Canon Pixma Ip4840 User Guide

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos > Using the Red-Eye Correction Function
A061 
Using the Red-Eye Correction Function
You can correct red eyes caused by a camera flash. 
You can perform the Red-Eye Correction function either automatically or manually.
Note
Photo Print allows you to automatically correct red eyes when printing. To correct automatically,
select Enable Auto Photo Fix in Color correction for pr inting on the Advanced tab of the Preferences
dialog box and select the Enable Red-Eye Correction  checkbox.
1.Select photos in the Select Images screen, then cli ck  (Correct/Enhance
Images). 
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images win dow by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that case , only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images W indow for details on the Correct/Enhance Images window.
2.Select the image you want to correct from the thumb nail list in the Correct/Enhance
Images window. 
The image appears in Preview.
Note
If only one image is selected, the thumbnail list d oes not appear below Preview.
Page 161 of 468 pages
Using the Red-Eye Correction Function
.ownloadedtfromtManualsPrinterDcomtManuals   
						

							Auto Correction
3.Make sure that Auto is selected.
4.Click Red-Eye Correction.
5.Click OK. 
Red eyes are corrected and the 
 (Correction/Enhancement) mark appears on the upper left of
the image.
Important
Areas other than the eyes may be corrected dependin g on the image.
Note
Click  (Compare) to display the images before and after the correction side by side so that
you can compare and check the result.
Click Reset Selected Image to undo the correction o peration.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
Manual Correction
3.Click Manual, then click Correct/Enhance.
4.Click Red-Eye Correction.
Note
Effect levels can be changed using the slider below  Red-Eye Correction.
Move the cursor over the image. The shape of the cu rsor changes to  (Paintbrush).
5.Drag to select the red area you want to correct, th en click OK that appears over the
image. Page 162 of 468 pages
Using the Red-Eye Correction Function
.ownloadedtfromtManualsPrinterDcomtManuals  
						

							Red eye is corrected and the  (Correction/Enhancement) mark appears on the upper left of the
image.
Note
Click  (Compare) to display the images before and after t he correction side by side so that
you can compare and check the result.
Click Undo to undo the preceding correction operati on.
6.Click Save Selected Image or Save All Corrected Ima ges.
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Im age. To save all images, click Save All
Corrected Images.
Only JPEG/Exif data format is available for corrected i mages.
7.Click Exit.
Important
The corrections will be lost if you exit before saving corrected images.
Page top
Page 163 of 468 pages
Using the Red-Eye Correction Function
.ownloadedtfromtManualsPrinterDcomtManuals  
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos > Using the Face Brightener Function
A062 
Using the Face Brightener Function
You can brighten dark faces caused by bright backgr ound.
Note
You can brighten dark photos caused by bright backg round automatically by selecting Auto Photo
Fix. 
If the correction had not been made sufficiently, a pplying Face Brightener function is recommended.
Using the Auto Photo Fix Function
1.
Select photos in the Select Images screen, then cli ck  (Correct/Enhance
Images). 
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images win dow by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that case , only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images W indow for details on the Correct/Enhance Images window.
2.Select the image you want to correct from the thumb nail list in the Correct/Enhance
Images window. 
The image appears in Preview.
Note
If only one image is selected, the thumbnail list d oes not appear below Preview. Page 164 of 468 pages
Using the Face Brightener Function
.ownloadedtfromtManualsPrinterDcomtManuals   
						

							3.Click Manual, then click Correct/Enhance.
4.Click Face Brightener.
Note
Effect levels can be changed using the slider below Face Brightener.
Move the cursor over the image. The shape of the cu rsor changes to  (Cross).
5.Drag to select the area you want to correct, then c lick OK that appears over the
image.
The entire image is corrected so that the selected  area containing the face becomes brighter, and
the 
 (Correction/Enhancement) mark appears on the upper  left of the image.
Note
You can also drag to rotate the selected area.
Click  (Compare) to display the images before and after the correction side by side so that
you can compare and check the result.
Click Undo to undo the preceding correction operati on.
6.Click Save Selected Image or Save All Corrected Ima ges.
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Im age. To save all images, click Save All
Corrected Images.
Only JPEG/Exif data format is available for corrected i mages.
7.Click Exit. Page 165 of 468 pages
Using the Face Brightener Function
.ownloadedtfromtManualsPrinterDcomtManuals   
						

							Important
The corrections will be lost if you exit before saving corrected images.
Page top
Page 166 of 468 pages
Using the Face Brightener Function
.ownloadedtfromtManualsPrinterDcomtManuals 
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos > Using the Face Sharpener Function
A063 
Using the Face Sharpener Function
You can sharpen out-of-focus faces in a photo. 
You can perform the Face Sharpener function either aut omatically or manually.
1.Select photos in the Select Images screen, then cli ck  (Correct/Enhance
Images). 
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images win dow by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that case , only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images W indow for details on the Correct/Enhance Images window.
2.Select the image you want to correct from the thumb nail list in the Correct/Enhance
Images window. 
The image appears in Preview.
Note
If only one image is selected, the thumbnail list d oes not appear below Preview.
Auto Correction
3.Make sure that Auto is selected. Page 167 of 468 pages
Using the Face Sharpener Function
.ownloadedtfromtManualsPrinterDcomtManuals   
						

							4.Click Face Sharpener.
Note
Effect levels can be changed using the slider below Face Sharpener.
5.Click OK. 
The face is sharpened and the 
 (Correction/Enhancement) mark appears on the upper  left of the
image.
Note
Click  (Compare) to display the images before and after t he correction side by side so that
you can compare and check the result.
Click Reset Selected Image to undo the correction o peration.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
Manual Correction
3.Click Manual, then click Correct/Enhance.
4.Click Face Sharpener.
Note
Effect levels can be changed using the slider below  Face Sharpener.
Move the cursor over the image. The shape of the cu rsor changes to  (Cross).
5.Drag to select the area you want to correct, then c lick OK that appears over the
image. Page 168 of 468 pages
Using the Face Sharpener Function
.ownloadedtfromtManualsPrinterDcomtManuals  
						

							The facial area in and around the selected area is sharpened and the  (Correction/
Enhancement) mark appears on the upper left of the  image.
Note
You can also drag to rotate the selected area.
Click  (Compare) to display the images before and after the correction side by side so that
you can compare and check the result.
Click Undo to undo the preceding correction operati on.
6.Click Save Selected Image or Save All Corrected Ima ges.
You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Im age. To save all images, click Save All
Corrected Images.
Only JPEG/Exif data format is available for corrected i mages.
7.Click Exit.
Important
The corrections will be lost if you exit before saving corrected images.
Page top
Page 169 of 468 pages
Using the Face Sharpener Function
.ownloadedtfromtManualsPrinterDcomtManuals  
						

							Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos > Using the Digital Face Smoothing Function
A064 
Using the Digital Face Smoothing Function
You can enhance skin beautifully by removing blemishes and wrinkles.
You can perform the Digital Face Smoothing function ei ther automatically or manually.
1.Select photos in the Select Images screen, then cli ck  (Correct/Enhance
Images). 
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images win dow by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that case , only the image displayed in Preview
can be corrected/enhanced.
See Correct/Enhance Images W indow for details on the Correct/Enhance Images window.
2.Select the image you want to enhance from the thumb nail list in the Correct/
Enhance Images window. 
The image appears in Preview.
Note
If only one image is selected, the thumbnail list d oes not appear below Preview.
Auto Enhancement
3.Make sure that Auto is selected. Page 170 of 468 pages
Using the Digital Face Smoothing Function
.ownloadedtfromtManualsPrinterDcomtManuals