Canon Fax L390 User Guide

Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder)
11-2
Making Copies11
Specifying the Paper Size and Type 
(Common for Cassette and Multi-Purpose Feeder)
NOTE•When making copies on A4-size paper after having continuously copied on paper smaller than A4-size paper, the 
copies may be dirty. To prevent copies from being dirty, wait about 1 minute before making copies.•The paper in the multi-purpose feeder is fed prior to the paper in the cassette.•The settings changed in the...

Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder)
11-3
Making Copies11
●When  is selected:
❑
Press [ (-)] or [ (+)] to select  or  ➞ press [OK].
❑
Use the numeric buttons, or press [ (-)] or [ (+)] to specify vertical and horizontal sizes of the paper in 
millimeters (mm).
Available setting range in : 127 mm to 356 mm 
Available setting range in : 76 mm to 216 mm 
❑
Press [OK].
Repeat the steps above to specify both vertical and horizontal sizes of the paper.
6
Press...

Setting Enlarging/Reducing
11-4
Making Copies11
Setting Enlarging/Reducing
You can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios.
Enlarging/Reducing Using Preset Copy Ratios
1
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Enlarge/Reduce].
3
Press [ (-)] or [ (+)] to select the copy ratio ➞ press [OK].
You can select from the following:
-200% MAX.
-141% A5 ➞ A4 
-100%
-70% A4 ➞ A5 
-50% MIN.NOTE•If the  setting of  menu...

Setting Enlarging/Reducing
11-5
Making Copies11
Enlarging/Reducing Using Custom Copy Ratios 
1
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Enlarge/Reduce] twice.
3
Use the numeric buttons to enter the copy ratio ➞ press [OK].•You can enter the copy ratio from 50% to 200%, selectable in 1% increments.•Even after entering the copy ratio, you can use [ (-)] or [ (+)] to adjust the copy ratio. To increase the copy 
ratio, press [ (+)]. To decrease the copy...

Improving Copied Image
11-6
Making Copies11
Improving Copied Image
Adjusting the Image Quality (Resolution)
You can adjust image quality to the appropriate level best suited for a document with text or photos. 
3 modes are available for adjusting the image quality.1
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Image Quality] repeatedly until the image quality you want appears.
You can select from the following:
-  for text-only documents
-  for documents...

Improving Copied Image
11-7
Making Copies11
Adjusting Manually1
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Exposure] twice to select the manual mode.
3
Press [ (-)] or [ (+)] to adjust the copy exposure ➞ press [OK].
For a lighter copy exposure, press [ (-)]. 
For a darker copy exposure, press [ (+)].NOTEWhen setting the exposure lighter, the indicator moves to the left. When setting the exposure darker, the indicator 
moves to the right.
➞
DENSITY
-LT...

Special Features
11-8
Making Copies11
Special Features
The machine can perform the Collate Copy and Reserve Copy.
Collate Copy
The collate copy allows you to sort copies in page order. It is convenient when you make multiple 
copies of multiple page documents. To use this feature, you need to set  to ‘ON’ in the 
 menu. (See p. 16-5.)
Follow the procedure below to set the Collate Copy function to ‘ON’:1
Press [Menu].
2
Press [ (-)] or [ (+)] to select  ➞ press [OK].
3
Press [ (-)] or [ (+)] to select  ➞...

Special Features
11-9
Making Copies11
Reserve Copy
This feature allows you to reserve the next job while the machine is printing out a current job.1
Load the document to be reserved in the ADF.
For details on how to load documents, see “Loading Documents in the ADF,” on p. 6-3.
2
Use the numeric buttons to enter the number of copies.
You can set up to 99 copies.
3
Adjust any necessary settings for your document.•Press [Image Quality] to select the scanning resolution. (See “Adjusting the Image Quality...

Special Features
11-10
Making Copies11
Confirming the Copy Job You Reserved1
Press [Stop/Reset] while the machine is printing out.
2
Press [ (-)] or [ (+)] to confirm the reservation number and number of documents.NOTETo finish confirming, press [Stop/Reset].
Deleting the Copy Job You Reserved1
Press [Stop/Reset] while the machine is printing out.
2
Press [ (-)] or [ (+)] to display the job to be deleted ➞ press [OK].
3
Press [ (-)] for .
The reserved copy job is deleted.NOTE•To cancel deleting the copy...

CHAPTER
Checking the Status of Copy, Fax, Print and Report Jobs
12-1
12
System MonitorChecking the Status of Copy, Fax, Print and Report Jobs
Use [System Monitor] to confirm and delete the jobs.
When using [System Monitor], the LCD displays the jobs in the following order in each mode.
In Copy mode, In Fax mode,
- COPY STATUS - FAX MONITOR
- FAX MONITOR - COPY STATUS
- PRINT STATUS - PRINT STATUS
- REPORT STATUS - REPORT STATUS
Confirming Transmission Status
Follow the procedure below to confirm the...