Canon Imageprograf Ipf825 Mfp M40 User Guide
Have a look at the manual Canon Imageprograf Ipf825 Mfp M40 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1. Press the Load/Eject button. A confirmation message is displayed regarding removal of the roll. 2. Press the OK button. The roll can now be removed. 3. Open the Top Cover and lift the Ejection Guide. 4. Using both hands, rotate the Roll Holder in the direction of the arrow to rewind the roll. Handling Paper > Handling rolls > iPF815 Removing the Roll from the Printer 7 635
5. Remove the Roll Holder from the Roll Holder Slot. Note • For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from Rolls ." →P.637 6. Lower the Ejection Guide and close the Top Cover. Note • To load new paper in the printer at this point, see "Loading Rolls in the Printer." →P.628 Handling Paper > Handling rolls > Removing the Roll from the Printer iPF8157 636
Removing the Roll Holder from Rolls 1. Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at the position indica- ted (b), remove it from the Roll Holder. 2. Remove the Roll Holder from the roll. 3. When removing attachments, push the tips (a) in as you remove the attachment. •3-Inch Paper Core Attachment #1 ( Roll Holder side) Handling Paper > Handling rolls > iPF815 Removing the Roll Holder from Rolls 7 637
• 3-Inch Paper Core Attachment #2 ( Holder Stopper side) • 2-Inch Paper Core Attachment Important • Store the roll in the original bag or box, away from high temperature, humidity, and direct sunlight. If paper is not stored properly, the printing surface may become scratched, which may affect the printing qualitywhen you use it again. Feeding Roll Paper Manually When the printer is offline, you can advance or retract the roll on the Platen by pressing ▲ or ▼.1. Press the Online button to bring the printer offline. 2. Confirm that a roll is selected as the paper source. (See "Selecting the Paper Source.") →P.631 Handling Paper > Handling rolls > Feeding Roll Paper Manually iPF8157 638
3. Press the ▲ or ▼ button to advance or retract the roll. Press ▲ to retract the roll manually. Press ▼ to advance the roll manually. Note • Holding down ▲ or ▼ for less than a second moves the roll about 1 mm (0.04 in). Holding down ▲ or ▼ for more than a second moves the roll until you release the button. Release the button when the Display Screen indicates " End of paper feed. Cannot feed paper more.".Keeping Track of the Amount of Roll Paper Left If you have activated automatic monitoring of the remaining roll paper, when the roll is ejected, a barcode with text is prin- ted on the roll paper that identifies the type of paper and amount left. When this function is activated and barcodes are prin- ted on the roll paper, the type of paper and amount left are automatically detected after rolls are loaded. The barcode will be cut off after it has been read. Note • If the document is not cut but kept in the printer, only the text message is printed. Important • Because this function is not compatible with clear film, an error message may be displayed ( " The roll is empty." ) after you load clear film. For this reason, deactivate the function before loading clear film. • If the barcode on the roll is not detected, enter the type and length of paper on the Control Panel. Follow these steps to activate monitoring of the remaining roll paper. 1. Press the Menu button to display MAIN MENU.2. Press ▲ or ▼ to select Media Menu , and then press the ▶ button. 3. Press ▲ or ▼ to select ManageRemainRoll, and then press the ▶ button. 4. Press ▲ or ▼ to select the setting, and then press the OK button.Handling Paper > Handling rolls > iPF815 Keeping Track of the Amount of Roll Paper Left 7 639
Specifying the Ink Drying Time for Rolls When you are using paper that takes longer for ink to adhere, if the Cutter touches printed surfaces that are still wet, it may damage the paper or cause rough cut edges. Also, ink may be transferred onto the paper surface during ejection, soiling it. You can prevent problems by adjusting the drying time after printing before the paper is cut. Windows 1. Display the printer driver dialog box. (See "Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows) .") →P.213 2. Select the Main sheet and click CAdvanced Settings in AMedia Type. Handling Paper > Handling rolls > Specifying the Ink Drying Time for Rolls iPF8157 640
3. In the Paper Detailed Settings dialog box displayed next, select the desired settings values in BBetween Pages and CBetween Scans in ADrying Time, and then click OK. (See "Paper Detailed Settings Dialog Box (Windows) .") →P.219 Mac OS X 1. Choose Print in the application menu. 2. Select the Main pane and click CSettings in AMedia Type . Handling Paper > Handling rolls > iPF815 Specifying the Ink Drying Time for Rolls 7 641
3. In the Paper Detailed Settings dialog box displayed next, select the desired settings values in CBetween Pages and DBetween Scans in BDrying Time, and then click OK. (See "Paper Detailed Settings Dialog Box (Mac OS X) .") →P.438 Note • By factory default, Drying Time is deactivated ( Off ) for all paper types. • To have the printer wait for ink to dry immediately after printing without releasing paper, set Cutting Mode to Eject in the printer menu. (See "Specifying the Cutting Method for Rolls .") →P.642 Specifying the Cutting Method for Rolls How a roll is cut after ejection varies depending on the printer settings. Cutting Method Menu SettingsDriver Setting Automatic The roll is automatically cut by the Cutter Unit following printer driver settings. Cutting Mode Automat- ic Auto Cut Yes Eject →P.643 Choose this setting if you prefer not to have documents dropped immediately after printing, as when waiting for ink to dry. To cut the roll using the Cutter Unit, hold down the Stop button for a second or more. Eject Yes Man- ual →P.644 Choose this setting when using media that can- not be cut using the Cutter Unit. Cut each page from the roll using scissors. For continuous printing (if you will cut each page later), in Auto Cut , select Yes, or select Print Cut Guideline. Manual No Yes Print Cut GuidelineHandling Paper > Handling rolls > Specifying the Cutting Method for Rolls iPF8157 642
Cutting Method Menu SettingsDriver Setting Man- ual →P.644 (See "Cutting Roll Paper After Printing .")→P.196 Cutting Mode Auto Cut Manual No Yes Print Cut Guideline Paper Cut- ting →P.646 Choose this option if you want to cut pages by pressing Cutter Unit buttons for manual cutting after printing when the printer driver is config- ured to Auto Cut > No or Print Cut Guideline. Otherwise choose this option if you want to cut the roll edge after loading a roll. Paper Cutting Yes No Print Cut GuidelineNote • Automatic and Eject are valid only when you have specified Auto Cut > Yes in the printer driver. • With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut. Cut rolls manually in the following cases: Eject (waiting for ink to dry after printing) Important • When cutting wide printed documents after ejection, have two people support the documents. If the paper drops, printed documents may be damaged. • Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing quality. 1. Press the Menu button to display MAIN MENU.2. Press ▲ or ▼ to select Paper Details , and then press the ▶ button. Handling Paper > Handling rolls > iPF815 Specifying the Cutting Method for Rolls 7 643
3. Press ▲ or ▼ to select the type of paper, and then press the ▶ button. 4. Press ▲ or ▼ to select Cutting Mode, and then press the ▶ button. 5. Press ▲ or ▼ to select Eject, and then press the OK button. 6. Start printing. Roll paper is fed to the specified cut position and then automatically stopped. 7. As you support the printed document to prevent it from dropping, hold down the Stop button for at least a second to cut the roll. Manual (when using media that cannot be cut using the Cutter Unit ) 1. Press the Menu button to display MAIN MENU. 2. Press ▲ or ▼ to select Paper Details, and then press the ▶ button. Handling Paper > Handling rolls > Specifying the Cutting Method for Rolls iPF8157 644