Canon Imageprograf Ipf825 Mfp M40 User Guide
Have a look at the manual Canon Imageprograf Ipf825 Mfp M40 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Print Entire Sheet (Excel) For resizing the entire sheet to fit the roll width. Choose this option to enlarge the currently displayed sheet before printing. 1. Start Microsoft Excel . 2. If Start imagePROGRAF Print Plug-In is displayed, click it.3. Click Print from the imagePROGRAF Print Plug-In toolbar/ribbon.Important • When more than one worksheet is selected, the Printing Wizard cannot be run. Select only one worksheet and click Print again. If a print area is set, a confirmation message dialog box will appear. To print the entire sheet, cancel the setting of the print area. The Printing Wizard dialog box is displayed. Windows Software > Print Plug-In for Office > iPF815 Print Entire Sheet (Excel) 4 345
4. Click Print Entire Sheet. A message will appear informing you that analysis is in progress. The Layout menu will appear automatically. Note • If data analysis requires time, a message dialog will appear. If you select No, you will return to the application. 5. Select Roll Paper Width that is set in the printer. Windows Software > Print Plug-In for Office > Print Entire Sheet (Excel) iPF8154 346
6. Select image size. 7. Select layout. 8. To configure Binding, click the Binding Settings button. Refer to Configuring Binding (Excel) →P.351 for details on the procedure for configuring Binding. 9. Select Next. 10. Select Media Type . 11. Enter Copies. Note • When Print in Draft mode is selected, printing is fast but the print quality is poor. • Press the Print Preview button to display the preview screen. You can check and make changes to the layout in the preview screen. • When you print to the edge of the roll width, the maximum print length is 18.0m. 12. If the upper and lower margins are too wide, check No Spaces at Top or Bottom (Conserve Paper). The upper and lower margins can be checked in Print Preview. 13. Press Print to start printing. Important • If divided into plural pages, try reducing the data size or the range you select. • You cannot run Print or Print Preview if you select it for a worksheet with no data displayed.Windows Software > Print Plug-In for Office > iPF815 Print Entire Sheet (Excel) 4 347
Print Selected Area (Excel) For resizing the selected range of cells to fit the roll width. Choose this option to enlarge a particular part of the sheet before printing. 1. Start Microsoft Excel . 2. If Start imagePROGRAF Print Plug-In is displayed, click it.3. Click Print from the imagePROGRAF Print Plug-In toolbar/ribbon.Important • When more than one worksheet is selected, the Printing Wizard cannot be run. Select only one worksheet and click Print again. If a print area is set, a confirmation message dialog box will appear. To print the selected area, cancel the setting of the print area. The Printing Wizard dialog box is displayed. Windows Software > Print Plug-In for Office > Print Selected Area (Excel) iPF8154 348
4. Click Print Selected Area . Important • If only one cell is selected, Print Selected Area cannot be selected. A message will appear informing you that analysis is in progress. The Layout menu will appear automatically. Important • If the range selected in Excel 2007/2010 is too large, it will not be possible to analyze the data. Select a smaller range and then run the analysis. Windows Software > Print Plug-In for Office > iPF815 Print Selected Area (Excel) 4 349
Note • If data analysis requires time, a message dialog will appear. If you select No, you will return to the application. 5. Select Roll Paper Width that is set in the printer. 6. Select image size. 7. Select layout. 8. To configure Binding, click the Binding Settings button. Refer to Configuring Binding (Excel) →P.351 for details on the procedure for configuring Binding. 9. Select Next. 10. Select Media Type. 11. Enter Copies. Note • When Print in Draft mode is selected, printing is fast but the print quality is poor. • Press the Print Preview button to display the preview screen. You can check and make changes to the layout in the preview screen. • When you print to the edge of the roll width, the maximum print length is 18.0m. 12. If the upper and lower margins are too wide, check No Spaces at Top or Bottom (Conserve Paper). The upper and lower margins can be checked in Print Preview. Windows Software > Print Plug-In for Office > Print Selected Area (Excel) iPF8154 350
13. Press Print to start printing. Important • If divided into plural pages, try reducing the data size or the range you select. • You cannot run Print or Print Preview if you select it for a worksheet with no data displayed.Configuring Binding (Excel) You can configure Binding margins for binding printouts. 1. Configure the settings up to Layout Selection in the Layout screen in Print Entire Sheet or Print Selected Area . Refer to Print Entire Sheet (Excel) →P.345 and Print Selected Area (Excel) →P.348 for the configuration methods. 2. Click the Binding Settings button. Important • You cannot click the Binding Settings button in the following situations. • When the Image Size is set to 100% • When a graph is selected • When page breaks have been set • When a sheet or cell is protected Open the Binding Settings dialog box. 3. If the Binding checkbox is not checked, select it to turn binding on. 4. Select Binding Edge. 5. Select Binding Margin. Windows Software > Print Plug-In for Office > iPF815 Configuring Binding (Excel) 4 351
6. Click the OK button. Return to the Layout screen. Check that the Binding settings are applied in the preview screen. 7. Configure the settings in the Printing Wizard dialog box.Configuring Special Settings You can configure Special Settings from the imagePROGRAF Print Plug-In toolbar. 1. Click imagePROGRAF in the toolbar, and select Special Settings.2. Turn the checkbox for the item you want to change on or off. Item Details Show progress indicator during plug-in startup When this setting is off, hides the progress indicator that appears while the plug-in is starting up. Center sheets and print areas When this setting is off, printing is performed without changing the position. When this setting is on, printing is performed with the top, bottom, left, and right margins layed out equally. When this setting is off, printing is performed without changing the position. Windows Software > Print Plug-In for Office > Configuring Special Settings iPF8154 352
Item Details Center sheets and print areas This function is only valid in Microsoft Excel. Ensure image quality when creating page sizes When this setting is on, documents are created at the maximum size. This reduces the enlargement ratio during actual printing, which mini- mizes degradation of the quality of photos, etc. This function is only valid in [ Microsoft PowerPoint. Correct the print area when analyzing For data that cannot be processed with usual data analysis, the print area is corrected and then the data is processed. When data analysis fails, you may be able to print by turning on this checkbox. This function is only valid in Microsoft Excel. 3. Click OK to close the Special Settings dialog box. Windows Software > Print Plug-In for Office > iPF815 Configuring Special Settings 4 353
HDI Driver The Features of HDI Driver ............................................................................................................................. 354 Operating Environment ................................................................................................................................... 354 Installation Procedure ...................................................................................................................................... 355 Installing with the Canon Installer ............................................................................................................... 355 Installing with the Add-A-Plotter Wizard ...................................................................................................... 362 Opening the Plotter Configuration Dialog Box ................................................................................................. 367 Opening from the AutoCAD File Menu ........................................................................................................ 368 Opening from the Start Menu ...................................................................................................................... 369 Plotter Configuration Editor Dialog Box ........................................................................................................... 371 Media Source and Media Size Settings ...................................................................................................... 372 Graphics Settings ........................................................................................................................................ 373 Opening the Custom Properties Dialog Box .................................................................................................... 376 Custom Properties dialog box ......................................................................................................................... 378 Paper Detailed Settings ................................................................................................................................... 380 Output Method Dialog Box .............................................................................................................................. 382 Color Compatibility Dialog Box ........................................................................................................................ 382 Printing ............................................................................................................................................................ 383The Features of HDI Driver The main features of HDI Driver are as follows. •A special HDI (Heidi Device Interface) compatible printer driver for the Autodesk, Inc. software applications for Auto- CAD and AutoCAD LT architecture (hereafter referred to together as "AutoCAD"). • You can set up the print job with the most appropriate settings for the media and print clear, sharp printouts of plans and diagrams created with AutoCAD. Operating Environment The HDI driver operating environment is as follows. •Compatible Operating System Windows XP, Windows Vista, Windows 7 • Compatible AutoCAD Version AutoCAD 2005, AutoCAD LT2005, AutoCAD 2006, AutoCAD LT2006, AutoCAD 2007, AutoCAD LT2007, DWG TrueView 2007, AutoCAD 2008, AutoCAD LT2008, DWG TrueView 2008, AutoCAD 2009, AutoCAD LT2009, DWG TrueView 2009, AutoCAD 2010, AutoCAD LT2010, DWG TrueView 2010, AutoCAD 2011, AutoCAD LT2011, DWG TrueView 2011, AutoCAD 2008(x64), DWG TrueView 2008(x64), AutoCAD 2009(x64), AutoCAD LT2009(x64), DWG TrueView 2009(x64), AutoCAD 2010(x64), AutoCAD LT2010(x64), DWG TrueView 2010(x64) AutoCAD 2011(x64), AutoCAD LT2011(x64), DWG TrueView 2011(x64) Note • The supported OS version differs for each version of AutoCAD. Check with Autodesk for details. Windows Software > HDI Driver > The Features of HDI Driver iPF8154 354