Brother Printers Mfc 7750 Laser 600x600dpi Super G3 Fax Owners Manual

107MESSAGE CENTER
Retrieving Memory Status List
You can retrieve the Memory Status List from a remote fax machine to see if
you have any fax messages.
1Dial your MFCÕs number.
2When you hear the beep, immediately enter your Remote Access Code
(
1 5 9 ).
3When you hear two short beeps, use the dial pad to press 9 6 1.
4Using the dial pad, enter the number (up to 20 digits) of the remote fax
machine where you want the Memory Status List forwarded, and then
press  
 .
You cannot use  and  as dial numbers....

CHAPTER TWELVE108
Changing Fax Forwarding Number
You can change the default setting of your fax forwarding number from a
remote fax machine.
1Dial your MFCs number.
2When you hear the beep, immediately enter your Remote Access Code
(
1 5 9 ).
3When you hear two short beeps, enter 9 5 4.
4Enter the new telephone number of the remote fax machine where you
want your fax messages forwarded, and then press 
 .
You cannot use  and  as dial numbers.  However, if you want to store a
pause, press 
.
5To retrieve...

109
Setting Up the Fax Machine and
Computer to Work Together
Multi-Function Link Pro software (MFL Pro) turns your fax machine into a
multi-function center, by enabling you to use your fax machine as a printer
and a scanner and to use it to fax from Windows
¨ applications in your
computer.
Before you install the Multi-Function Link Pro,
you must read the README.WRI file in the
root directory of the CD-ROM
(or Floppy Disks) for important last-minute
installation information and troubleshooting
tips.
13...

110CHAPTER THIRTEEN
Before You  Install
Multi-Function Link Pro
(For MFC 4650, MFC 6650MC and MFC 7750 Only)
If You DonÕt Have a CD-ROM Drive
All software is supplied on CD-ROM. If you need a Floppy Diskette version
(PCI-2DSK), call Brother at 1-888-879-3232 (USA) or 1-800-668-2768
(from within Canada). To order the appropriate set of diskettes, you must
tell the Brother Representative the version of Windows
¨ you are using and
your Brother MFC model number. (Only Multi-Function Link Pro and
Visioneer...

111USING THE MFC WITH YOUR COMPUTER
Connecting the MFC to the Computer
You must connect the MFC to your computer with the induded
bi-directional IEEE-1284 compliant parallel cable.
1Make sure to unplug the MFC power cord from the electrical outlet
before connecting the parallel interface cable.
Also, make sure the computer is turned off and unplugged from the
electrical power before you connect the interface cable.
2Connect the parallel interface cable to the parallel interface port of the
MFC and secure...

112CHAPTER THIRTEEN
Printer Driver for the MFC 4350
Your MFC 4350 is a 3-in-one multi-function centerÑits a fax, copier and
printer.  Before you can print from Windows
¨ on your PC, you must first
install the printer driver that is included on 3.5 inch floppy diskettes.
Installing MFC 4350 Printer Driver
If you are using Windows NT¨ Workstation Version  4.0:
1Click the Start button in the Taskbar.
2Select Settings, then Printers.
3Double-click on the Add Printer wizard.
The Add Printer Wizard window...

113USING THE MFC WITH YOUR COMPUTER
4Select My Computer and click the Next button.
5Select the Port you will use (we recommend LPT1), and click the Next
button. 

114CHAPTER THIRTEEN
6Click the Have Disk button.
The Install From Disk window appears:
7Insert the floppy disk for the MFC 4350 printer driver into drive A, and
click the OK button.
Follow the screen prompts to complete the installation.
If you are using Windows¨ 3.1 or  3.11:
1Insert the floppy disk for the MFC 4350 printer driver into drive A.
2From the Program Manager, click on File, then Run.
3Enter A:\SETUP. 

115USING THE MFC WITH YOUR COMPUTER
If you are using Windows¨ 95, 98:
1Insert the floppy disk for the MFC 4350 printer driver into drive A.
2Click the Start button in the Task bar.
3Select Run.
4Enter A:\SETUP. 

116CHAPTER THIRTEEN
Installing True Type Fonts for
MFC 4350
For Windows¨ 3.1 and 3.11:
1Insert the disk for True Type Fonts for MFC 4350.
2In the Program Manager, double-click the Main icon.
3In the Main window, double-click the Control Panel icon.
4In the Control Panel window, double-click the Fonts icon.
5In the Fonts window, click the Add... button.
6Select A as the Drive.
7Select the fonts you want to install and click the OK button.
For Windows¨ 95, 98 and Windows NT¨ Workstation
Version 4.0:...