Home > Canon > Printer > Canon Ir 1600 User Guide

Canon Ir 1600 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Ir 1600 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							5-13Replacing the Toner Cartridge
    Routine Maintenance
    5
    7With the side with the label facing up, insert the new toner cartridge toward the 
    direction of the arrow while grasping its handle.
    8Hold the toner cartridge with one hand, and remove the seal by pulling it out with the 
    other hand.
    IMPORTANT
    •Pull out the seal slowly, otherwise the scattered toner may soil your clothes, etc.•Pull out the seal completely, otherwise the print error may occur.•Pulling the seal upwards or downwards may break the seal. If the seal could break inside the toner cartridge and 
    cannot be removed completely, the toner cartridge may not be used.
    •Do not stop pulling the seal until it is removed completely from the toner cartridge because the toner may scatter and 
    printing quality may deteriorate.
    •Throw away the seal after removing it from the toner cartridge.
     
    						
    							Routine Maintenance
    5
    5-14Replacing the Toner Cartridge
    9Turn the toner cartridge to the direction of the arrow.
    IMPORTANT
    •Turn the toner cartridge fully until it locks into place.
    10Close the left cover.
    CAUTION
    •When closing the left cover, be careful not to get your fingers caught, as this may result in personal injury.
     
    						
    							5-15Replacing the Toner Cartridge
    Routine Maintenance
    5
    11Close the stack bypass.
    CAUTION
    •When closing the stack bypass be careful not to get your fingers caught, as this may result in personal injury.
    12Close the front cover.
    CAUTION
    •When closing the front cover, be careful not to get your fingers caught, as this may result in personal injury.
    IMPORTANT
    •Be sure to clean the roller every time you replace the toner cartridge. See “Cleaning the Roller,” on p. 5-26.
     
    						
    							5-16Replacing the Drum Cartridge
    Routine Maintenance
    5
    Replacing the Drum Cartridge
    When the drum cartridge is full of waste toner, messages  and 
     appear on the display. If you print another 200 pages after these 
    messages are displayed, messages  and  are 
    displayed and you cannot print until you replace the drum cartridge.
    WARNING
    •Do not throw used drum cartridges into open flames, as they may ignite the toner remaining inside the 
    cartridge, and result in burns or a fire.
    CAUTION
    •If you use the machine without inserting the drum cartridge,  appears on the display. 
    In this case, install the drum cartridge in the machine, turn off the main power, wait for at least 10 seconds, and 
    turn it on again.
    1Open the front cover.
    REPLACE THE DRUM
     
    						
    							5-17Replacing the Drum Cartridge
    Routine Maintenance
    5
    2Open the stack bypass.
    3Pull out the left cover.
    CAUTION
    •Grasp the handle and pull out the left cover horizontally to the left. (Be careful not to pull it upward as it may 
    easily come off.)
    4Release the blue unlock lever to its horizontal position.
     
    						
    							Routine Maintenance
    5
    5-18Replacing the Drum Cartridge
    5While gripping the blue handles of the drum cartridge, pull it out horizontally.
     
    6Cut the silver protective bag of a new drum cartridge with scissors and remove it from 
    the bag.
    7Place the drum cartridge on a flat surface, and remove the bubble wrap from the drum 
    cartridge.
    CAUTION
    •Do not touch the black seal yet in this step.
     
    						
    							5-19Replacing the Drum Cartridge
    Routine Maintenance
    5
    8Place the bubble wrap on the stack bypass to protect the drum cartridge when you 
    insert it.
    9While holding the handles of the drum cartridge, insert it aligning the blue label 
    attached to the left handle of the drum cartridge with the blue tab attached to the left 
    side of the machine.
    10While holding the handle of the drum cartridge with one hand, pull out the label with 
    the other hand to remove the black drum protective seal (seen in a bending posture).
     
    						
    							Routine Maintenance
    5
    5-20Replacing the Drum Cartridge
    11Insert the drum cartridge as far as it will go. Remove the bubble wrap.
    CAUTION
    •Be careful not to touch the blue-green drum.
    12Lock the blue unlock lever to its vertical position.
    13Close the left cover.
     
    						
    							5-21Replacing the Drum Cartridge
    Routine Maintenance
    5
    CAUTION
    •Close the left cover until it latches.
    •When closing the cover, be careful not to get your fingers caught and cause personal injury.
    14Close the stack bypass.
    15Close the front cover.
     
    						
    							5-22Routine Cleaning
    Routine Maintenance
    5
    Routine Cleaning
    If the original is not copied clearly, clean the following parts of the machine. For high-quality output, 
    we recommend cleaning these parts once a month.
    •Platen glass
    •Rear side of the platen glass cover
    •Feeder scanning area
    •White plate, roller
    WARNING
    •When cleaning the machine, first turn off the main power switch and unplug the power plug. Failure to do so 
    may result in a fire or electrical shock.
    •Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so might result in plastic 
    parts becoming deformed.
    CAUTION
    •Unplug the power plug from the outlet at least once a year, and clean the plug’s metal pins and the area 
    surrounding them to ensure all dust is removed. If dust accumulates in this area, it may result in a fire.
    •Do not dampen the cloth too much, as this may damage the original or break the machine.
    Cleaning the Platen Glass/Rear Side of Platen Glass 
    Cover
    Clean the platen glass and the rear side of platen glass cover following the procedure below.
    IMPORTANT
    •If the platen glass or the rear side of the platen glass cover is dirty, the original may not be scanned clearly, or the size 
    of the original may be detected incorrectly.
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Ir 1600 User Guide