Canon Ir Advance C5045 User Guide

							1
Basic Copy Settings2-59
2
Making Copies in the Voice Navigation Mode
Enlargement
The available preset copy ratios for 
enlarging originals are:
•Maximum (400%)
*1
•STMT   11 x 17 (200%)
• LTR   11 x 17 (129%)
• LGL   11 x 17 (121%)
• A5   A3 (200%)
• A4   A3, B5   B4 (141%)
• A4   B4, A5   B5 (122%)
• B4   A3, B5   A4 (115%)
*1 Only when the original is placed on the  platen glass, depending on the model of 
the machine you are using.
1Place your originals.
NOTE
For instructions on placing originals, see 
Placing Originals, on p. 2-20.
 
						

							Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-60
2Press   (Back) or   (Next) to 
move the focus to [Copy Ratio]   
press  (Select).
The voice guide announces that the 
Copy Ratio setting screen is displayed.
IMPORTANT
Make sure that you select a paper size 
[Auto] in the Select Paper setting screen.
 
						

							1
Basic Copy Settings2-61
2
Making Copies in the Voice Navigation Mode
3Press   (Back) or   (Next) to 
move the focus over the desired 
preset copy ratio  press 
 (Select).
4Press  (Con firm).
The display returns to the Regular Copy 
Basic Features screen.
 
						

							Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-62
5Press  (Start).
Copying starts.
NOTE
•To return the copy ratio to 100%, move 
the focus to [Direct(100%)]/[1:1(100%)] 
 press   (Select).
•To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
Zoom by Percentage
You can reduce or enlarge originals by any 
copy ratio in 1% increments. The available 
copy ratios are from 25% to 400%. The same 
copy ratio is used for the horizontal (X) and 
vertical (Y) axes.
Set the zoom ratio in 1% increments with the 
following procedure.
1Place your originals.
NOTE
For instructions on placing originals, see 
Placing Originals, on p. 2-20.
 
						

							1
Basic Copy Settings2-63
2
Making Copies in the Voice Navigation Mode
2Press   (Back) or   (Next) to 
move the focus to [Copy Ratio]   
press  (Select).
The voice guide announces that the 
Copy Ratio setting screen is displayed.
3Press   (Back) or   (Next) to 
move the focus over the custom copy 
ratio   press   (Select).
The voice guide announces that the 
machine has entered the mode for 
entering numeric values.
4Enter the desired zoom ratio 
percentage using   -    (numeric  
keys)   press   (Con firm).
The voice guide announces that the ratio 
you have entered.
 
						

							Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-64
5Press  (Con firm) until you return 
to the Copy Basic Features screen.
NOTE
If you enter a value outside the setting 
range, you will hear a voice message 
prompting you to enter an appropriate 
value.
6Press  (Start).
Copying starts.
NOTE
•To return the copy ratio to 100%, move 
the focus to [Direct(100%)]/[1:1(100%)] 
 press  (Select).
•To cancel all settings and return the 
machine to the Standard mode, press   (Reset).
 
						

							1
Basic Copy Settings2-65
2
Making Copies in the Voice Navigation Mode
Auto Zoom
You can set the machine to automatically 
select the appropriate copy ratio based on the 
size of the original and the selected copy 
paper. The same copy ratio is used for the 
horizontal (X) and vertical (Y) axes. The 
available copy ratios are from 25% to 400%.
IMPORTANT
•You cannot copy highly transparent 
originals, such as transparencies, using the 
Auto setting on the Copy Ratio screen. Use 
the Preset Zoom or Zoom by Percentage 
mode instead.
•To use the Auto setting on the Copy Ratio 
screen, your originals must conform to one 
of the standard paper sizes: 11 x 17, LGL, 
LTR, LTRR, STMT, or STMTR/A3, B4, A4, 
A4R, B5, B5R, A5, A5R, or B6, or B6R
(You can place B6 only on the platen glass. 
You can place the B6R and A5R only into 
the feeder.)
 
						

							Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-66
1Place your originals.
NOTE
For instructions on placing originals, see 
Placing Originals, on p. 2-20.
2Press   (Back) or   (Next) to 
move the focus to [Copy Ratio]   
press  (Select).
If necessary, see the screen shot in step 
2 of Preset Zoom, on p. 2-57.
The voice guide announces that the 
Copy Ratio setting screen is displayed.
IMPORTANT
Make sure that you select a paper size 
other than [Auto]. If you do not select a 
paper size, the copy ratio is automatically 
set to match the size of the paper loaded 
in Paper Drawer 1.
 
						

							1
Basic Copy Settings2-67
2
Making Copies in the Voice Navigation Mode
3Press   (Back) or   (Next) to 
move the focus to [Auto]   press 
 (Select).
4Press  (Con firm). 
The display returns to the Regular Copy 
Basic Features screen.
5Press  (Start).
Copying starts.
 
						

							Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-68
NOTE
•If the original is placed on the platen 
glass, the copy ratio automatically 
appears when the feeder is closed, 
provided that the original size can be 
detected.
•If the original is placed in the feeder, the 
copy ratio appears when   (Start) is 
pressed.
•To return the copy ratio to 100%, move 
the focus to [Direct(100%)]/[1:1(100%)] 
 press   (Select).
•To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
Collating Copies
The Finishing modes can be selected to 
collate the copies in various ways, either by 
pages or copy sets.
There are three Finishing modes that are 
supported by the Voice Navigation mode: 
Collate, Group, and Staple.