Canon Ir 1600 User Guide

							7-19Finisher-L1
Handling Options
7
3Open the staple cartridge cover.
4Remove all of the staples that slide from the staple case.
5Return the staple cartridge cover to its original position.
 
						

							Handling Options
7
7-20Finisher-L1
6Push the staple cartridge back firmly into the finisher.
7Close the front cover of the finisher.
CAUTION
•When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
 
						

							7-21Inner 2-Way Tray-B1
Handling Options
7
Inner 2-Way Tray-B1
If you attach the Inner 2-Way Tray-B1 to the machine, prints can be delivered to both the Main Tray 
and the Inner tray.
IMPORTANT
•The Inner Tray is necessary when attaching the Inner 2-Way Tray-B1.•When the Finisher-L1 is attached, the Inner 2-Way Tray-B1 cannot be attached.
Parts and Their Functions 
q
w
1Inner tray (Tray A)
This is the additional tray of the Inner 2-way Tray.
2Tray of the main unit (Tray B)
 
						

							Handling Options
7
7-22Inner 2-Way Tray-B1
Tray Functions
■Collate Function
This function automatically collates paper into sets arranged in page order, and outputs them.
NOTE
•When the delivered paper reaches the stacking limit of the tray, printing stops temporarily. After you remove the 
delivered paper from the tray, the remaining printing restarts.
Clearing Paper Jams in the Inner 2-Way Tray-B1
If a paper jam occurs in the Inner 2-Way Tray-B1, the following display appears. Check where the 
jam occurred, and follow the procedure described below to remove the jammed paper.
CAUTION
•When removing jammed originals or paper, take care not to cut your hands on the edges of the original or 
paper.
•When removing jammed paper or when inspecting the inside of the machine, do not allow necklaces, 
bracelets, or other metal objects to touch the inside of the machine, as this may result in burns or electrical 
shock.
•When removing paper which has become jammed inside the machine, take care not to allow the toner on the 
jammed paper to come into contact with your hands or clothing, as this will dirty your hands or clothing. If 
they become dirty, wash them immediately with cold water. Washing with warm water will set the toner and 
make it impossible to remove the toner stains.
•When removing paper which has become jammed inside the machine, remove the jammed paper gently to 
prevent the toner on the paper from scattering and entering your eyes or mouth. If toner enters your eyes or 
mouth, wash them immediately with cold water and consult a physician.
REC. PAPER JAM
OPEN THE FRONT COVER
 
						

							7-23Inner 2-Way Tray-B1
Handling Options
7
1Open the front cover.
2Open the stack bypass.
3Pull out the left cover.
CAUTION
•Grasp the handle and pull out the left cover horizontally to the left. (Be careful not to pull it upward as it may 
easily come off.)
 
						

							Handling Options
7
7-24Inner 2-Way Tray-B1
4Open the upper left cover.
5Remove any jammed paper.
6Close the upper left cover.
CAUTION
•When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
 
						

							7-25Inner 2-Way Tray-B1
Handling Options
7
7Close the left cover.
CAUTION
•Close the left cover until it latches.
•When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
8Close the stack bypass.
CAUTION
•When closing the stack bypass, be careful not to get your fingers caught, as this may result in personal 
injury.
 
						

							Handling Options
7
7-26Inner 2-Way Tray-B1
9Close the front cover.
CAUTION
•When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
 
						

							7-27Card Reader
Handling Options
7
Card Reader
When the Card Reader is attached, insert a control card before operating the machine.
NOTE
•If the standby display does not appear even when the control card is inserted, make sure that:
- The control card is inserted in the correct direction.
- The control card is inserted as far as it can go.
- An unusable control card is not inserted. (For example, cards which are damaged, already used to the set limit, or not 
allowable.)
•Insert a usable control card correctly.•For details of how to turn the power on, see ‘Main Power and Control Panel Power,’ on p. 1-23.
Operations Before Using Copy
1Insert the control card into the card slot, making sure it is facing in the correct 
direction.
The standby display appears.
100% AUTO PAPER
TEXT
01
 
						

							Handling Options
7
7-28Card Reader
Operations After Using Copy
1After you finish using the machine, remove the control card.
The display returns to the screen for inserting the control card.
INSERT CONTROL CARD