Canon Imageprograf Ipf825 Mfp M40 User Guide
Have a look at the manual Canon Imageprograf Ipf825 Mfp M40 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2. Place the pointer inside the selection box of the object to show the crosshair handle, and drag it to move the object. Alternatively, you can move the Object Position by changing the values in Vertical Pos, Horizontal Pos and Page Pos in the Format Dialog Box →P.265 . Rotating an Object You can rotate the object. 1. Select an object. 2. Select Rotate Left 90 Degrees or Rotate Right 90 Degrees from the toolbar. Alternatively, you may click on the Rotate check box in the Format Dialog Box →P.265 then select Rotate Right or Rotate Left, and click the OK button. Windows Software > Free Layout > iPF815 Rotating an Object 4 275
Laying out Objects Automatically Click Auto Arrange Object in the tool bar. This automatically lays out objects. Alternatively, you may select Auto Ar- range Object from the Object menu. Note • The object layout order varies depending on the Order setting in the Page Options Dialog Box →P.263 dialog box. Aligning Objects You can align objects systematically. 1. Select multiple objects. 2. Click the align button from the toolbar. Alternatively, you may select the align menu from the Object menu.Align Top Lays out the objects, justifying them to the top. Windows Software > Free Layout > Laying out Objects Automatically iPF8154 276
Center Vertically Lays out the objects, justifying them to the vertical center. Align Bottom Lays out the objects, justifying them to the bottom. Align Left Lays out the objects, justifying them to the left. Windows Software > Free Layout > iPF815 Aligning Objects 4 277
Center Horizontally Lays out the objects, justifying them to the horizontal center. Align Right Lays out the objects, justifying them to the right. Changing the Object Overlapping Order You can change the object overlapping order. 1. Select an object. 2. Select the Overlapping Order menu from the Object menu.Note • The order of overlapping affects the order of objects automatically laid out. • You can also select by clicking the right button of the mouse on an object. Windows Software > Free Layout > Changing the Object Overlapping Order iPF8154 278
Bring to Front Moves the object to the frontmost position. Send to Back Moves the object to the backmost position. Bring Forward Moves the object one position to the front. Windows Software > Free Layout > iPF815 Changing the Object Overlapping Order 4 279
Send Backward Moves the object one position to the back. Pasting a Copied or Cut Object 1. Click Copy or Cut from the toolbar. Alternatively, you may select Copy or Cut from the Edit menu. 2. Click Paste from the toolbar. Alternatively, you may select Paste from the Edit menu.Note • The copied or cut object is laid out at the end of the page. • You can also select by clicking the right button of the mouse on an object. • In order to paste an object on any position that you like, you can paste the object with Pointed Paste by clicking the right button of the mouse on any position that you want. Windows Software > Free Layout > Pasting a Copied or Cut Object iPF8154 280
Folded Duplex Window This window is displayed if you select Folded Duplex from the Edit menu after selecting an object. Using the Folded Du- plex function allows you to print with fold lines added. The Folded Duplex window consists of the menu and tool bars, layout area and status bar. Note • The toolbar and status bar can be toggled between hidden and displayed from the View menu.Menu Bar This allows you to select menus required for operations. Tool Bar This allows you to select tool buttons required for major operations. Windows Software > Free Layout > iPF815 Folded Duplex Window 4 281
Layout Area This allows you to check the arrangement and orientation of objects. Status Bar This shows the paper source, roll paper width, and output size. Finished Size Settings Dialog Box This dialog box is displayed when you select Finished Size Settings from the Edit menu. This allows you to configure finished size settings. Finished Size Selects the method for setting the finished size. Windows Software > Free Layout > Finished Size Settings Dialog Box iPF8154 282
The following settings are available for the finished size. Setting Details Fit Roll Paper Width Prints by automatically enlarging or reducing the entire document so that the width of the document matches the roll paper width. Specify Folded Size Prints by automatically enlarging or reducing the entire document to match the size of the paper. Select the actual size of the paper you want to print on in Fit Paper Size. Rotate Page 90 degrees (Con- serve Paper) Prints by rotating pages by 90 degrees. Pages are automatically rotated if they will fit within the roll paper width when rotated, and are not rotated if they will not fit within the roll paper width. Binding Settings Dialog Box This is displayed when you select Binding Settings from the Edit menu. This allows you to configure the binding edge settings. Binding Edge Configures the binding edge when folding paper. The following settings are available for the binding edge. Setting Details Bottom Prints by placing the binding margin (gutter) at the bottom of the document. Top Prints by placing the binding margin (gutter) at the top of the document.Binding Configures the binding margin (gutter). Prints by creating a binding margin (gutter) of the specified size. Enter the margin size as a number. Note • The values that can be entered are 0 to 50 (mm). Windows Software > Free Layout > iPF815 Binding Settings Dialog Box 4 283
Print Fold Lines Configures the color and type of fold lines. Note • To not print fold lines, clear the Print Fold Lines checkbox.Fold Line Color You can select the fold lines. Fold Line Type You can select the fold lines. The following settings are available for the fold line type. Setting Details Solid Line You can print the solid line as the frame style. Dotted Line You can print the dotted line as the frame style. Dashed Line You can print the dashed line as the frame style.Only Print Center and Edges To print fold lines at the center and both edges, select the Only Print Center and Edges checkbox.Prints using Folded Duplex Allows you to produce duplex printing by combining two pages and folding them. 1. Select two objects from the layout area of Free Layout. 2. Select Folded Duplex from the Edit menu of Free Layout. Open the Folded Duplex window and arrange the selected objects in the layout area. 3. Open the Finished Size Settings dialog box from the Edit menu. 4. Select Fit Roll Paper Width or Specify Folded Size in Finished Size. Note • Rotate Page 90 degrees (Conserve Paper) is also available when Specify Folded Size is selected. 5. Click OK to save the settings. 6. Open the Binding Settings dialog box from the Edit menu. 7. Select Bottom or Top in Binding Edge. 8. Specify the Binding width in Binding. Windows Software > Free Layout > Prints using Folded Duplex iPF8154 284