or [Black]. Be sure to press the same button as you pressed in step (5).
(2)
(A) (C) (B)
 
						

							48Chapter 2Copying
zWhen the document was loaded in the ADF:
The machine starts copying automatically after the document is scanned in.
zCopying Four Pages to Fit onto a Single Page (4-on-1 copy)
This feature enables you to copy four documents onto a single sheet of paper by reducing each 
image. Four types layouts can be selected.
Procedure:
(1)Display the Special copy screen.
See“Special Copy” on page 47.
(2)Use [ ] or [ ] to select  and press [OK].
(3)Use [ ] or [ ] to select the layout, then press [OK].
(4)Follow the on-screen instructions to load the document, then press [OK].
(5)Specify the necessary items.
See“To Change Print Settings” on page 37.
(6)Press [Color] for color copying, or [Black] for black & white copying.
zWhen the document was loaded on the Platen Glass:
(7)Load the second document to print on the Platen Glass, and press the same button as 
you pressed in step (6).
(8)Repeat step (7) until you finish loading the fourth document, then press the same button 
as you pressed in step (6). If you have only one, two or three documents to scan, press 
[OK] after loading the last document.
zWhen the document was loaded in the ADF:
The machine starts copying automatically after the document is scanned in.
Important
If you do not press the same button in step (5) and step (7), the machine does not start 
copying.
Note
zThis function cannot be used in conjunction with other functions.
zIf  appears on the LCD when scanning, set the print quality to 
 or  and try copying again.
zYou can use this feature only when the page size is set to  or . 
zYou cannot select .
Important
If you do not press the same button in step (6), steps (7) and (8), the machine does not start 
copying.