Canon Imageprograf Ipf825 Mfp M40 User Guide
Have a look at the manual Canon Imageprograf Ipf825 Mfp M40 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1. This sets the BFormat for and CPaper Size. Note • The configuration method varies depending on the OS and application software you are using. If Page Setup is displayed in the application menu, the settings are configured by opening the Page Attributes dialog box from Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when you select Print from the application software menu. 2. Select the printer in the APrinter list. 3. In the FPaper Size list, click the size of the original. In this case, click ISO A4. 4. If you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and then select Print from the application software menu. Enhanced Printing Options > Printing enlargements or reductions > iPF815 Resizing Originals to Fit the Roll Width (Mac OS X) 3 75
5. Access the Main pane.6. In the AMedia Type list, select the type of paper that is loaded. In this case, click Plain Paper. 7. Make your selection in the EPrint Target list. 8. Make your selection in the FPrint Quality list. 9. Access the Page Setup pane. 10. Select and click a roll paper in the APaper Source list. Enhanced Printing Options > Printing enlargements or reductions > Resizing Originals to Fit the Roll Width (Mac OS X) iPF8153 76
11. Make sure the width of the loaded roll is displayed in the BRoll Width list—in this case, 16 in. (406.4mm). Note • If the width of the roll loaded in the printer is not shown in BRoll Width , click LPrinter Informa- tion on the Main pane to update the printer information. 12. Make sure the CPage Size setting matches the original size as selected in CPaper Size in the Page Attributes dialog box—in this case, ISO A4.13. Select the DEnlarged/Reduced Printing check box. 14. Click FFit Roll Paper Width. 15. Confirm the print settings, and then click MPrint to start printing. Note • For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.429 " Resizing Originals by Entering a Scaling Value You can freely adjust the size of originals by enlarging or reducing them as desired. Enlarged/Reduced Printing Enlarge or reduce the original in the printer driver, as desired. Enhanced Printing Options > Printing enlargements or reductions > iPF815 Resizing Originals by Entering a Scaling Value 3 77
Scaling Enlarge or reduce originals by a particular amount, as desired. For instructions on entering a scaling value to resize originals, refer to the following topics, as appropriate for your comput- er and operating system. •Resizing Originals by Entering a Scaling Value (Windows) →P.78 • Resizing Originals by Entering a Scaling Value (Mac OS X) →P.80 Note • For better printing results when enlarging photos from a digital camera in TIFF or JPEG format, use an im- age-editing application software such as Adobe Photoshop to specify an image resolution of 150 dpi or moreat actual size. Resizing Originals by Entering a Scaling Value (Windows) This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example. •Document: Any Type • Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in]) • Paper: Roll paper • Paper type: Plain Paper • Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) Important • In borderless printing, you cannot resize originals by entering a scaling value. 1. Choose Print in the application menu. 2. Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv- er Dialog Box from Applications (Windows) →P.211 ") Enhanced Printing Options > Printing enlargements or reductions > Resizing Originals by Entering a Scaling Value (Windows) iPF8153 78
3. Make sure the Main sheet is displayed. 4. In the AMedia Type list, select the type of paper that is loaded. In this case, click Plain Paper. 5. Select the printing application in the EPrint Target list. 6. Click the Page Setup tab to display the Page Setup sheet. Enhanced Printing Options > Printing enlargements or reductions > iPF815 Resizing Originals by Entering a Scaling Value (Windows) 3 79
7. Select and click a roll paper in the LPaper Source list. 8. Select the width of the loaded roll in the MRoll Paper Width list—in this case, ISO A2/A3 Roll (420.0mm). 9. In the APage Size list, click the size of the original as specified in the application. In this case, click ISO A4. 10. Select the CEnlarged/Reduced Printing check box. 11. Click ISO A4 in the GPaper Size list. 12. Click FScaling and enter 120. Note • You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and right edges of the paper will not be printed. • If the original size after enlargement or reduction is smaller than the paper size, the original is printed in the upper-left corner. In this case, you can center originals by selecting EPrint Centered on the Layout sheet. 13. Confirm the print settings and print as desired. Note • For tips on confirming print settings, see " Confirming Print Settings (Windows) →P.206 " Resizing Originals by Entering a Scaling Value (Mac OS X) This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example. •Document: Any Type Enhanced Printing Options > Printing enlargements or reductions > Resizing Originals by Entering a Scaling Value (Mac OS X) iPF8153 80
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in]) • Paper: Roll paper • Paper type: Plain Paper • Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. This sets the BFormat for and CPaper Size. Note • The configuration method varies depending on the OS and application software you are using. If Page Setup is displayed in the application menu, the settings are configured by opening the Page Attributes dialog box from Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when you select Print from the application software menu. 2. Select the printer in the APrinter list. 3. In the FPaper Size list, click the size of the original. In this case, click ISO A4. 4. If you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and then select Print from the application software menu. Enhanced Printing Options > Printing enlargements or reductions > iPF815 Resizing Originals by Entering a Scaling Value (Mac OS X) 3 81
5. Access the Main pane.6. In the AMedia Type list, select the type of paper that is loaded. In this case, click Plain Paper. 7. Make your selection in the EPrint Target list. 8. Make your selection in the FPrint Quality list. 9. Access the Page Setup pane. 10. Select and click a roll paper in the APaper Source list. Enhanced Printing Options > Printing enlargements or reductions > Resizing Originals by Entering a Scaling Value (Mac OS X) iPF8153 82
11. Make sure the width of the loaded roll is displayed in the BRoll Width list—in this case, ISO A2/A3 (420.0mm). Note • If the width of the roll loaded in the printer is not shown in BRoll Width , click LPrinter Informa- tion on the Main pane to update the printer information. 12. Make sure the CPage Size setting matches the original size as selected in CPaper Size in the Page Attributes dialog box—in this case, ISO A4.13. Select the DEnlarged/Reduced Printing check box. Enhanced Printing Options > Printing enlargements or reductions > iPF815 Resizing Originals by Entering a Scaling Value (Mac OS X) 3 83
14. Click GScaling and enter 120. Note • You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of the paper will not be printed. • If the original size after enlargement or reduction is smaller than the paper size, the original is printed in the upper-left corner. In this case, you can center originals by selecting the JPrint Centered check box. 15. Confirm the print settings, and then click MPrint to start printing. Note • For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.429 " Enhanced Printing Options > Printing enlargements or reductions > Resizing Originals by Entering a Scaling Value (Mac OS X) iPF8153 84